Šoninio paviršiaus šlifavimo staklės

Diskus Werke DSH 600/1000

Būklė: naudotas, Gamybos metai: 1999, X travel: 12,000 mm Y travel: 3,600 mm Z travel: 1,500 mm Spindle speeds: 3,000 rpm Control system: Heidenhain iTNC430 Milling head: 2 axes, indexed in 2.5° increments Vertical (Y axis): 3,600 mm Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7:231:3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Hedpfx Ajxwdygef Uel Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Su dviem apdirbimo moduliais, X ašis: -50 iki 725 mm, Y ašis: -200 iki 300 / -250 iki 250 mm, greitas judėjimas X, Y, Z ašyse: 18/12/30 m/min, valdymas: Siemens Sinumerik, temperatūros diapazonas: 5-40°C, srovės tipas/dažnis: 3 PEN/50 Hz, vardinė įtampa: AC 400V, valdymo įtampa: DC 24V, pagalbinė įtampa: AC 230V, prijungimo galia: 102 kVA, vardinė srovė: 148A, vardinė srovė (greita): 148A, saugiklis (lėtas): 160A, ilgis: 8000 mm, plotis: 3000 mm, aukštis: 4000 mm, svoris: apie 17 t, darbo valandų skaičius: apie 80 000 h. Mašina visiškai veikianti, Z ašies rutulinio sraigto pavarą (aplinkinis sraigtas) atnaujinta 2024 m., reguliariai prižiūrėta. Su dokumentacija, valdymo spintele, hidraulikos agregatu, filtravimo elementais ir drožlių transporterių. Galima apžiūra vietoje. Hjdowbuyzepfx Af Ujl

Būklė: geras (naudotas), Gamybos metai: 2000, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, stūmoklio plokštės plotis: 600 mm, bendras ilgis: 25 000 mm, bendras plotis: 27 000 mm, bendras aukštis: 47 000 mm, bendras svoris: 43 000 kg, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Light barrier by Sick Separate control cabinet by Rittal Side walkways/passages Hsdpfxotiwgio Af Ujl Floor-level installation

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 4ROLL, apatinio volelio skersmuo: 470 mm, viršutinio volo skersmuo: 470 mm, šoninio volelio skersmuo: 420 mm, volelio skersmuo: 470 mm, vėjo ilgis: 3 050 mm, darbinis plotis: 3 050 mm, darbinio aukščio: 1 800 mm, maks. lakšto storis: 50 mm, plieno lakšto storis (maks.): 45 mm, aliuminio lakšto storis (maks.): 45 mm, vario lakšto storis (maks.): 45 mm, bendras svoris: 43 000 kg, bendras ilgis: 7 700 mm, bendras plotis: 2 410 mm, bendras aukštis: 2 470 mm, galia: 37 kW (50,31 AG), įėjimo įtampa: 380 V, įvesties srovės tipas: trifazis, darbinis ilgis: 3 050 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, Blechbiegemaschine FACCIN – 4-Walzen-Hydraulik 3000 x 40 mm Modell: 4HCI3-35/30 Baujahr: 1990 Plattenbiegemaschine mit Linearführungen und doppelter Vorbiegung (Double Pinch) Die Maschine befindet sich in gutem Arbeitszustand. Biegeleistung: - Blechbreite: 3.000 mm - Blechstärke rundbiegen: 40 mm - Vorbiegung: 35 mm Walzenabmessungen: - Nutzlänge: 3.050 mm - Zentrale Ober-/Unterwalze: 470 mm Durchmesser - Seitenwalzen links/rechts: 420 mm Durchmesser • Gehärtete Oberflächen aller 4 Walzen für hohe Festigkeit • 3 Walzen angetrieben über Getriebe mit Hydraulikmotor • Konische Biegevorrichtung: Seitenwalzen kippbar zur Formung von Konen, mit Gegenlagerwalze • Hydraulischer Stirnseitenabwurf zum Entladen der geschlossenen Schale • Stufenlos regelbare Drehzahl der Arbeitswalzen (hydraulisch, schnell/langsam) • Elektrisches Bedienpult auf Fahrgestell mit zentralen Steuerungen, Joysticks und 3 Digitalanzeigen • Digitale Positionsanzeigen der Walzen für Wiederholgenauigkeit beim Biegen und Vorbiegen • Hydrauliktank: 350 Liter Fassungsvermögen – Elektromotor: 37 kW – Betriebsspannung: 380 V / 50 Hz • Abmessungen: 7.700 x 2.410 x H 2.470 mm – Gewicht: 43.000 kg Hsdpfxowb Scmo Af Uel

Būklė: naudotas, Gamybos metai: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8-100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450x280 mm Ram adjustment: 63 mm Hsdpfx Aocxxx Hef Usl Strokes per minute: 140 Total power requirement: 7 kW Machine weight approx.: 3.5 t

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min TILTING AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400 x 400 mm - Number of pallets: 2 - Max. pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY Hsdpsuhbv Sofx Af Uel - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Space requirement: 4,100 x 2,300 mm - Machine height: 2,720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Direct measuring systems - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin wash - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe - Workpiece measuring probe: Renishaw OMP60

Būklė: naudotas, Technical Details: Spindle diameter: 130 mm Hsdpfx Afsvr S Ule Ujl Drilling depth: 1,380 mm X-travel: 2,500 mm Y-travel: 1,600 mm Z-travel: 380 mm W-axis: 900 mm spindle feed U-axis: 320 mm facing slide feed Control system: on request Tool holder: ISO SK50 Speed – facing slide: 4.5–180 rpm Drive spindle speed: 4.5–900 rpm Feed – x/y: 5–2,000 Total power requirement: approx. 40 kW Machine weight approx.: < 35 t plus auxiliary equipment The machine can be offered in four different sales options. Please choose! 1. The machine is in as-new mechanical condition, as it stands. 2. The machine as it stands, including plate table 4,000 x 2,000 x 300 mm = Stock No. 1101081 3. The machine rewired, with new control cabinet, digital readout, 4-axis, Siemens AC drives, Siemens axis motors (50A/31Nm) with 12 month warranty on all new parts. 4. Additional accessories can also be optionally offered, e.g. coolant system, chip conveyor, enclosure, etc. Please contact us to discuss these options.

Būklė: naudotas, Manufacturer: CINCINNATI Hedpfswrpyksx Af Ujl

Būklė: naudotas, Gamybos metai: 1983, Technical details: Pressure: 160 t Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through opening in table: 4x Ø 62 mm Hedsu Nfvuspfx Af Uel Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter i.e. *

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: Hjdpfjt Hw N Hex Af Ujl • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice