Transporterio juosta + juostinis magnetinis separatorius

die magnetprofis

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminium angled conveyor belt including mobile base frame Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at each bend: 40 degrees Feed height (measured from floor): 500 mm Ihodpfx Ageyt Ia Defjw Discharge height: 1,600 mm Conveyor belt width: 700 mm Extremely robust aluminium construction, heavy-duty design! PU conveyor belt including flights and corrugated sidewalls Drive: 0.55 kW motor (customizable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, IP54 protection rating Drive and other components ready for connection, motor control unit optional Corrugated edges: 80x50 mm T-60 cleats, short pitch 2-ply, exceptionally cross-stable Corrugated sidewalls, flights, and belt are continuously high-frequency welded In the angled section, the belt is guided on both sides with 4 hold-down rollers each. The belt is manufactured with a 100 mm zone on each side free from sidewalls. Due to the corrugated sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width: 400 mm, calculated as follows: (Top view) Cross-section arrangement 100+50+400+50+100 mm Demonstration unit - Immediately available! - Can be viewed under power All prices are net prices plus 19% VAT All information subject to change, while stocks last!

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: ribota funkcionalumas, Gamybos metai: 2003, veikimo valandos: 24 000 h, Vamzdžio skersmuo (maks.): 100 mm, Vamzdžio ilgis (maks.): 4 100 mm, Lenkimo kampas (maks.): 183 °, lenkimo spindulys (maks.): 300 mm, sienelės storis: 8 mm, Transfluid DB 2090 DB CNC Dornbiegemaschine für Rohre. Exzellente, hochwertige deutsche Maschine, mit komplett überholten Haupt-Hydraulikpumpen und einem komplett generalüberholten Hauptbiegekopf. Es muss lediglich ein neuer Encoder installiert werden und die Maschine ist sofort einsatzbereit. Ausstattungsmerkmale: Iedjtrd T Tepfx Agfehw - Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D - Vorauseilender Dornrückzug - Vollautomatische Einrichtung von Spann- und Nachschubklemmungen - Verstärkter Nachschub für das Biegen von dünnwandigen Rohren mit engem Radius - Langes Maschinenbett mit 4000 mm über Dorn - Umfangreiches Werkzeugsortiment im Wert von über 150.000 AUD ist im Lieferumfang enthalten. Enthaltene Werkzeuge: * 101,6 mm | 152 mm Biegeradius (CLR) * 101,6 mm | 200 mm CLR * 76,2 mm | 114 mm CLR * 76,2 mm | 200 mm CLR * 76,2 mm | 238 mm CLR * 63,5 mm | 96 mm CLR * 57,2 mm | 86 mm CLR * 50,8 mm | 76 mm CLR * 44,5 mm | 67 mm CLR * 40 x 40 mm | 120 mm CLR * 50 x 50 mm | 150 mm CLR * 60,3 mm | 150 mm CLR * 48,3 mm | 120 mm CLR

Gamybos metai: 2025, veikimo valandos: 5 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2025112701, Aluminum Inclined Conveyor with Supporting Frame Including adjustable leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm Ijdpfx Ageydb Rwjfshw - Inclined section: 3,000 mm - Discharge height: 2,000 mm Execution: Aluminum structural design - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet, 2.0 mm galvanized Drive drum and return drum made of S235 steel, welded and machined Ø150 x 620 mm, crowned and precision-turned, shaft secured with pillow block bearings. Drive: Shaft-mounted gear motor, 1.10 kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless, high-frequency welded with stepped splice Belt material: 2-ply, specially cross-stabilized 2 pcs. wave edge profiles, 80 mm high, 50 mm wide, edge-aligned and high-frequency welded 18 pcs. T60 cleats, 430 mm long, approx. 508 mm pitch, center-welded Belt material: 2-ply, specially cross-stabilized Due to wave edge profiles on both sides, the usable belt width is reduced: Usable width: 500 mm, as follows: (Top view) Cross arrangement 50+500+50 mm

