Kėlimo magnetai

D-PML 1500

Sąlyga: naudotas, Technical details: Welding current: 500 A Approximate machine weight: 128 kg Dimensions (L x W x H): 1.2 x 0.8 x 1.2 m Control: Display for welding current with 2-/4-stroke switch, pulse function, stepless adjustment Cooling system: Water-cooled with antifreeze protection Shielding gas: Solenoid valve without pressure regulator Kodpfx Afovz Abhj Ijdg Torch package: 4.0 m length Torch head: gas-cooled Ground clamp with 4.7 m ground cable Wire feed: 4-roller drive with wire diameter for 1.0/1.2 mm

Gamybos metai: 2009, Sąlyga: geras (naudotas), Lifting capacity: 30 t Precision lift Lifting height: 9 meters Kdjdpfxoqiz N Re Af Ijg

Sąlyga: geras (naudotas), Gamybos metai: 1980, X ašies eiga: 1 985 mm, Y ašies eiga: 1 620 mm, Z ašies eigos atstumas: 1 330 mm, stalo apkrova: 10 000 kg, stalo ilgis: 1 700 mm, stalo plotis: 1 520 mm, including universal milling head including spindle extension including angle plate, height 1400 mm including digital readout system X-axis travel: 1985 mm Y-axis travel: 1620 mm Z-axis travel: 1330 mm W-axis travel: 410 mm Table length: 1700 mm Table width: 1520 mm Table load capacity: 10,000 kg Spindle speed: 2.5 - 1000 rpm Tool holder: ISO 50 / ISO / BT / MK Length: 460 mm Width: 4800 mm Height: 6000 mm Weight: 25,000 kg Kdodpswrn Imjfx Af Ijg

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 78 kW (106,05 AG), kuro tipas: dyzelinas, Gamybos metai: 1992, veikimo valandos: 10 027 h, Įranga: kabina, Tyre size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22,000 kg Load hook: 20,000 kg Boom design: Upper section 3,500 mm / Lower section 3,500 mm / Intermediate piece 3,000 mm / Intermediate piece 1,500 mm Base unit: with 4-point sliding beam support Engine manufacturer / model / output: Deutz / F6L 912 / 78 kW Max. load capacity: 25,000 kg Kdodpfjrvgyxjx Af Ieg Boom length: 11,500 mm

Gamybos metai: 1960, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and center of gravity offset 300 mm: 10 t Load capacity with vertical faceplate position and center of gravity offset 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically steplessly adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range up: 140 s Swivel time for full swivel range down: 120 s Ksdpfx Ascblc Sef Iedg Hydraulic drive: 380 V Height of swivel axis above floor level: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Gamybos metai: 1998, Sąlyga: geras (naudotas), Manufacturer: UNION Model: Ti 1800 Year of manufacture: 1998 Ksdpfokwcdbox Af Ijdg Specifications: Metric / US Standard Table length: 2000 mm Table width: 1800 mm Table load capacity: 16,000 kg Feed, V axis: 1250 mm B-axis rotation: 360.000 ° B-axis rotation speed: 1.35 rpm V-axis traverse speed: 4000 mm/min Approximate dimensions: Length: 3400 mm Width: 2000 mm Height: 920 mm Weight: 6500 kg Please note: The information on this page has been provided by us and, where possible, obtained from the manufacturer to the best of our knowledge and belief. The information is given in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual terms are implied. We recommend verifying all key details.

Sąlyga: naudotas, Gamybos metai: 1969, Faceplate diameter: s mm Kjdpfx Afjv Dx Dke Iodg Swing diameter: 1000 mm Turning height: 1000 mm Machine weight approx. 5 t

Sąlyga: naudotas, Magnetic Drill, Hand Drill - Magnetic Base: Magnetor type PS 32 L - Drill Machine: AEG type HBE-IV - Spindle Taper: MK2 - Max. Drill Diameter: Ø 23 mm - Power Supply: 265 V / 200 Hz - Dimensions: 700 x 300 x H670 mm - Weight: 49 kg Kdedpfxjfc R D Ae Af Ijg

Sąlyga: naudotas, Gamybos metai: 1987, Pressure / t Stroke / mm Table size / mm Machine weight approx. 65,000 kg Make: Schäfer Model: SVRM 4-Roller Plate Bending Machine: Year of manufacture: 1986 Kdjdpouddcajfx Af Ieg Working width: 3,000 mm Minimum pipe diameter with 600 mm roll: Ø 720 mm Minimum pipe diameter with 360 mm roll: Ø 460 mm Plate thickness up to (depending on material): 50 mm Material SA-738 B working width: 2,500 mm Material SA-738 B plate thickness: 35 mm Cone bending: For cone bending, all rolls except the top roll can be tilted. The roll positions can be read on indicator instruments. For semi-automatic or fully automatic operation of the machine, the roll bearings are equipped with scale bars and cam followers for limit switch actuation. This allows the rolls to return to the same preset position repeatedly, ensuring a very high consistency of the bent sections.

Sąlyga: geras (naudotas), Gamybos metai: 1956, Slotting machine, Shaper, Keyseater, Keyway Slotting Machine, Keyway Shaping Machine, Keyway Broaching Tool, Broaching Machine, Slotting Machine, Horizontal Shaper, Planer, Schepping - Manufacturer: Elliott, Horizontal Shaper Type 24M SHAPER Kdsdsh Nvy Eopfx Af Ijg - Stroke: 610 mm - Strokes per minute: 8 - 74 rpm - Clamping table: 580 x 330 mm - Travel path: X/Y/Z 375/755/292 mm - T-slot: 20 mm - Drive: 3.7 kW - Dimensions: 2080/1120/H1550 mm - Weight: 1520 kg