Frezavimo staklės - universalios

DECKEL FP 2

Būklė: labai geros būklės (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 with 3-axis Heidenhain TNC 111 Active Digital Readout – including accessories – Excellent Condition Technical Data: >> Year of manufacture: 1979 Machine No. 2202-10512 >> Fixed angle table >> Spindle speed: 25 – 2,500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake Codpfx Ajy H Ibcsf Aerb >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head transversely adjustable on spindle bracket: 150 mm >> Vertical and horizontal quill – SK40, extendable >> Draw bar system: M16 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis TNC 111 active digital display, Heidenhain >> Coolant system >> Central lubrication system >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, counterholder, Dividing head with three-jaw chuck, machine vice, counterholder, indexing plates, and much more About the machine: Offered for sale is a universal milling machine Deckel FP2 in outstanding condition. The FP2 originates from a government facility laboratory where it saw very little use. It comes with an accessory cabinet filled with comprehensive tooling. The machine has minimal backlash and all spindles move smoothly. The geometry is excellent. Even at maximum spindle speeds, the milling machine runs smoothly. On this newer FP2 model, feed is steplessly adjustable on all three axes; it also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With this Heidenhain distance control system, you can program measurements which the machine automatically traverses to. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine live under power on-site.

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories Crjdpfx Aforqwbij Aeb • Counter supports for milling arbor • Milling arbor ø32 mm

Būklė: geras (naudotas), Gamybos metai: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm Travel distances X-axis 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / Special features: • Vertical milling head, swiveling L/R • Fixed angular clamping table • Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Crodpjm Uygvefx Af Asb DE - 44143 Dortmund - Wambel

Gamybos metai: 1987, būklė: paruoštas naudoti (naudotas), Galimi trys seni Hermle ir Deckel frezavimo staklės. 1) Hermle FW 801 horizontalios frezavimo staklės, įrankių laikiklis: SK40, eigos X/Y/Z: 430mm/150mm/420mm, apsukos: 2000 sūkių/min, staklių matmenys X/Y/Z: apie 2250mm/1700mm/1500mm, svoris: apie 1000kg. 2) Hermle FW 710 universalios frezavimo staklės, įrankių laikiklis: SK30, stalo matmenys X/Y: 710mm/190mm, eigos X/Y/Z: 400mm/150mm/350mm, apsukos: 2240 sūkių/min, staklių matmenys X/Y/Z: apie 1500mm/1000mm/1800mm, svoris: apie 700kg. 3) Deckel FP 2, pagaminimo metai: 1987, įrankių laikiklis: SK40, eigos X/Y/Z: 300mm/220mm/400mm, stalo matmenys X/Y: 620mm/390mm, maksimali stalo apkrova: 250kg, apsukos: 3150 sūkių/min, pastūma: 3600mm/min, greitaeiga: 4000mm/min, staklių matmenys X/Y/Z: apie 2500mm/2100mm/1800mm, svoris: apie 1250kg, valdymas: Heidenhain TNC 355. Csdpjy I Adhefx Af Asrb Galima apžiūra vietoje. Galimas atskiras pardavimas, tačiau pirmenybė teikiama komplektiniam pardavimui.

Būklė: naudotas, Technical Details: Codpfx Aovr S Ulef Asrb Spindle diameter: 130 mm Drilling depth: 1,380 mm X-travel: 2,500 mm Y-travel: 1,600 mm Z-travel: 380 mm W-axis: 900 mm spindle feed U-axis: 320 mm facing slide feed Control system: on request Tool holder: ISO SK50 Speed – facing slide: 4.5–180 rpm Drive spindle speed: 4.5–900 rpm Feed – x/y: 5–2,000 Total power requirement: approx. 40 kW Machine weight approx.: < 35 t plus auxiliary equipment The machine can be offered in four different sales options. Please choose! 1. The machine is in as-new mechanical condition, as it stands. 2. The machine as it stands, including plate table 4,000 x 2,000 x 300 mm = Stock No. 1101081 3. The machine rewired, with new control cabinet, digital readout, 4-axis, Siemens AC drives, Siemens axis motors (50A/31Nm) with 12 month warranty on all new parts. 4. Additional accessories can also be optionally offered, e.g. coolant system, chip conveyor, enclosure, etc. Please contact us to discuss these options.

Būklė: paruoštas naudoti (naudotas), DECKEL FP 2 įrankinė frezavimo staklė iš mokymo įstaigos - Puikiai prižiūrėta originali būklė - Ilgis / Plotis / Aukštis: 400x200x400 mm - Naujas trijų ašių skaitmeninis indikatorius - Kampinis stalas – stalo paviršiaus plotas 700x350 mm - Sukimosi greičio diapazonas: 40–2000 aps./min - Automatiniai padavimai ir greitieji eiga visose trijose ašyse - Įrankio tvirtinimas ISO 40 - Vertikalus / horizontalus frezavimo blokas - Vertikalioji galva su pasukamu ir gręžimo pinolu - Aušinimo skysčio įranga - Nauja X ašies veržlė - Mašinos kojos Crsdpfx Afox Hyuhs Ajb - Įvairūs įrankių laikikliai - Drožlių lakštas / mašinos koja - Dokumentacija Išmatavimai: Ilgis x Plotis x Aukštis: 1,5 x 1,7 x 1,8 m / Svoris: 1500 kg Galimi netikslumai ar klaidos aprašyme.

