Universalus apdirbimo centras

DECKEL FP4 M

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 500 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 50 aps./min, bendras ilgis: 800 mm, stalo plotis: 460 mm, stalo ilgis: 800 mm, įvesties srovės tipas: trifazis, sukimosi greitis (maks.): 2 500 aps./min, sukimosi greitis (min.): 50 aps./min, garantijos trukmė: 3 mėnesiai, Įranga: dokumentacija / vadovas, Siūlome šią generaliai suremontuotą Deckel FP4 M frezavimo staklę, pagamintą 1985 metais. Gamintojas: Deckel Modelis: FP4 M Metai: 1985 Būklė: generalinis remontas Valdymas: TNC113 aktyvioji valdymo sistema Hsdex Sllpepfx Af Ieng Papildomai: universalus stalas su tvirtinimo paviršiumi 800mm x 370mm Jeigu turite klausimų arba reikia išsamesnės informacijos, parašykite mums žinutę arba paskambinkite.

Sąlyga: naudotas, Gamybos metai: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop-inspected Machine No.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric inspection with test report Accessories: Hnodor En Dyjpfx Af Ieg - 3-axis active digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant unit - Centralized electrical lubrication system - Operating manual Used, as seen, without warranty The machine corresponds technically to the state of the art at the time of manufacture.

Sąlyga: naudotas, Gamybos metai: 1991,

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, plunksnos brūkšnys: 90 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 50 aps./min, Įranga: dokumentacija / vadovas, Dear Sir or Madam, We hereby offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. Thanks to its comprehensive equipment, this model is a true highlight among conventional machine tools. The Deckel FP4MK has been extensively partially overhauled in our workshop, leaving it in absolutely top condition and technically, visually, and geometrically almost indistinguishable from a new machine. We are looking forward to your inquiry! Delivery time: upon request Spindle speed: 50 – 2500 rpm Feed rate: 8 – 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table design: Fixed angle table or rotary-swivel tilting table Further features and accessories include: 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant unit, mounting feet, technical documentation, and much more upon request… Our service promise to you: - We are a certified master trades company in mechanical engineering Hnedpsx Irwdefx Af Isg - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul the selected machine for you - You are free to choose the machine’s paint color - Additional accessories such as tools can be ordered along with the machine upon request - If you wish, we can also install accessories such as safety devices, etc. - We are happy to handle shipping and/or installation for you

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), Loading chamber dimensions: 280x580 mm, loading height: 700 mm, maximum load: 300 kg, equipped with safety enclosure and documentation. The machine was operational until recently, but a complete maintenance service is required. Inspection is possible. Hodpsqgfbgsfx Af Ieng

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2203-7097 with warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout Hjdpelfc U Dsfx Af Ieng HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating manual Used, sold as seen The machine is technically in accordance with the standard of its year of manufacture.

Sąlyga: naudotas, Geldmacher MST / Deckel FP4M Milling Machine, Tool Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions / Size: Reference: approx. 2,500 × 2,700 × 2,100 mm (Length × Width × Height) Travel distances: X: approx. 500 mm Y: approx. 400 mm Z: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill stroke: Vertical quill: approx. 90 mm extension; additionally, the vertical milling head can be moved on the ram Spindle speed range: approx. 50 - 2,500 rpm Hjdpfx Afsxcldko Isng Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange a viewing. We can organise affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued. The prerequisite is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. Company names and trademarks mentioned are property of their respective owners and are used for identification and product description purposes only. Deviations from technical data as well as errors in the item description are possible and subject to change.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Universalus įrankinė frezavimo staklė Gamintojas: harich (DECKEL) Modelis: B (FP 2), bepakopė atnaujinta su CE geometrinis patikrinimas su bandymo protokolu su garantija Priedai: - 3 ašių skaitmeninė indikacija FAGOR Innova 30i-M - Fiksuotas stalas arba universalus stalas - Vertikalus frezavimo galvutė SK 40 - Centrinis rankinis tepimas - Aušinimo skysčio sistema - Naudojimo instrukcija CE ir saugos įranga: - Nauja staklių elektros instaliacija su valdymo spintele - Elektroniškai kontroliuojamas vertikalios frezavimo galvutės gaubtas - Tvirtinimo apsauga su elektrine apsauga - Pavaros variklis su stabdžiu - Valdymo pultas su avariniu stabdžiu, atrakinimo, paleidimo ir sustabdymo mygtukais, pašarų reguliavimo potenciometru - Nauja dokumentacija staklėms ir valdymo spintelei Hnodpfx Asvfdatef Ieg - CE atitikties deklaracija

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, special paint finish in Light Grey, CE compliant! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 >> Fixed angle table (newly scraped) >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on spindle carrier Hnjdpfx Afsxctyaj Isg >> Vertical and horizontal quill - ISO 40 taper >> Vertical quill extension: 90 mm >> Drawbar system: M16 >> Weight: approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication system About the Machine: Offered is a Universal Milling Machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, features minimal backlash, and all axes move smoothly and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes, all bellows have been replaced. The fixed angle table has been newly scraped. This is a reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout facilitates and further increases the precision of milling tasks. Take the opportunity to inspect and test the machine under power at our facility.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 500 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 2 500 aps./min, stalo ilgis: 790 mm, stalo plotis: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Hnjdpowffymjfx Af Isg Vertical travel 400 mm Spindle stroke 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 200 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 950 mm, stalo apkrova: 3 000 kg, ašies skersmuo: 100 mm, veleno greitis (maks.): 2 500 aps./min, bendras plotis: 1 000 mm, stalo ilgis: 1 120 mm, W ašies eiga: 710 mm, quill skersmuo: 100 mm, paskutinio kapitalinio remonto metai: 2025, Įrenginys yra labai geros techninės būklės po modernizacijos 2025 metais, prijungtas ir galima išbandyti. Valdymo sistema Heidenhain iTNC 530, priedai: įrankiai, spaudimo kampai, ruošinio jutiklis. Hnodpfx Aoxz E N Dof Isg

