Juostinio šlifavimo staklės

DelNegro AS 90

Būklė: naujas, Saw blade diameter: 370 mm Cutting range at 90 degrees, round: 120 mm Cutting range at 90 degrees, square: 100 mm Cutting range at 90 degrees, rectangular: 180x100 mm Working height: 925 mm Saw blade speed: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirements: approx. 1.9 x 1.45 x 2.1 m SPECIAL PROMOTIONAL PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20192) · Miter cutting left 60° / right 45° · Hydro-pneumatic control of saw unit · Electro-pneumatic material feed unit · Smooth-running, high-torque worm drive with large g ear reduction, integrated into a rigid cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, also with lateral quick adjustment for miter angle changes · Precision prismatic guide for the drive head, adjustable on the side Ksdpfed Iin Hsx Adlslw · Especially robust machine base with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time, etc. · Adjustable water cooling · Adjustable cutting pressure NOTE: Price does not include saw blade! (Saw blade price: €204)

Būklė: geras (naudotas), Gamybos metai: 2008, Sawing capacity round: 115 mm Max. saw blade diameter: 350 mm Sawing capacity rectangular: 200 x 70 mm Sawing capacity square: 105 x 105 mm Sawing unit power: 6.5/8 kW Speed on sawing shaft: 1700/3400 rpm Maximum feed length: 9999 mm Shortest feed length: 10 mm Weight: 2300 kg Kodpfx Ajrz Rw Redlolw Equipment: - BEHRINGER PLC control - Micro lubrication system - Controlled zero edge - Cutting width extension - Machine light - Vertical main clamping - Non-return device - Extraction system prepared (Keller extraction unit not included in delivery) - Roller conveyor infeed, self-made, length approx. 5000 mm

Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), A coolable (insulated) milk tank from Fabdec is available. Volume: 10,000 L, length: approx. 3,000 mm, diameter: approx. 2,200 mm. The tank is equipped with an integrated agitator and a spray system for CIP cleaning. A refrigeration unit is not included. Klsdpet Hxdlsfx Adlew

Būklė: naudotas, Räummaschine Kjdpfx Adst Hr Dfolelw

Būklė: naudotas, kuro tipas: elektrinis, kuras: elektra, Spijkstaal transporto priemonė    • Visiškai elektrinė    • Įskaitant registracijos numerį    • Įskaitant akumuliatoriaus įkroviklį    • Didžiausias greitis 18 km/val    • Paruošta darbui Būklė: Naudota Kodpfx Aex S Np Ejdlelw

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), Max. bar diameter 65 mm Ksdpfxoin Hkme Adlolw Max. bar length 3000 mm

Būklė: naujas, Number of drawers: 6 pcs. Dimensions (L x W x H): 720 x 580 x 800 mm Net weight: 100 kg Load capacity: 100 kg per drawer Kledpfx Adsvblibelsw Robust tool cabinet with 6 lockable drawers. Drawer heights: 2 x 75 mm, 4 x 100 mm, 1 x 150 mm, and 1 x 200 mm Usable internal dimensions: 620 x 450 mm. Maximum load per drawer: 100 kg! Equipment: 32 x boxes, 75 x 75 mm 16 x boxes, 75 x 150 mm 8 x boxes, 150 x 150 mm 12 x long dividers 32 x short dividers 1 x stacking plate

Būklė: naudotas, Gamybos metai: 2005,

Būklė: naudotas, Sandėlio vieta: Nattheim Klsdpovvkrdofx Adlew

Būklė: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Klsdpfxst Hw D Rj Adlew Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.