CNC tekinimo ir frezavimo centras

DMG Mori NLX 2500/700

Būklė: naudotas, Gamybos metai: 2014, Maximum turning diameter: 366 mm Turning length: 705 mm Control system: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Sub-spindle speed range: 6,000 rpm Sub-spindle drive power: 11 / 7.5 kW Spindle nose: JIS A2-5 Spindle bearing diameter: 85 mm Spindle bore: 43 mm Max. usable bar diameter (–): mm Chuck diameter: 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool holder: BMT 60 Square tool height: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Driven tool speed range max.: 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total power requirement: 40 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Center DMG MORI - NLX 2500 SY / 700 - Main and sub-spindle - C-axis - Y-axis - Driven tools Lajdpju Hq Rlsfx Abrsb

Būklė: naudotas, Gamybos metai: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore: 43 mm C-axis: 0.001° X-travel: 260 mm Z-travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Square tool shank height: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Speed range – driven tools max.: 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total connected load: 41 kVA Machine weight approx.: 6.4 t Installation dimensions approx.: 5.0 x 3.0 x 2.3 m CNC turning and milling center Ledpfx Asvy Ig Hsbreab DMG MORI – NLX 2500 SY / 700 - Sub spindle - Driven tools - C and Y axis

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 10 168 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL254120635, CNC tekinimo staklės Gamintojas: DMG MORI Tipas: NLX 2500 SY 700 su WH10 automatizacija Pagaminimo metai: 2012 Tekinimo skersmuo: 460 mm Tekinimo ilgis: 795 mm Valdymas: MORI SEIKI M730 BM Ljdjy Szwhopfx Abroab Apsisukimo skersmuo virš stalčiaus: 590/360 mm Veleno pratekėjimas: 80 mm Poslinkiai X/Z: 260/795 mm Bendras galios poreikis: 40 kVA Staklių svoris: apie 6,4 t Užimama vieta: apie 3.994 x 3.056 x 2.187 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 6 147 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7023000088B, Type of machine: CNC Turning and Milling Centre Manufacturer: DMG MORI Model: NLX2500SY/700 Year of manufacture: 2015 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: by arrangement Delivery terms: ex works Additional information: CNC Turning and Milling Centre DMG MORI NLX2500SY/700 Max. turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Sub spindle bore: 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Ledpfx Aey Sxuksbroab Number of tool stations: 12 positions Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Speed range – driven tools max.: 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total power requirement: 41 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Centre DMG MORI - NLX 2500 SY / 700 - Sub spindle - Driven tools - C, Y axis

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, veikimo valandos: 2 770 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL257181158, tekėjimo ilgis: 705 mm, X ašies eiga: 260 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 795 mm, sūpynės skersmuo virš skersinio vežimo: 742 mm, sūpynės skersmuo virš skersinio stumdomo: 920 mm, Attention – some photos of milling accessories from other machines were mistakenly included in this auction listing; these have now been removed. Please refer to the updated scope of delivery as shown in the current images – approximately half of the accessories pictured pertain to this machine. TECHNICAL DETAILS Working Area Swing diameter over bed (max.): 920 mm Swing diameter over cross slide (max.): 742 mm Turning length (max.): 705 mm Bar capacity: 80 mm Travel X-axis: 260 mm Travel Y-axis: 50 mm Travel Z-axis: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Sub-Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inch Spindle bore: 45 mm Lodpfx Abjy A Nf Ieroab Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Tool shank cross-section: 25 mm Max. driven tool speed: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation footprint: 3,347 x 2,106 mm Weight: 5,820 kg EQUIPMENT Y-axis Sub-spindle Main spindle with 10-inch chuck Sub-spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar feeder

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7024NL256160890J, veleno greitis (maks.): 10 000 aps./min, Y ašies eiga: 200 mm, sukimosi greitis (maks.): 4 000 aps./min, Strypo skersmuo (maks.): 80 mm, atstumas tarp centrų: 700 mm, Condition: Ball screw drives in X, Y, and Z axes are new + major maintenance package carried out about a year ago (machine has not been in use since)! TECHNICAL SPECIFICATIONS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar diameter: 80 mm Mount: MT5, live center without center tip Turret: 12 stations, bolt-mounted turret Projection length for driven tools: ±100 mm Assemblies: Integrated bearing MK4 for center tip Lsdpsy A Icrofx Abrjab Chip and Cooling System Scraper-type chip conveyor: with magnetic separator, discharge height approx. 1,000 mm Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at the chuck, incl. high-performance pump Compressed air blow-off system for tool shanks Compressed air blow-off system for tailstock center tip Line filter for the cooling system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% DC / 50% DC / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal tower red, yellow, green, blue EtherNet/IP interface for automation Robot interface for DMG Mori Seiki gantry robots Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without chuck, tool presetting device, or clamping devices.

Būklė: naudotas, Gamybos metai: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm Control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X axis: 260 mm Ljdpfx Aoyxpv Ssbrjab Travel - Y axis: 100 (±50) mm Travel - Z axis: 795 mm Rapid traverse - longitudinal/plan: 30 / 30 m/min Rapid traverse B axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 speed: 4500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Driven tool speed: 10,000 rpm Driven tool drive power: 3.7/5.5/5.5 kW Driven tool torque: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar feeder interface Parts catcher spindle 1 and spindle 2 Workpiece and total piece counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Parts outfeed conveyor Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Presetting device spindle 1 & 2 Coolant shower 1m short bar loader magazine IRCO High-performance precision turning center with Y-axis and counter spindle. Perfectly suited for machining complex turned parts with off-center milling operations. Easy programming of the machine via CELOS-MAPPS 4 dialog control. Machine can be demonstrated under power and with chips. Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Būklė: geras (naudotas), Gamybos metai: 2017, veikimo valandos: 8 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL2561708843, ašies skaičius: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Ledpfxjyzxcgj Abrsab Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 Max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): 740 Bar capacity (mm): 80 Tool Magazine Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tools power (kW): 5.5/4.9/4.2 (3 min/5 min/continuous) Rapid traverse rate (m/min): 30 Main Spindle Max. spindle speed (rpm): 4,000 Spindle motor power (kW): 18.5/18.5/15 (25%ED/50%ED/continuous) Max. torque (Nm): 49 Sub-spindle Max. spindle speed (rpm): 5,000 Spindle motor power (kW): 11/7.5 (25%ED/continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System Tank capacity (L): 366 Equipment Chip conveyor Signal light Machine hours: Power-on hours: 19,393 Cutting hours: 8,800 Rated power (kVA): 48 Base Machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Depicted tools, driven tools and both chucks are not included in the scope of delivery.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 23 501 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 705 mm, tekėjimo skersmuo: 366 mm, ašies variklio galia: 18 W, veleno greitis (min.): 4 000 aps./min, veleno greitis (maks.): 10 000 aps./min, X ašies eiga: 260 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 795 mm, sukimosi greitis (maks.): 10 000 aps./min, bendras aukštis: 2 395 mm, bendras ilgis: 5 330 mm, bendras plotis: 4 100 mm, bendras svoris: 8 360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Ljdpfx Aboywtwwerjab Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 max. Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool Magazine Tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed driven tools rpm: 10,000 Driven tool output kW: 5.5 / 4.9 / 4.2 (3 min/5 min/continuous) Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5 / 18.5 / 15 (25% duty/50% duty/continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11 / 7.5 (25% duty/continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Touch probe Paper band filter Machine Hours: Power-on hours: 23,501 Cutting hours: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Būklė: naudotas, Gamybos metai: 2016, Swing diameter: 366 mm Turning length: 700 mm Control: Celos Mitsubishi M730U Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Max. spindle speed: 4,000 rpm Drive power - main spindle: 18.5/18.5/15 kW Max. bar diameter: 80 mm Number of tool stations: 12 positions Tool turret: BMT 80 X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Tailstock taper: MT5 Operating hours: approx. 20,564 h Power-on hours: approx. 28,664 h Machine weight: approx. 4.7 t The machine has been overhauled with the following components: - Ball screws for X, Y and Z axes - New main spindle - Complete maintenance package - Newly adjusted and calibrated As such, the machine is in as-new technical condition. Two machines available. Price per unit. Technical features: Laedpfx Absyvvt Soreb - Tool turret, 12 stations, BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang length for driven tools: 100 mm - Scraper belt chip conveyor - Coolant system with increased pressure, 5 bar Accessories: - Coolant shower at the main spindle chuck - Compressed air blow-off system for tool cutting edges - Inline filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical interface for oil mist separator, 150 mm - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the delivery scope if specified in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!