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Eiga X ašyje: 500 mm Eiga Y ašyje: 400 mm Eiga Z ašyje: 400 mm Sūkių diapazonas: 50 – 2500 aps./min Pavaros galia: 2,7 / 4,4 kW Įrankio laikiklis: SK 40 su hidrauliniu spaustuvu pagal DIN 2080 Stalo tipas: Fiksuotas arba pasukamas stalas Stalo tvirtinimo paviršius: 650 x 380 mm Hnedpew I A D Tefx Af Ijg Svoris: 1600 kg Matmenys (su saugos zona): apytiksl. 2500 x 2700 x 1950 mm Dažymas: RAL 6011 reseda žalia Skaitmeninis indikatorius: 3 ašių HEIDENHAIN Priedai: Centrinis tepimas, KSS vonelė, papildoma įranga pagal užklausą

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 50 aps./min, plunksnos brūkšnys: 90 mm, Dear Sir or Madam, We are pleased to offer you a meticulously maintained milling machine: Deckel FP4M (K) aktiv, equipped with a rotary-swivel tilting table and 4-axis digital readout. Thanks to its comprehensive features, this model is a real highlight among conventional machine tools. The machine has been thoroughly inspected in our workshop, is in excellent condition, and is immediately available for operation. We look forward to your inquiry! Availability: Immediately available Machine no.: xxxx-xxxx Year of manufacture: xxxx Hedovvtlgspfx Af Ieng Table design: Rotary-swivel tilting table Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further equipment and accessories include: 4-axis digital readout Heidenhain, 3-axis active control, hydraulic tool clamping, rotary-swivel tilting table, coolant system, machine leveling pads, operating manual, and much more on request... Our service promise to you: - We are a certified master company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your chosen machine - You are free to choose the colour scheme of your machine - Additional accessories such as tooling can be included in your order upon request - We can also install further accessories such as safety devices upon request - We are happy to arrange shipping and/or installation

Sąlyga: naudotas, Gamybos metai: 1979, X-axis travel: 1,800 mm Y-axis travel: 1,200 mm Z-axis travel: 900 mm Total power requirement: 50 kW Machine weight: approx. 15 t Space requirement: approx. [blank] m BOHNER & KÖHLE Universal milling machine for toolmaking with HEIDENHAIN CNC control Model: WF 3 / 12 TNC 426 Year of manufacture: 1979 / modernized in 1999 Serial no.: 178 _____ Table size: 1,600 x 1,200 mm Table travels: Longitudinal (X): 1,800 mm Cross (Y): 1,200 mm Rotary (manual): 360° Table load capacity: approx. 4,000 kg Vertical saddle travel (Z): 900 mm Vertical milling head travel (W): 300 mm Milling head swiveling: 2 x 90° Hodpfot Hw Enex Af Ieng Installation height under spindle: 1,000 mm Spindle overhang: 1,230 mm Maximum workpiece diameter for rotary milling: 2,100 mm Spindle taper: SK 50 Spindle speeds (infinitely variable): 0 – 3,200 rpm Milling head feed per spindle revolution: 0.04 - 0.4 mm/min Feed rate longitudinal & cross (stepless): 100 – 4,000 mm/min Creep feed: 2 - 8 mm/min Rapid traverse up to: 10,000 mm/min Spindle drive: 22 kW Total drive approx. 50 kW - 380 V - 50 Hz Weight approx.: 15 t Accessories / Special equipment: • HEIDENHAIN CNC path control type TNC 426 CB for 4 axes (?). Originally delivered as a manual machine, upgraded in 1999 with the above control. Operation via pendant panel control with screen. • Hydromechanical clamping of travel axes, hydraulic oil cooler. • Approx. 20 SK 50 tool holders, angle milling head, electric tool clamping device. • Lateral supports for the table, separate control cabinet. • Rotary table can be manually turned and positioned. • RS 232 or RJ 45 interface for direct programming. Condition: good – demonstration ready; robust and very easy-to-handle machine Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Additional milling machines and machining centers of all types and sizes available from stock at any time!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Finish, CE Compliant! Technical Data: - Year of manufacture: 1984 | Machine No.: 2203-1429 - Fixed angle table (newly planed) - Spindle speed: 50 – 2,500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1,300 mm/min - Travel (X/Y/Z): 500 / 400 / 400 mm - Vertical milling head on spindle support, adjustable by 150 mm - Vertical and horizontal quill – SK40 taper - Vertical quill extendable by 90 mm - Drawbar system: M16 - Weight: approx. 1,500 kg Accessories & Equipment: - 3-axis Heidenhain digital readout - Coolant system Hnedpfxow N Sfvj Af Iog - Chip tray - Central lubrication About the Machine: For sale is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, with minimal play in the handwheels and all spindles move smoothly and evenly. Even at maximum spindle speeds, the milling machine operates quietly. Rapid traverse is available in all axes, and all bellows are as new. The fixed angle table has been newly planed. This is a reliable and user-friendly machine. The oil has been changed and both mechanical and electrical systems have been checked. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power on site.