Įsigyti naudotą techniką (278)

Sąlyga: naujas, Gamybos metai: 2025, A thoroughly reliable, mobile family: You can obtain AL-KO POWER UNIT® extraction systems for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes, or an ideal supplement to existing stationary systems. Your advantages: • IE3 motor as standard • Approx. 73 m² filter area Godpfehkzt Nox Abmjuk • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) • Optional type-tested rotary valve (FSA) • Tested backpressure flap • Integrated automatic extinguishing system Technical data: • Rated motor power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Rated airflow: 6,927 m³/h • Negative pressure at rated flow: 2,543 Pa • Suction connection: 350 mm • Noise level: 71 dB(A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg - Dust class H3 Location: In stock at 54634 Bitburg - Immediately available – as the unit is in stock Subject to prior sale

Sąlyga: naujas, Gamybos metai: 2025, Compact design Maximum reliability High suction capacity Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emissions Extended filter service life Easy emptying Delivered ready to plug in with rotary valve (cell wheel sluice) Models with cell wheel sluice: AL-KO POWER UNIT® 300 ZRS Inlet diameter: 300 mm Motor rated power: 7.5 kW / 3 Ph Gujdpfx Aehkzu Aebmok Voltage: 400 V / 50 Hz Maximum air flow: 4,900 m³/h – 6,000 m³/h Nominal air flow: 5,089 m³/h Vacuum: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Sąlyga: naujas, Gamybos metai: 2025, Raw Air Extraction Unit ASA 163 With standard mobility chassis Dimensions and Weights Chip collection volume: 175 l Suction inlet external diameter: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connection voltage: 400 V Guedpfjhk S S Ejx Abmek Mains frequency: 50 Hz Filter Filter area: 2.2 m² Noise Emission Max. sound pressure level: 83 dB(A) Airflow Nominal airflow: 2200 m³/h For milling, planing, and saw chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength, special plastic Quick-release fasteners for filter and chip bags for easy maintenance Robust, high-quality construction Easily movable thanks to swivel castors Low power consumption Extraction units comply with dust class L Scope of delivery: System body with pre-assembled fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Sąlyga: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Equipment Details Godpfx Aehp Rcrobmouk Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Sąlyga: naujas, Gamybos metai: 2025, Heavy, robust cast construction High running smoothness thanks to ground, oil-bath lubricated gearbox gears Right-/left-hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed on the X-axis Coolant system Machine lamp Gear head ± 60° swiveling Gusdpfx Abjg U Uv Ujmjk Adjustable gibs Massive, hand-scraped dovetail column guide for maximum stability and precision Height-adjustable, large protective screen with microswitch Drilling depth stop Digital position display DRO 5 Drilling / tapping function Massive, large-dimensioned cross table, precisely surface-machined with T-slots and adjustable gibs Heavy-duty cast machine base with chip tray Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 rpm via two infinitely variable speed settings Dimensions and weight Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/milling performance Max. facing head diameter: 63 mm Max. end mill diameter: 26 mm Drilling capacity steel (S235JR): 24 mm Continuous drilling capacity steel (S235JR): 20 mm Electrical data Connection voltage: 230 V Mains frequency: 50 Hz Electrical connection Total connected load: 1.5 kW Milling table horizontal Length: 800 mm Width: 240 mm Distance vertical spindle – milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Standards and certifications Standard: DIN EN 55011 EMC class: C2 Travel Manual X-axis: 560 mm Manual Y-axis: 195 mm Manual Z-axis: 350 mm Automatic X-axis: 480 mm Vertical spindle Overhang: 258 mm Spindle taper: MT 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M 16 Swivel range milling head Z-X plane: ± 45 ° Quill diameter: 75 mm Quill stroke: 120 mm Location: Ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Holzkraft Edge Sander Model: KSO 200 F with Veneer Sanding Attachment Sanding unit tiltable up to 45° via lever The machine base, made of welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on or off as needed Graphite-coated platen for longer sanding belt service life Height-adjustable sanding table for full utilization of the belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tensioner automatically compensates for belt length differences Double extraction ports Extendable roller table extension Sanding drum with rubber coating Veneer edge sanding device with contact shoe featuring fine adjustment, support rollers, and stop rulers Grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Extraction port diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Min. table height 735 mm Max. table height 965 mm Long table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table min. height 720 mm Cross table max. height 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Supply voltage 400 V Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Gsdslht H Nspfx Abmeuk Location: In stock at 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Weima Shredder / Single-Shaft Shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used thousands