Pirštų sujungimo linija

DIMTER HK 800 K/S/N

Būklė: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim Cjdew Sy T Hepfx Aahsgp

Gamybos metai: 2003, būklė: naudotas, Bollegraf kūjinis malūnas AS 75/850 Pagaminimo metai: 2003 Galia: Csdpfx Asg T Id Noahsgp Pritaikymas: Įvado skerspjūvis: Rotorius- Rotoriaus plotis: 850 mm Kaina: 24.500 eurų Kontaktinis asmuo: ponas Rainer Eckerle

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger-jointing press, foldable - Drying paternoster approx. 7 m, for board lengths up to 6 m - Cut-off and zero saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine not for sale - Package cross conveyor The machine is in very good condition, with very few operating hours. Cgjdewclkyspfx Aahop Machine is still assembled, but available immediately.

Būklė: naudotas, Gamybos metai: 2002, veikimo valandos: 37 000 h, mašinos/transporto priemonės numeris: 1651, rankos pasiekiamumas: 15 200 mm, keliamoji galia: 1 900 kg, vėžės plotis: 3 000 mm, Įranga: kabina, kranas, Year of manufacture: 2002 Machine number: 1651 Track width, m: 3.0 Crane type: OBX II (year of manufacture 1997) Csdpfxjv Hwk Uo Aahegp Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.0 m Grab: included Crane position: behind the cab Cab position: center !! Sale on behalf of a customer !!

Būklė: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 94323, X ašies eiga: 3 060 mm, Y ašies eiga: 1 260 mm, Z ašies eigos atstumas: 150 mm, bendras aukštis: 2 400 mm, bendras ilgis: 4 400 mm, bendras plotis: 2 800 mm, bendras svoris: 3 130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC Machining Center Fully operational, available for inspection in Wadowice. X-axis travel: 3060 mm Y-axis travel: 1260 mm Cjdpfxewpthts Aahjgp Z-axis travel: 150 mm CNC control type: XP 600

Būklė: naudotas, Gamybos metai: 2010, Chalet Construction Machine Used, good condition, low operating hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Cjdpfx Ajvwfqqeahjgp Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, mašinos/transporto priemonės numeris: 1277/8-71, Funkcionalumas: visiškai funkcionalus, Connected load 380V 7A Cutting length 4300 mm Cutting height 1925 mm Frame height 2210 mm Machine height 2500 mm Room height 2540 mm Edging height 1870 mm Pass-through height 1940 mm Cedpfx Aash U Sqrohegp

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 637 h, Funkcionalumas: visiškai funkcionalus, Karbidinė apvalių pjūklų galąstuvas nuo 80 iki 840 mm; kaip naujas, tik 637 darbo valandos; galimas vienalaikis galinės ir priekinės abrazyvinės galandimo galvutės montavimas; galanda bet kokio tipo dantis; rūko ištraukimas; galimas mokymas ir pristatymas. Codpoyi Akcjfx Aahjgp

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus,

Būklė: labai geros būklės (naudotas), Storti RM 500 Edger - Italian manufacture - Year of manufacture: 1993 - Electrically adjustable saw blade spacing Cgodpfok Talpsx Aahsp TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum workpiece width: 600 mm - Minimum material length: 800 mm - Maximum blade diameter: 600 mm - Spindle diameter: 40 mm - Two upper feed rolls - One upper pressure roll - Feed roll motor power: 2 x 1.1 kW - Feed rolls with automatic pressure adjustment - Seven lower driven toothed rollers - Electric adjustment of saw blades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive roller diameter: 100 mm - Feed drive motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3500 kg