Variklinis ilgio ribotuvas

Diethei PD 100e für schwere Lasten

Būklė: naujas, Load capacity 500 kg Number of suction pads 6 Diameter of suction pads 215 mm Vacuum Lifter VH 6-500 for horizontal transport of smooth, dry, and airtight panels. Robust load-bearing construction made of steel, painted in RAL 2000 with low dead weight. Comprising: - 1x Galvanized longitudinal beam with a length of 2,400 mm - 3x Galvanized cross beams with a length of 1,000 mm each - 6x Spring-loaded, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the seal can be replaced separately from the metal carrier, cost-effectively and without tools - 6x Ball valves to shut off individual suction cups, allowing for the lifting of smaller panels without having to move cups or beams - 1x Spiral connection cable, small coil: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling * routed alongside the load chain to the lifting device Kjdoq Sc Aujpfx Aldjdn - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control panel (necessary if the vacuum lifter is powered via the crane’s trolley and there is no neutral conductor) - Operating handle extendable to 1,000 mm from the center of the beam. Stable metal pocket for your crane control unit included at no extra charge. - Operation "Suction / Release" via manual slide valve: The wear-free and very robust manual slide valve ensures safe suction and release upon activation of the release button. (Double release according to EN 13155) - Control and safety devices for the vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning system with acoustic signal annunciator * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-action release for unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easy-to-understand documentation Warranty against material and manufacturing defects for one year in single-shift operation (excluding wear parts). Initial inspection UVV 18, VBG 9a with CE certificate of conformity according to EN 13155 - Packaging suitable for truck transport.

Būklė: geras (naudotas), Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle Kdsdpfx Alsh Nvyzedsn - Tilting range: -3° to 45° - Drive: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her with 3 rollers - Useful spindle length: 100 mm - Spindle diameter: Ø 30 mm - Max. cutter diameter: Ø 220 mm - Dimensions: 1540/1100/H1520 mm - Weight: 962 kg

Būklė: naudotas, WIG Suvirinimo aparatas MESSER GRIESHEIM, modelis Combitig GW 23 AC/DC Prietaisas veikia tik su nuolatine srove ir kontaktiniu uždegimu Gamintojo Nr. 445276 Pagaminimo metai apie 1990 Galia: 230 A = 35 % darbo ciklas 180 A = 60 % darbo ciklas Kdsdpfxedzqa Ij Aldsn 140 A = 100 % darbo ciklas Reguliavimas – tolygus Srovės tipas – DC Maitinimas – 400 V, 50 Hz, 32 A kištukas - 2 taktų / 4 taktų suvirinimo funkcija - Veikia nuolatine srove su kontaktiniu uždegimu - Neveikia kintamosios srovės suvirinimas ir aukšto dažnio uždegimas - 7 metrų degiklio žarna su WIG rankiniu degikliu - Jungtis nuotoliniam potenciometrui (pėdų pedalui) – be pėdų pedalo - Oro aušinamas - Dujų slėgio reduktorius Matmenys (I x P x A): 850 x 480 x 600 mm Svoris: apie 90 kg Suvirinimo testas parodė gerus rezultatus suvirinant nerūdijantį plieną naudojant nuolatinę srovę, HF uždegimas neveikia, lankas uždegamas trumpu kontaktu. Aliuminio suvirinant kintamąja srove lankas nesusidaro.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, x-axis travel: 4216.0 mm y-axis travel: 2007.0 mm z-axis travel: 305.0 mm Control: CNC Table size: 4902.0 x 2134.0 mm Max. workpiece weight: 1465 kg / m² Machine weight: approx. 2500 kg Total power requirement: 30 kW Space requirement: approx. 5486.0 x 3708.0 mm Kdjdpfx Aeyclvnjldsn The compact bridge-style waterjet cutting machine consists of a torsion-resistant steel construction with a special long-lasting anti-corrosion coating. Both X-axes, as well as the particularly elevated Y-axis, are based on the maintenance-free Intelli-TRAX drive system developed by OMAX specifically for the unique demands of a waterjet cutting machine. Equipment features: - Motorized Z-axis - Water level regulation - Abrasive system with AFS 1000 abrasive delivery system - High-pressure system featuring special stainless steel high-pressure pipes - MAXIEM direct-drive pump M4050 - OMAX PC control software Intelli-MAX for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the 5-axis A-Jet tilt cutting head - Height sensor for 5-axis A-Jet cutting head - Laser pointer for positioning assistance - Automatic sludge removal system MBM ASAS-ME - Compressed air injection for the automatic sludge removal system MBM ASAS-ME - Clamp and fastening set for sheet material and material holders - Catchment grating in the cutting tank - Sensors for automatic monitoring of the cutting process - Water treatment via water conditioning, including water analysis - Omni-Start (Vacuum Assist) drilling aid for brittle and laminated materials

