Universalus apdirbimo centras

DMG DMC 105 V linear 5 Achs

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 Gjdpfxst Hww Do Afdsbn _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: geras (naudotas), Please read the technical specifications thoroughly. If the machine is of interest to you as an investment, we kindly ask you to provide your complete credentials including a valid telephone number and email address when requesting an official offer. DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2 Axis CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Gedpfx Ajxz Rdasfdjbn Travel ranges (X/Y/Z): 350 x 240 x 340 mm Spindle speed, infinitely variable: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: Max. 55/80 Nm Universal tilt/rotary table: 400 x 290 mm Table load capacity: 100 kg Distance spindle nose/table (min./max.): 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotation range: 360 degrees Swivel range: degrees total power requirement: kVA Weight: approx. 1750 kg Technical data non-binding! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servo motor with toothed belt - 2 gear stages - Full enclosure with sliding door - Swivelling control panel - Coolant nozzles at vertical head - Coolant unit - Chip tray with coolant tank - Electronic handwheel - Machine mounts - Machine lamp - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It stands out due to its versatility, with the additional manually operated rotary/swivel table allowing five-sided machining. Condition: Good to very good. Comes from a vocational training center, see pictures. Can be tested under power.

Būklė: geras (naudotas), Gamybos metai: 2017, Ref. No.: 10596 Manufacturer: HELLER Model: H - 2000 Year of manufacture: 2017 Control type: CNC control Controller: Siemens 840 D Location: Halberstadt Country of origin: Germany Machine No.: 56XXX X travel: 630 mm Y travel: 630 mm Z travel: 630 mm B axis: 0.001° Table load capacity: 500 kg Max. tool length: 350 mm Max. tool diameter: 160 mm Tool holder: HSK 63 Number of magazine tool positions: 80 Spindle speed: 16,000 rpm Tool changer: Double gripper Max. workpiece height: 850 mm Max. torque: 95 Nm Rapid traverse X/Y/Z: 60 mm/min Rapid traverse X axis: 80 m/min Rapid traverse Y axis: 80 m/min Rapid traverse Z axis: 90 m/min Spindle motor power: 40 kW Internal coolant supply: 50 bar Number of pallets: 2 Pallet size (L x W): 400 x 500 mm Spindle run time: 1,000 h Operating hours: 3,000 h Max. workpiece interference diameter: 720 mm Media interface: 5-way Additional information: - Equipped with NC rotary table - State-of-the-art spindle technology - Ideal for precision machining tasks - Spindle hours: 1,000 - Pallet manually rotatable 4 x 90° - Hydraulic pressure: 200 bar - Fast drill breakage detection Godjx Hn D Dopfx Afdobn Machine can be inspected under power by prior arrangement.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Gbedpovibc Hjfx Afdjn Module – max. 0.5 – 10 Pressure angle 15 – 25° Speed 2800 rpm Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Finishing and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM,... Right adjustment plate with micrometer screw adjustment, axial Left adjustment plate with micrometer screw adjustment, radial 2 precision motor spindles for mounting diamond wheels.

Būklė: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Godpfot Hw N Tsx Afdebn Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.

Būklė: naudotas, Gamybos metai: 1987, Technical details: Number of spindles: 8 Spindle passage: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles Max. nominal passage D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Gbedpeiay Sfjfx Afdon Independent feed in positions 2/3 Electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Oil operation Including loading magazine IEMCA PRA40/37/F, year 1987 (bundle loader) Painted in light blue and light grey Tool configuration may differ from the illustrations. Please contact us for more information and photos via email (at) or *

Būklė: naudotas, Gamybos metai: 2001, Sukimosi skersmuo 340 mm Sukimosi ilgis 750 mm Valdymas SYSTEM TX 8H Veleno perėjimo skersmuo 80 mm Apskritimo skersmuo virš skersinio stalo 530 mm Apskritimo skersmuo virš lovio 665 mm Pagrindinio veleno greičių diapazonas 3.150 min/-1 Pagrindinio veleno variklio galia 22 kW Įrankių vietų skaičius 12 pozicijų. Mūsų vertinimu, įrenginys yra geros naudotos būklės, apžiūrėti galima prijungus prie elektros pagal susitarimą. Yra 2 įrenginiai. Kaina už vienetą. 1 įrenginys: - Nuotraukos 1-5 - Darbo valandos apie 55.790 h 2 įrenginys: - Nuotraukos 6-10 - Darbo valandos apie 54.347 h Techninės charakteristikos ir priedai: - Y ašis Gsdpfxexwdw Ej Afdobn - Priedų paketas su fiksuotais ir varomais įrankių laikikliais - Drožlių transporterio sistema Priedai, darbo įrankiai ir spaustuvai, matomi nuotraukose, į pristatymo komplektą įtraukiami tik jei tai nurodyta papildomoje informacijoje. Techniniai duomenys ir informacija gali būti keičiami, galimi netikslumai. Galimas tarpinis pardavimas!

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160 mm Wheel width 355 mm Module - max. 4.5 Module - min. 0.5 Centre distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Gbjdsvz Ec Ijpfx Afdsn Wheel diameter - max. 160/175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Būklė: naujas, Saw blade diameter: 370 mm Cutting range at 90 degrees, round: 120 mm Cutting range at 90 degrees, square: 100 mm Cutting range at 90 degrees, rectangular: 180x100 mm Working height: 925 mm Saw blade speed: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirements: approx. 1.9 x 1.45 x 2.1 m SPECIAL PROMOTIONAL PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20192) · Miter cutting left 60° / right 45° · Hydro-pneumatic control of saw unit · Electro-pneumatic material feed unit · Smooth-running, high-torque worm drive with large g ear reduction, integrated into a rigid cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, also with lateral quick adjustment for miter angle changes · Precision prismatic guide for the drive head, adjustable on the side · Especially robust machine base with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time, etc. · Adjustable water cooling · Adjustable cutting pressure Gbedsd Iin Hepfx Afdon NOTE: Price does not include saw blade! (Saw blade price: €204)

Būklė: naudotas, Gamybos metai: 2008, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse on X-Y-Z axes: X/Z: 30 m/min / Y: 12 m/min C-axis rapid traverse speed: 1000 rpm Tool turret - number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical system - voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions (LxWxH) approx.: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions (LxWxH): approx. 2.9 x 0.6 x 0.55 (0.38 t) m Chip tray dimensions (LxWxH): approx. 1.6 x 1.3 x 0.25 (0.2 t) m Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features C-axis, E-axis, Y-axis, and W-axis. Driven tools possible in all turret stations. Godpevvtpxofx Afdsbn Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooling unit Including hinged belt chip conveyor Chip tray Compressed air gun Note: The machine is offered WITHOUT any chucks as shown!