Dviejų diskų šlifavimo staklės - vertikalios.

DISKUS DDW 900 IV CRV- CNC

Gamybos metai: 1992, Sąlyga: naudotas, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9,500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece feed and IONIC measuring control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 high mm Workpiece data: Grinding height: approx. 1.5 – 50 mm Grinding width: approx. 20 – 120 mm Vertical slide adjustment, each: approx. 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed continuously adjustable: 40 - 235 mm/sec. Grinding wheel speed (30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (per spindle): 37 kW Total drive approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (top and bottom infeed, dresser, and workpiece table rotation), direct input of all grinding data, and in conjunction with • IONIC measuring control no. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers corresponding infeed of the grinding wheels, continuous measurement data displayed on the monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for the drive motors and the grinding wheel speed • Gantry design for increased rigidity and improved grinding accuracy • Rotational workpiece transport with continuously variable speed control as the 4th axis • Position control device for monitoring the position height of the lower grinding wheel • 2 adjustable workpiece hold-downs at both in-feed and out-feed, with height monitoring, simple raw part stacking device, and finished part discharge via conveyor belt • Semi-inclined, side-mounted grinding wheel dressing unit with pre-programmable dressing sequence, integrated as CNC axis in the control, with safety shut-off • Large separate switch cabinet, automatic central lubrication system, advanced pneumatic setup • Large PROMATEC (F) coolant unit with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in large series, such as stamped parts, piston rings, hydraulic parts, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Iedpfxet Hw Naj Af Ioal Payment: net – upon receipt of invoice This represents a rare opportunity regarding both condition and price. If you require another grinding machine – especially from the manufacturer DISKUS – please send us your inquiry.

Sąlyga: naudotas, Gamybos metai: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total connected load: 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical Honing Machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial no.: 50 / 1790 _____ Max. honing diameter: 10 - 90 mm Max. honing depth: 30 - 450 mm Max. spindle stroke: 490 mm Spindle throat: 400 mm Mounting height under spindle nose top approx.: 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Spindle speeds, infinitely variable: 160 – 830 rpm Stroke speed, infinitely variable: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW - 400 V - 50 Hz Weight approx.: 3,500 kg Overall machine height approx.: 4,000 / 3,300 mm Accessories / Special equipment: Iajdpfx Afst Hw T Se Iel • Machine equipped with SIEMENS S5 / Unipos 4.0 PLC for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, fault messages, etc. • With a fixed table 600 x 400 mm • Automatic shut-off after a preset time, followed by spindle return • Automatic motorized expansion of the honing tool via electromechanical feed head ESZ 90/1 D • Separate hydraulic unit, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: good to very good - ready for demonstration Delivery: ex stock - as inspected here Payment: strictly net - upon receipt of invoice

Sąlyga: naudotas, Gamybos metai: 2018, Siūlomas parduoti UR3 bendradarbiaujantis robotas – 6 ašių manipuliatorius, kurio keliamoji galia siekia 3 kg, o pasiekiamumas – 500 mm. Robotai buvo naudoti daugiausia demonstraciniais tikslais, todėl darbo valandų skaičius yra nedidelis, o jų būklė – puiki. Prieš išsiuntimą kiekvienas robotas bus nuodugniai patikrintas ir saugiai supakuotas. Iedjwdl Sgspfx Af Ijal

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2179, The Diskus DDS 750 XRE is a double-sided surface grinding machine from the DDS series by Diskus, engineered for precise flat and plunge grinding operations. While the exact manufacturing year 2012 is not specified, the technical specifications of the XRE variant are as follows: Technical specifications of the Diskus DDS 750 XRE * Grinding wheel diameter: 750 mm * Maximum workpiece diameter: * Through-feed grinding: 420 mm * Plunge-cut grinding: 300 mm * Grinding width: * Through-feed grinding: up to 180 mm * Plunge-cut grinding: up to 300 mm * Maximum material thickness: * Through-feed grinding: 30 mm * Plunge-cut grinding: 80 mm Ijdpfxswnrv To Af Ijal * Grinding spindle drive power: * Spindle 1: 48 kW * Spindle 2: 48 kW * Feed system: rotary table feed * Feed rates: * Maximum: 20 mm/min * Minimum: 240 mm/min * Dimensions: * Footprint (L × W): 4900 mm × 5000 mm * Overall height: 3100 mm * Weight: approx. 13,000 kg * Control system: Siemens 840 D CNC * Measuring control: Diskus IONIC 17A This machine is particularly suitable for the machining of workpieces made from corundum, CBN, or diamond and is used in sectors such as the automotive industry, gearbox manufacturing, hydraulic and pump technology, as well as the rolling bearing industry. For further information or specific inquiries regarding the 2012 year of construction, I recommend contacting Diskus Werke Schleiftechnik GmbH directly.