Būklė: naujas, Gamybos metai: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Wave Edge Profiles) We offer a robust incline conveyor constructed from aluminum profiles for reliable transport of unit and bulk materials—ideal for industrial, manufacturing, recycling, woodworking, and more. Cleats and wave edge profiles ensure secure material handling even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Feed height: individually adjustable ✔ Incline section: custom lengths available ✔ Discharge height: individually adjustable ✔ Substructure includes leveling and machine feet, or transport castors → for easy leveling on uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum frame construction ✔ Twin profile 90x45mm or reinforced triple profile 135×45mm ✔ Full-surface discharge plate 2.0 mm galvanized or 1.4301 stainless steel _____ Rollers / Drive: ✔ Drive and return rollers made from S235 steel, welded and machined ✔ Ø100, 150 or 220mm ✔ Shafts mounted with pillow block bearings ✔ Drive: Shaft-mounted gear motor 0.18 – 3.0kW ✔ Belt speed: individually adjustable ✔ Power connection 230/400V, 50Hz, protection class IP54 (standard) Ijdpfx Agoyhzplefehw ✔ Drive pre-wired to motor terminal box ➡️ Commissioning must be performed by qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt width: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply versions with high cross-stability ✔ Wave edges: up to 80mm high ✔ Cleats: individually customizable ✔ Pitch customizable as required _____ Optional Accessories: ✔ Infeed plates ✔ Hopper / infeed hopper ✔ Storage bunker / loading bunker ✔ Discharge hopper ✔ Custom lengths / widths ✔ Cleats & wave edges to specification _____ ✔ Custom fabrication to customer specifications ✔ Industrial quality "Made in Germany" Dimensions, configuration & pricing upon request Just send us a short message – we provide fast and straightforward advice. Discover tailor-made solutions for your industry! As an innovative engineering company, we are proud to offer custom solutions for the recycling, food processing, and related industries. Our extensive product portfolio covers everything from conveyor systems, flat conveyors, incline conveyors, and angle conveyors to Z-conveyors. We also produce feed hoppers, magnetic separators, overband magnets, drum magnet separators, and dosing bunkers—each tailored to the specific requirements of our clients. We understand that every sector and project is unique. That’s why we adapt our solutions individually to your needs and requirements. Complex projects represent an exciting challenge, and we look forward to developing innovative solutions together with you. For us, there are no special orders—there is a fitting solution for every challenge! Put us to the test! Contact us and discover how we can turn your requirements into bespoke solutions. Let’s shape the future of your production processes together!

Gamybos metai: 2018, būklė: naujas, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400 mm Ihjdpfx Agod Dy S Dofow ===== 4x lifting eye bolts for suspension Rubber belt GB30 Magnet dimensions: 1200 x 500 mm

Gamybos metai: 2026, būklė: naujas, Robust steel construction – designed for continuous operation The basic structure consists of a sturdy structural steel frame, manufactured from laser-cut, folded, and welded components. The surface features a high-quality powder coating in RAL0208. Modular design: Our conveyor belt frames are available as transportable segments. This makes the system: • Easy to transport and assemble • Extendable or shortened at any time • Ideally suited for future modifications or plant adaptations Conveyor technology & carrier rollers The carrier roller assembly in the lower frame is designed for smooth and reliable operation: • Axle diameter: 60/15 mm • Roller station spacing: approx. 500 mm (can be customized) • Infeed area with optional closer roller spacing for increased load capacity Drive & rollers The drive roller and return roller are made from S235 steel, welded and precisely machined: • Diameter 220 × 700 mm, crowned finish • Shaft fixed with plummer block bearings • Bearing points with robust UCF flange bearings incl. grease nipples Drive unit: • Hydromec worm geared motor 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 Ihjdeyhznnspfx Agfjw • Drive ready for connection up to motor terminal box • (Commissioning must be performed by a qualified electrician) • Motor mounted on right side in conveying direction, pull installation Conveyor belt A durable, industrial grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Splice area without profile • Endless hot vulcanized Individual options & accessories (as required) Thanks to the modular design, all components can be precisely configured to your process, for example: ✅ Special lengths & widths ✅ Side panels / corrugated edges (for lateral guidance and greater conveying stability) ✅ Infeed plates / loading plates (wear-optimized, gentle on material) ✅ Loading/reception hoppers (for clean feeding of bulk materials) ✅ Discharge plates / chutes ✅ Cleated profiles / alternative belt qualities ✅ Adjustable roller spacing & carrier roller geometry ✅ Special paintwork / customer-specific execution