Būklė: paruoštas naudoti (naudotas), Deckel FP 2 NC universali frezavimo staklės Fräsmachine Universalfräse TNC 320 / 321 Darbo eiga: x- 300 mm | y- 300 mm | z- 400 mm Be pakopų reguliuojamas apsisukimų skaičius 31,5 - 5000 aps./min eigas nuo 2 iki 4000 mm/min Greita eiga 4000 mm/min Įrankių tvirtinimas: SK 40 Gręžtuvo eiga: 80 mm Staklių svoris: 1350 kg Maloniai kviečiame apžiūrėti stakles vietoje. Taip pat galime Jums suorganizuoti ekonomišką transportą per vežimo įmonę! Jūs gausite tinkamai išrašytą sąskaitą faktūrą. Cedpfxoxfkm Ae Af Aerb Užsienio klientams galime išrašyti sąskaitą be PVM. Tam būtinas galiojantis PVM mokėtojo kodas. Pasiliekame teisę parduoti prekę bet kuriuo metu. Apsilankykite mūsų parduotuvėje ir peržiūrėkite kitus mūsų pasiūlymus. Nurodyti įmonių pavadinimai ir prekių ženklai priklauso jų savininkams ir naudojami tik produktų atpažinimui bei aprašymui. Galimi nedideli techninių duomenų bei aprašymo neatitikimai vagy klaidos – pasiliekame teisę juos pataisyti.

Būklė: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Csdjtycg Sjpfx Af Aorb Stroke rate 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Required space approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Būklė: paruoštas naudoti (naudotas), Įrankių frezavimo staklės / DECKEL FP 2 su 3 ašių Heidenhain skaitmenine indikacija ND 780 - Eigos X/Y/Z 450x230x400 mm - Automatiniai padavimai / greitieji padavimai visose 3 ašyse - Heidenhain 3 ašių skaitmeninė indikacija ND 780 - Sukimosi greičių diapazonas 40-2000 aps./min. Csdpfx Afoy Ipgio Aorb - Universalus pasvirimo/pasukimo/sukimo stalas - Horizontalus / vertikalus frezavimo įrenginys su vertikaliu slydimo galvute - Įrankio tvirtinimas ISO 40 - Aušinimo sistema - Drožlių padėklas - Įvairūs įrankių laikikliai ir spaustuvinės įvorės - Dokumentacija Matmenys: Ilgis x Plotis x Aukštis 1,5x1,7x1,8 m / Svoris 1600 kg Pasiliekama teisė į klaidas ir duomenų netikslumus.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, -KOM 3149- Siūlomas griovelio galvutė, skirta FP2 Deckel frezavimo staklėms. Galvutė sukasi 360 laipsnių aplink flanšo plokštę. Visi vedančiųjų paviršiai yra labai geros būklės. Griovelio galvutės matmenys nurodyti paskutinėje nuotraukoje. Matmenys: apie 600 mm x 450 mm x 500 mm. Svoris: apie 35 kg Crsdpfxswxxd Ss Af Aeb

Būklė: naudotas, Gamybos metai: 1999, X-axis travel: 600 mm Y-axis travel: 525 mm Z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speed – stepless: 20 – 12,000 rpm Feed rates X/Y/Z axis: 20 – 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Maximum table load: 350 kg Control system: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight: approx. 4.2 t Credpfx Afjtqqmhe Aeb Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Būklė: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electronic hand controller - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Spindle speed: 31.5 - 3,150 rpm with 21 gear steps Feed rate: 4-2000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg Credpfx Aswid Spef Aeb - C-axis rotation: 360° - A-axis tilting: 15°/45° - B-axis swiveling: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional features: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space including auxiliary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and in operation by appointment.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 220 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 25 aps./min, paskutinio kapitalinio remonto metai: 2026, Dear Sir or Madam, For sale is a Deckel FP2 Aktiv milling machine. This newer model stands out particularly due to its stepless speed control with Heidenhain Aktiv control system, which makes operation both exceptionally simple and extremely comfortable. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary/swivel tilting table Travel paths: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feeds: stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed regulation on all 3 axes, Heidenhain digital readout with Aktiv control system, coolant device, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul your selected machine Crsdpfx Ajx Hr Dzsf Aeb - On request, additional accessories such as tools can be ordered directly - On request, we can also install further equipment such as safety devices - We are happy to take care of shipping and/or installation

Būklė: naudotas, Gamybos metai: 1985, x-axis travel 485 mm y-axis travel 385 mm z-axis travel 380 mm Cjdpfx Aetqqllof Ajrb Clamping surface of table 800 x 460 mm Spindle taper SK 40 Control CONTOUR 1 Spindle speeds 50 - 2500 rpm Feed rates 10 - 1000 mm/min Rapid traverse 2 m/min Table load capacity 600 kg Quill stroke 80 mm Total power requirement 7.5 kW Machine weight approx. 2.0 t Dimensions L x W x H 2.4 x 1.7 x 1.98 m Accessories: vertical head with hydraulic tool clamping and retractable quill, fixed table, coolant system - Traversing in X/Y/Z also possible via handwheels -

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 220 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 25 aps./min, paskutinio kapitalinio remonto metai: 2026, Įranga: dokumentacija / vadovas, Dear Sir or Madam, For sale is a partially overhauled Deckel FP2. This newer version stands out above all due to its infinitely variable spindle speed control, which makes operation both extremely simple and comfortable. The machine has been extensively overhauled in our workshop and is consequently in excellent condition. You are welcome to inspect the machine on site. --- Currently 3 units available immediately! --- Availability: 3x immediate Machine number: 2202-xxxx Table: rigid angled table or rotary-swivel-tilt table Travel paths: X400mm / Y220mm / Z400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, infinitely variable feed on all 3 axes, coolant system, central lubrication, technical documentation, machine feet, safety features (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can provide complete or partial overhaul of your selected machine Csdpsy Exayofx Af Aorb - If required, you can order additional accessories such as tooling, etc. directly - On request, we can install optional equipment, such as safety devices, directly for you - We are happy to take care of shipping and/or installation