Gamybos metai: 1996, Sąlyga: labai geros būklės (naudotas), CARLO SALVI 246/TR PROGRESSIVE STAMPING MACHINE Used, in excellent condition Fully functional! Equipped with process monitoring control unit Option for complete overhaul and closed cutting system. Number of dies: 2 Number of punches: 4 Cutting force: 2,200 kg Max cutting diameter: 8 mm Max cutting length: 75 mm Isdep Am Ucopfx Af Ioal Max extraction before first die: 85 mm Max extraction before second die: 60 mm Stamping force: 26,000 kg Max punch-side extraction: 10 mm Max speed: 250 pieces/minute Available at HBR srl - Calolziocorte (LC)

Sąlyga: labai geros būklės (naudotas), Mahr Type: MarSurf GD 140 BG 22 Product information: The MarSurf GD 140 is a high-precision roughness and waviness measuring station from Mahr, designed for use in production metrology as well as in the metrology lab. It sets new standards in surface measurement technology through its high speed, safety, and flexibility. Product features: - Multifunctional: Measures roughness, waviness, and profile of workpieces. - Areas of use: Suitable for use in the measuring room or directly on the shop floor. - Software: Operated via user-friendly MarWin software: - EasyRoughness - MarWin software version: V12.20-06 SP1 Applications: Industry: Mechanical Engineering — Typical measuring objects: - Bearings, threads, threaded rods, ball screws, shafts, racks Industry: Production Metrology — Typical measuring object: - Contour measurement in a semi-automated process Industry: Automotive — Typical measuring objects: - Steering, braking systems, transmissions, crankshafts, camshafts, cylinder heads Industry: Medical Technology — Typical measuring objects: - Contours of hip and knee endoprostheses, medical screws, and dental implants Technical data – MarSurf GD 140 Feature / Value / Description - Resolution – Measuring range 1: 2.0 nm - Resolution – Measuring range 2: 0.2 nm - Start of traverse length (X): 0.1 mm - End of traverse length (X): 140.0 mm - Traverse length (Lt): 0.1 – 140 mm - Guide deviation: 0.20 µm / 60 mm, 0.40 µm / 140 mm - Measuring force: 0.7 mN - Measuring speed: 0.02 mm/s to 10 mm/s Ijdpfx Ajwlhwnsf Ijal - Positioning speed (X): 0.02 – 200 mm/s - Positioning speed (Z): 0.02 – 50 mm/s - Probe system: Skidless roughness probe – without skidded probe foot Probe arm lengths: - 45 mm (×1) - 67.5 mm (×1.5) - 90 mm (×2) - 112.5 mm (×2.5) - 135 mm (×3) Measuring range (depending on probe arm length): - ±250 µm (with 45 mm probe arm) - ±750 µm (with 135 mm probe arm) Technical data – Dimensions: - Dimensions (L × W × H): Length: 780 mm, Width: 535 mm, Height: 1240 mm - Maximum workpiece weight: 90 kg Additional features: - Manual TY adjustment (e.g. for lateral alignment) - Total weight (gross): 196 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and error!) Further questions can be answered by phone.

Sąlyga: paruoštas naudoti (naudotas), Two optical LED light curtain micrometers from Keyence are available. Repeatability: +/-0.03µm, sampling rate: 16,000 measurements/sec, light source: green InGaN LED. Documentation included. On-site inspection possible. Iasdpfjv R Exujx Af Iel

Sąlyga: naudotas, optical 360° angle gauge Iodpfxsgw Tw Ro Af Ijal