Gręžimo staklės

Deckel FP3 LV Typ 2309

Sąlyga: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection Iodorqwbiopfx Abkotr • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories • Counter supports for milling arbor • Milling arbor ø32 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Control: 3-axis active contouring control Heidenhain TNC 123 Spindle Speed: 40 - 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque/milling performance Itsdpjv Nqu Ejfx Abksr Feed Rate: 5 to 500 mm/min, infinitely variable Rapid Traverse: 1.2 m/min Quill: Extendable quill, vertical 60 mm, SK40, M16 draw thread Axes (X/Y/Z): 300/160/340 mm Swivel Table: 600 x 210 mm, max. load 200 kg

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Dear Sir or Madam, We hereby offer milling machines of the type Deckel FP3. Each machine undergoes at least a technical inspection in our workshop and is therefore fully functional. We look forward to your enquiry! Delivery time: on request Itjdpfjq H Eabsx Abker Dimensions: 2.00 x 1.60 x 1.90 m (L x W x H) Weight: approx. 1,500 kg Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 380 mm Table clamping surface: 800 x 420 mm Spindle speed range: 40–2,000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10–500 mm/min Rapid traverse: approx. 1,500 mm/min Further equipment and accessories: on request Our service commitment to you: - We are a certified master workshop / specialist company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and, if required, worn parts are replaced in advance - Upon request, we will perform either a complete or partial overhaul of your chosen machine - You are free to choose the paint color of your selected machine - Upon request, you can order additional accessories such as tools, etc., directly with your purchase - Upon request, we can install further accessories such as safety devices, etc., for you - We are also happy to take care of shipping and/or installation on site

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Technical data: Iedpfx Ajwd Uinjbkotr Working length: 2600 mm Frame gap: 2150 mm Press force: 45 tons CNC control: DELEM DA 66 W Controlled axes: Y1/Y2; X; R; Z1/Z2 Motorized adjustable back gauge with 4 stop fingers Throat depth: 310 mm Working height: 930 mm Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3000 x 2150 x 2150 mm Weight: approx. 5 tons Accessories: 1 set of standard tooling Condition: The machine is in very good condition. The seller assumes no liability for typing or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Weiler Primus VC Präzisions-Drehmaschine Baujahr: 2011 Technische Daten Itsdpew Ebdbjfx Abkjr Drehdurchmesser: 250 mm Drehlänge: 500 mm Spitzenhöhe: 140 mm Umlaufdurchmesser über Planschlitten: 280 mm Max. Umlaufdurchmesser über Querschlitten: 150 mm Hauptspindel: Drehzahlbereich – Hauptspindel: 30 – 4.000 min⁻¹ Leistung: 4,0 kW Anzahl der Gangstufen: 1 Spindelaufnahme: Größe 5 / DIN 55027 Spindeldurchmesser im vorderen Lager: 70 mm Spindelbohrung: 40 mm Durchlass (Stangendurchlass): 40 mm Werkzeughalter: System: MultiFix B Werkzeugquerschnitt: 20 x 20 mm Reitstock: Pinolenhub: 85 mm Pinolendurchmesser: 40 mm Reitstockkegel: MK 3 Vorschübe: Anzahl der Vorschübe: 24 Längsvorschub: 0,02 – 0,63 mm/U Quervorschub: 0,006 – 0,2 mm/U Gewindeschneiden: Metrisch: 0,25 – 8 mm Zoll: 80 – 2 1/” Verfahrwege: X-Achse (Querschlittenverstellung): 150 mm Z-Achse über Querschlitten: 500 mm Z-Achse über Oberschlitten: 110 mm Gesamtanschlusswert: 15 kVA Maschinengewicht: ca. 800 kg Platzbedarf: 1400 x 935 x 1550 mm Zubehör/Optionen: - Dokumentation - 3-Backenfutter Ø 160 mm, mit Backen - 4-Backenfutter Ø 160 mm, mit Backen - Spannzangenfutter inkl. Spannzangen - Reitstock - Multifix-Werkzeughalter, mit Haltern - Mitlaufende Lünette - Wechselräder - Verschiedenes Werkzeug - Lista Werkzeugschrank - Ersatzteile - usw. Unter Strom in unserem Lager.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS cycle-controlled, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Travel X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Itedpfx Aewyn Rqsbkjr Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed X and Y: 2 to 1600 mm/min, infinitely variable Feed Z: 2 to 1000 mm/min, infinitely variable Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed via 18 gearbox steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant system - Control cabinet fixed to the machine - Fixed angle table - Operating manual and circuit diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and Equipment: Operating manual, electrical schematics Machine mounting feet About the Machine: We offer a Hermle UWF 802 M milling machine with NC control HS cycle control, year 1998, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is extremely user-friendly. Take the opportunity to view the machine under power on site and see its condition for yourself.

Sąlyga: paruoštas naudoti (naudotas), An older precision cylindrical grinding machine from Kellenberger, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, maximum workpiece weight: 3 kg, maximum workpiece diameter: 245 mm, maximum workpiece length: 130 mm. An on-site inspection is possible. Itsdpfsw Edpgjx Abker

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 2 500 kg, Dumeta CHGK-5-NDPU Roller Stand Itodewffxiepfx Abker Load capacity: 2,500 kg Was a misinvestment and has hardly been used, therefore in absolutely as-new condition. The unit is available for immediate delivery.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis K&C New Digital Readout and Infinitely Variable Feed on 3 Axes – Excellent CONDITION Technical Data: - Year of manufacture: 1983 - Machine No.: 2102-2444 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel distances X/Y/Z: 300/160/340 mm - Vertical milling head adjustable on column by 100 mm - Vertical and horizontal quill – SK40 - Drawbar system S20x2 - Weight approx. 800 kg Accessories and Equipment: - 3-axis digital display K&C newly fitted with manufacturer’s warranty and operating instructions. Display unit: Setting reference points, zero points, input of coordinates, mm/inch conversion, absolute or incremental coordinates, circle functions, hole array, radius milling functions, etc. Itedpfx Abjtwlwzsksr - Coolant system - Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, year 1983, in outstanding condition. The machine shows minimal backlash and all lead screws move smoothly. Even at maximum speeds the milling machine runs very quietly. On this newer FP1 model, the feed can be steplessly regulated on all three axes, and rapid traverse is also available on these axes. The FP1 was located in a training workshop and was only used intermittently. An oil change has been performed. The machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site.

Sąlyga: naudotas, naudotas Michael Deckel S11 – visiškai veikiantis Itsdpfxjx Hyn Ie Abkjr