Gamybos metai: 2026, būklė: naujas, DM Flat Conveyor Belt Type FB-700 without substructure for conveying bulk materials Conveyor belt length: 6,000 mm Belt width: 650 mm Construction made of structural steel, laser-cut, bent, and welded Base structure powder-coated RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame construction can be extended or shortened at any time. Carrier roller system in the lower run, axle Ø60/15 mm Roller station spacing approx. 500 mm (customizable) Closer roller spacing in loading area Drive roller + return roller made of S235 steel, welded and machined Ø220x700 mm crowned, shaft mounted with tension bearings. Ihsdoyhznhjpfx Agfew Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) Motor mounted on the right in conveying direction, installed in pull configuration. Bearing locations fitted with robust UCF flange bearings including grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile 17 mm high x 650 mm wide Joint area without profile, hot vulcanized endless splice

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, For optimal recovery of non-ferrous metals or material purification Ihsdpfovdqdisx Agfew This extremely powerful machine is mainly used for processing municipal waste, shredder materials, household appliances, wood, plastics, glass, IBA and bed ash, as well as electronic waste. This IMRO non-ferrous metal separator meets the highest requirements for recovery rates and purity levels.

Būklė: naujas, Gamybos metai: 2026, Aluminum-angle conveyor belt with supporting frame including adjustable feet and machine leveling feet to compensate for uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Bend angle: 45° Height of horizontal section: 350 mm Ijdoyhzhzopfx Agfohw Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Construction: Aluminum structural design - Double reinforced profile 90x45 mm - Full-surface 2.0 mm zinc-plated discharge plate Drive roller and return roller made of S235 steel, welded and machined Diameter 100x620 mm, crowned and precision-turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted geared motor 1.10 kW, belt speed: 0.53 m/sec Connection 230/400V, 50Hz, protection rating IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including PU wavy edge, petrol matt Belt width: 600 mm 2 pcs. corrugated edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch Belt material: 2-ply, especially cross-stable In the bend area, the belt is guided on each side by 3 hold-down rollers. The belt features a 70 mm edge-free zone on both sides. Due to the double wave edge, the usable belt width is reduced: Usable width: 300 mm, determined as follows: (Top view) transverse arrangement 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC V-guide profile – 10x6 mm on the running surface - Incl. widened base frame for improved stability (top-heaviness) - Incl. cutout in the discharge plate - Incl. wear strips in drive and return roller - Incl. non-magnetic zone for over-belt magnetic separator - Incl. bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our comprehensive product portfolio includes everything from conveying systems, flat belt conveyors, inclined conveyors, and angle conveyors up to Z-conveyors. We also manufacture feeding hoppers, magnetic separators, over-belt magnet separators, drum magnet separators, and dosing bunkers – all built to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we adapt our solutions individually to your needs and specifications. Complex projects represent an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there are no special configurations – for every problem, we find the right solution! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, over-belt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, over-belt magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnet, metal separator, block magnet, filter systems, dosing bunker, feed hopper, filling systems

Būklė: naujas, Gamybos metai: 2026, Aluminum Angled Conveyor Belt with Substructure Including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Bend angle: 45° Total conveyor belt length (measured on the ground): 5,000 mm Discharge height: 2,000 mm Height of the horizontal section: 500 mm Design features: - Aluminum modular construction - Reinforced triple profile 135x45 mm - Continuous 2.0 mm galvanized steel cover plate Drive roller and return roller: S235 steel, welded and machined Ø150 x 820 mm cambered, shaft fixed with bearing units. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive delivered ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PVC Conveyor Belt DM 15/4 0+007 PVC including wave edge profiles, green Belt width: 800 mm 2 wave edge profiles (80 mm high, 50 mm wide), high-frequency welded 32 T-50 cleats, approx. 355 mm pitch Belt material: 2-ply, especially cross-stable Ihedpfx Asyhzhusgfew At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt is designed with a 70 mm edge-free zone on both sides. Due to the wave edge profiles on both sides, the effective belt width is reduced: Usable width: 490 mm, composed as follows: (Top view) Crosswise layout: 100+50+5+490+5+50+100 mm Discover custom solutions tailored to your industry! As an innovative mechanical engineering company, we take pride in offering custom solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. We also manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all tailored to our customers’ specific requirements. We understand that every industry and every project is unique. That’s why we customize our solutions individually to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. For us, there is no such thing as a special order—we find the right solution for every challenge! Challenge us! Contact us to discover how we can turn your requirements into made-to-measure solutions. Together, let’s shape the future of your production processes! Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, conveyor belt magnet separator, lifting magnets, filter rods, magnetic grid, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems.