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Kedeu R Szaepfx Aldedn Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Būklė: naujas, Gamybos metai: 2025, pjūklo disko skersmuo: 400 mm, – 400 mm pjūklo diskas – Dviguba įstrižainė – 2 pneumatiniai spaustuvai Kdodpsgg N Drjfx Aldjn – Rūko tepimo sistema – Pūstuvo pistoletas – Apsauginis dangtis – Dokumentacija – 400 V

Būklė: naujas, Gamybos metai: 2026, No matter what job you need to cut, the A700 is the only saw you'll ever need. With the largest cutting capacity in its class and an extensive ±75º mitre angle range, the A700 is engineered for high-precision, high-angle mitre cuts—without limiting the profile sizes you need to process. This saw is ideal for bundle-cutting multiple aluminium profiles simultaneously, delivering exceptional accuracy. Enjoy high-speed aluminium processing with precise PLC-controlled movements. The pneumatically actuated safety guard opens and closes at the press of a button, granting full, unobstructed access to the saw table. An integrated safety switch disables operation whenever the guard is lifted, ensuring maximum workplace safety. Optional CNC-controlled saw mitre angle positioning is available, complete with intuitive touch-screen controls. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety compliance, two-hand operation for cutting • Overhead safety guard with 900 mm safety tunnels on each side • Guard lifts pneumatically at the push of a button • Safety switch disables saw operation if guard is raised • 2× vertical clamps and optional 2× horizontal clamps with adjustable pressure settings • Mitre angle adjustment ±75°, positive stops at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior workspace lighting • 2 × Ø100 mm chip extraction outlets Kdodpfxomb U Tuj Alden • Optional 2.2 kW dust extraction unit • Optional automated mitre control system Ideal for: • Mass aluminium fabrication • Mitered aluminium structure production • Window and door manufacturing • Blinds, shades and furniture production • Engineered aluminium assemblies • Aluminium façade construction

Būklė: naujas, The Jantar is the most popular model among Eckert machines due to its dynamics and efficiency. It is used by large industrial companies as well as medium-sized enterprises seeking an economical and reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems and can be supplemented with extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s design has been optimized over the years for maximum reliability, as confirmed by hundreds of customers across Europe. Main features • Attractive price for a well-equipped base version • High-dynamic and precise cutting for 2D applications, pipes, and profiles • Cutting capacity from 0.5 mm up to 100 mm material thickness • Extensive database with predefined cutting parameters • Optional extension of the working area length Kdjdef Alb Aspfx Alden Technical data Drive: Servo AC Available working widths: 1,500, 2,000, 2,500, 3,000 mm Available working lengths: Any length from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 100 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Repeatability: DIN-EN 28206 Electrical systems: DIN-EN 81346 Safety module: DIN-EN 13850 Working height: 740–760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Būklė: dilaminuotas dirbtuvėje (naudotas), Roboterschweißanlage mit 2 m Zweistationen-Wender Zum Verkauf steht eine Roboterschweißanlage der Marke Yaskawa Motoman inkl. RM2-250 Wender Sicherheitstechnik Kedpod Tfb Nefx Aldedn Roboter UP20 XRC Düsenreiniger usw. Die Anlage kann durch uns montiert und in Betrieb genommen werden. Eine Einweisung bzw. Schulung ist ebenfalls möglich. Die Anlage wird je nach Kundenwunsch überholt und aufbereitet. Wir sind zertifizierter YASKAWA Systempartner und bieten Ihnen umfassenden Service für Ihren Motoman-Roboter und Ihre Anlagen.

Būklė: naujas, pjūklo disko skersmuo: 550 mm, suslėgto oro jungtis: 7 juosta, Įranga: dokumentacija / vadovas, - Saw blade 550 mm - Double mitre Ksdpfxorh Dkyj Aldsdn - 4 pneumatic clamps - Hydrocheck system - Misting lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cover - Documentation - 400V