Chopper

DHB-Maschinenbau 800

Būklė: geras (naudotas), Gamybos metai: 2020, Rotor diameter: 260 mm Gsdpfx Apswzaizs Ijiu Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor: 18.5 kW Technical data available on request Required space approx. 2050 x 1550 mm All information without guarantee

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to a maximum of 10 pallets per hour *Screen and material dependent. Significantly higher throughput for smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulic system - Automatic shut-off when rotor runs idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Godpfxsx Af Rde Ap Isiu The following options are available at extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (Start and stop in sync with the shredder) - Enlarged hopper 1500x1500 mm + €3,480 net Requirements for input material: - Moisture content (atro) must be below 25% - Material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Gijdpfoqt Dmyex Ap Isu Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional Gsdpfxou Agh Se Ap Ioiu To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Gamybos metai: 2006, būklė: beveik kaip naujas (naudotas), Pneumatic tipper and leveler for band saws. Gsdedy A A Nspfx Ap Ieiu

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Naudota mašina iš veiklos nutraukimo. GROSS smulkintuvas - Modelis GAZ 62 - Pagaminimo metai: 2012 - 18,5 kW - Gera būklė - Prieinama iš karto Gijdpox Tp U Rsfx Ap Ieu

Būklė: naudotas, Gamybos metai: 2019, MAKSIMALUS SMULKINIMO SKERSMUO 250 MM VARIKLIO GALIA 75 kW SMULKINTUVO BŪGNO PLOTIS 640 MM SMULKINTUVO VOLELIO SKERSMUO 660 MM VIRŠUTINIO VOLELIO PLOTIS 640 MM MAKSIMALI VIRŠUTINIO VOLELIO ANGA 600 MM PEILIŲ KIEKIS ANT MAŠINOS: 3 PADAVIMO VOLELIAI: 2 Gsdeyffi Topfx Ap Ijiu

Būklė: geras (naudotas), Gamybos metai: 2006, Drum chipper, high-speed model with horizontal feed max. infeed width: 450 mm max. infeed height: 140 mm Giodpfju Rl Rusx Ap Iju Motor: 75 kW with frequency converter for variable speed no vibratory chute included

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2012, veikimo valandos: 21 000 h, Funkcionalumas: visiškai funkcionalus, paskutinio kapitalinio remonto metai: 2024, apsaugos tipas (IP kodas): IP54, Briiketavimo presas RUF 400 PILNA BRIKETAVIMO LINIJA PASIŪLYMUI PIRKTI: Būgninė pjuvenų džiovyklė Padavimo sraigtinis konvejeris Juostinis konvejeris – 2 vnt. Separatorius su talpa Sraigtinis konvejeris – 6 vnt. Šlapios pjuvenos sandėliavimo talpa Kuro saugojimo talpa Godpfx Apjxu Ryuo Ijiu Medienos atliekų katilas Medienos atliekų smulkintuvas Ištraukimo ventiliatorius su ciklonu Pakavimo mašina su kompresoriumi Papildomos nuotraukos ir informacija prieinami rimtiems interesantams.

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Kompaktiška EDGETEQ serijos briaunų laminavimo mašina, skirta mažoms meistrų dirbtuvėms, su galimybe automatizuoti agregatus. Pagrindinė komplektacija (2020): Valdymas easyTouch Sujungimo frezavimo agregatas Klijų užnešimo agregatas + 1 atsarginė klijų talpa Pjovimo pjūklas, dvigubas variklis, pneumat. reguliuojamas Frezavimo agregatas su rankiniu reguliavimu ties lygiais, pluoštiniais, radiusiniais kampais Forminis frezavimo/briaučių apvalinimo agregatas Profilio gremžtukas, pneumat. reguliuojamas Plokštuminis gremžtukas Poliravimo agregatas Techniniai duomenys (2020): Mašinos ilgis [mm]: 4.153 Ruoninuko plotis Ruoninuko storis 8 - 22 [mm]: 70 Ruoninuko storis 23 - 50 [mm]: 120 Ruoninuko storis 41 - 60 [mm]: 150 Giodow Tcpmspfx Ap Iju Ruoninuko storis [mm]: 8 - 50 (opcija 8 - 60) Briaunos storis [mm]: 0,4 - 3 Padavimo greitis [m/min]: 11