Būklė: naujas, Gamybos metai: 2024, ♻ Universalus pritaikymas (mediena, padėklai, įskaitant vinis ir smeiges, medienos plaušo plokštės ir likučiai, fanera, MDF plokštės, plastikas ir kt.) ✔ Variklio galia: 18,5 kW ✔ Rotoriaus ilgis: 870 mm ✔ Rotoriaus skersmuo: 270 mm Ihedpfjhzlr Ijx Agfjw ✔ Rotoriaus apsisukimų dažnis: 80–120 aps./min ✔ Pjaustymo peilių skaičius: 2x19 ✔ Granuliavimo dydis: 10–50 mm ✔ Našumas: iki 7 m³/val.* ✔ Nusiurbimo jungtis: 200 mm ✔ Užpildymo anga: 1446 x 1565 mm ✔ Matmenys (I/P/A): 2,15/1,97/2,04 m ✔ Svoris: 2050 kg 2 metų garantija arba 2000 darbo valandų

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Aluminum Z-shaped conveyor belt with supporting structure Including adjustable feet and freely swiveling transport castors with locking brakes Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor belt length (measured on the floor): 3,500 mm Height of horizontal section: 400 mm Design: Aluminum construction - Double-reinforced profile 90x45 mm - Full-surface discharge sheet, 2.0 mm galvanized Drive and deflection drum: S235 steel, welded and machined Ø100x720 mm, crowned, shaft mounted with pillow block bearings Drive: Mounted geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready-wired up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS extra cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats centrally positioned, 430 mm long, spaced approx. 299 mm apart Belt material: 2-ply, especially cross-stable At the bends, the belt is guided on both sides by 3 hold-down rollers each. The belt is manufactured with a 70 mm border-free zone on both sides. Due to the wave edges on both sides, the usable width of the conveyor belt is reduced: Ihsdpfx Agjyhzhnofew Usable width: 500 mm, calculated as follows: (top view) transverse configuration 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on running surface profile - 10x6 mm - Including recess in the discharge sheet - Including sliding bushes in the drive and deflection drums

Būklė: naujas, Gamybos metai: 2026, Aluminum incline conveyor with substructure including adjustable feet and machine leveling feet for compensation of uneven surfaces - Feed height: 500 mm - Inclined section: 2,000 mm Ijdpsyhzhbsfx Agfshw - Discharge height: 1,200 mm Design: Aluminum construction - Triple-reinforced profile 135x45 mm - Full-area discharge plate 2.0 mm galvanized Drive drum + return drum S235 steel, welded and machined Ø150x620 mm, crowned, shaft mounted with pillow block bearings. Drive: Shaft-mounted geared motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired up to motor terminal box (Commissioning must be performed by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless, high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs. corrugated sidewalls, 80 mm high, 50 mm wide, high-frequency welded flush to belt edges 14 pcs. T60 cleats, 400 mm long, spacing approx. 296 mm, centrally welded Belt material: 2-ply, especially cross-stable Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width 500 mm, as follows: (top view) Transversal arrangement 50+500+50 mm

Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), Two complete injection molding production lines, each featuring a Husky injection molding machine, five complete toolsets with metal separators, a Motan gravimetric blending system, and crane system, are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Overall plant dimensions (LxWxH): approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color blending units, and T-conveyor belt. Documentation available. On-site inspection possible. Ihodpfx Aew Az Risgfew

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We cordially invite you to visit our technical center to experience the quality and functionality firsthand. Material Shredder 45 kW Ihedpfxsv Tdq Is Agfsw Hopper Opening: 1,030 x 1,235 mm Rotor Diameter: 360 mm Star-delta start, automatic shut-off in idle mode - Hydraulic pusher equipped with pressure plates - Siemens PLC control system - Optional: control cabinet extension for discharge conveyor belt + overband magnetic separator Complete solutions with discharge conveyors in any configuration. Our core competence is providing customers with exactly what they truly need. We work closely with our clients to develop customized, application-specific solutions and deliver suitable systems from our own production. Feel free to contact us by phone to find the ideal solution for your application. Conveyor belt, conveyor systems, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separators, block magnets, filter systems All prices are net, plus 19% VAT. All information subject to change, offer valid while stocks last!