Kranų sistema

DEMAG DC-COM 1/1 H5

Sąlyga: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Svoris 4950 kg, bendras svoris 12000 kg Nkjdjwpmckopfx Agieu Galia 5,5 kW

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: GO 832 833, Demag ELKE overhead crane crane runway bridge crane indoor crane crane 2 units available!!! Load capacity / lifting capacity: 1.6 tons (1600 kg) Track gauge: 11,785 mm, external dimension approx. 12,000 mm Year of manufacture: 1997 with pendant control Lifting height: 3 m Overall height: from top edge of crane girder to bottom edge of hook approx. 900 mm End carriage length: approx. 200 cm Nkjdjum I Akspfx Agisu The crane is dismantled and available immediately. Matching power rails can also be supplied. Please inquire. Very good condition, inspection logbook is available. Column-mounted and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible – please provide postal code for quotation. Collection preferred.

Sąlyga: naudotas, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1,845 mm Table Length / Clamping Length: 5,505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot pitch: 263 mm Overall Length: 6,230 mm Njdpfx Agobn Amfjieku Total Plate Height: 350 mm Weight: 11 t

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Horizontalus transporteris URBAN - TBA26/38 HQR, parduodami 7 vnt. Galima parduoti ir atskirai. Nodpfetr Eqfjx Agijku

Sąlyga: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm Nksdpfx Aog Ezaregisu 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 5 277 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 762 mm, Y ašies eiga: 508 mm, Z ašies eigos atstumas: 508 mm, ruošinio svoris (maks.): 300 kg, stalo plotis: 500 mm, stalo ilgis: 630 mm, bendras svoris: 8 500 kg, veleno greitis (maks.): 15 000 aps./min, ašies variklio galia: 22 400 W, veleno nosis: CT 40, įrankių magazino lizdų skaičius: 40, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, CNC Bearbeitungszentrum HAAS UMC 750 SS TECHNISCHE DATEN: Baujahr: 2019 Anzahl synchron gesteuerter Achsen: 5 Verfahrweg X-Achse: 762 mm Verfahrweg Y-Achse: 508 mm Verfahrweg Z-Achse: 508 mm Drehbereich C-Achse: 360° Tischabmessungen: Ø630 x 500 mm Maximale Tischbelastung: 300 kg Nkjdox Nf Tbspfx Agisu Schwenkbereich B-Achse: +110° / 350° Spindeltyp: CT 40 Max. Spindeldrehzahl: 15.000 U/min Spindelleistung: 22,4 kW Werkzeugmagazin Plätze: 40 Schmiermitteltank Inhalt: 284 l Betriebsstunden: 5.277 h Gewicht: 8.500 kg IM LIEFERUMFANG ENTHALTEN: x1 Spindel 15.000 U/min x1 Innenkühlung durch die Spindel x1 Hochdruck-Kühlmittelpumpe 21 bar x1 Zusatz-Kühlmittelfilter x1 RENISHAW Funk-Messtaster für Werkstückvermessung x1 Kalibrierkugel x1 RENISHAW Werkzeugtaster x1 HAAS Ölnebelabscheider x1 HAAS Fernbedienung (Handrad) x1 HENNIG Späneförderer, Typ 101435 Die Maschine kann nach Terminvereinbarung unter Strom besichtigt werden. Preis auf Anfrage, Verladung auf LKW ist im Preis enthalten. Weltweiter Versand möglich. Die Angaben auf dieser Seite wurden nach bestem Wissen und Gewissen gemacht. Für deren Richtigkeit kann keine Gewähr übernommen werden. Vergleichbar mit Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, sowie Fräs-, Bohr- und Gewindeschneidmaschinen und CNC-Schleifmaschinen.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 550 mm, tekinimo skersmuo virš slankiojančio stalo: 1 550 mm, tekinimo skersmuo virš viršutinio vežimo: 1 220 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 600 mm, bendras aukštis: 1 600 mm, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance conditions of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: Overhaul on order, delivery time 3.5 months from order confirmation. Technical specifications: - Distance between centers/turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Overall weight: 14,100 kg Nksdov Ab Dqopfx Agiju Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes with display, including installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post - Full-length rear safety guard - Inverter including soft-start function and potentiometer for stepless speed control

Sąlyga: naudotas, Gamybos metai: 2010, Column-mounted slewing crane: mobile Jib length approx. 2,500 mm Machine weight approx. 4 t Load capacity 125 kg Bucket dead weight 430 kg Minimum bucket fill weight 416 kg Minimum total bucket weight 846 kg Max. wheel load 391 kg Max. support load 544 kg Nodpfx Asmt Rpwegieku Without documentation/papers.

Sąlyga: labai geros būklės (naudotas), Motor-driven NC rotary table Stepless rotary table (increment 0.001°) Integrated pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Overall height: 660 mm Centering bore: 100 H6 mm T-slots: 7 units Slot dimensions: 22 H7 mm Slot spacing: 160 mm Position measurement via ROD 250 rotary encoder. Nkodpsfk R Tdjfx Agiju Condition: Very good (used) Optional: with machine base (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, as well as CNC control upgrades. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system upgrades

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, įėjimo srovė: 238 A, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels Nkodpfx Agsvf E Avoiju - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.