of times worldwide in woodworking facilities, for example. The high quantity of these highly sought-after shredders ensures reliable, well-established technology with the best price-performance ratio. The machines are characterized by their very robust construction, guaranteeing extremely high durability (even outdoors). Gusdpfxjmhh Ido Abmjk Intuitive Operation via Siemens PLC Control with Touch Display To ensure the electronics are optimally matched to the machine, we design, build, and wire our own control cabinets. We use only high-quality components—from Siemens or Rittal, for example. Intuitive touch interfaces guarantee quick adjustments. Features such as adjustable pusher stroke and stop provide high throughput. The integrated overload protection also prevents damage to the machine. No Material Bridging Thanks to Freely-Cutting Hopper Design The hopper performs several functions. It is the entry point for feeding material to be shredded—manually, mechanically, or by conveyor belt. The large opening even allows for the convenient loading of very large pieces. Critical for shredding is the special design, rounded at the front to effectively prevent material bridging. Even with bulky materials, the shredder cuts itself free automatically. Hopper extensions and lids with gas struts are available as options. Long-Lasting Rotor Bearings Thanks to Offset Design Rotor bearings must be particularly robust due to the extreme stresses during shredding operations. To prevent dust or foreign materials from entering, we've designed the bearing to be offset from the machine frame. This also makes it very service-friendly and easily accessible. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 – 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Final particle size (mm): Extraction connector (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - Second row of knives - Log spacer Location: Incoming at warehouse 54634 Bitburg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Combined woodworking machine, 4-function, HOLZKRAFT CU 410c F 26 N Tersa -- Technical Data -- - Circular Saw - Cutting length: 2,600 mm Gsdpod Dtc Tefx Abmeuk Max. saw blade diameter: 315 mm Max. cutting height at 90° / 45°: 100 / 79 mm Max. crosscut width left of saw blade: 2,310 mm Cutting width at rip fence: 900 mm Saw blade tilting: 90° - 45° - Planer (Jointer) - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs. - Thickness Planer - Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. cutting depth: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning cutter diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special offer price - Location: Ex stock 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2024, Advantages - Compact design, space-saving - Powerful, high extraction capacity, low operating costs - Easy maintenance, long filter service life - Universally applicable, variable accessories Gusdebpg E Espfx Abmek - High flexibility - Mobile construction - Extraction technology with front sheet system Technical Data: Motor rated power: 0.75 kW / 2.1 kW Motor speed: 960 / 1430 rpm Air volume: 6,800 m³/h Filter area: 2 m² (2 x 1 m) Connection diameter: 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Planer-thicknesser machine Holzkraft FS 30 Classic Tersa Equipped with Tersa cutter block and quick-change planer blade system The Tersa planer blade system enables blade changes in seconds and ensures exceptionally quiet operation. Helically-toothed steel feed roller for continuous and consistent wood feed Extra-long planer tables Large planer fence remains in place when opening the planer tables Planer tables open towards the rear High machine weight Gujdpfxebuldye Abmok Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thickness table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutter block diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutter block, anodized planer fence Available ex-stock Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Paint mist extraction unit AL-KO Colour Jet 1 Paint mist extraction unit, ready for operation, 1 sqm filter area with pre-filter and fine filter, connection diameter 300 mm, 1.5 kW ex-rated motor (suitable for installation in Zone 22 according to ATEX), single-stage switch + 5 m cable with plug and throttle valve. • Compact, space-saving sheet steel construction • Chassis with wheels • Indirect extraction near the floor • Completely pre-assembled • With connection cable and phase reverser • Adjustable side panels • Optimized spray mist capture thanks to patented front panel hood • Long filter service life • High-performance fans with low noise level • Filter wall with special mats Gsdsbumr Sspfx Abmjuk • Exhaust nozzle with integrated throttle valve Motor power: 1.5 kW Speed: 1400 rpm Nominal airflow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (Width 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Sąlyga: naujas, Gamybos metai: 2025, Quick-release belt tension via lever Upper belt support with graphite coating 250 mm large, balanced belt rollers provide optimal drive. With electric height adjustment With dust extraction and noise protection systems With noise protection certificate With two speeds Adapts to surfaces using a swiveling sanding shoe Beveled surfaces Standard with right-hand and left-hand rotation The quick-release belt tension allows fast and effortless changing of sanding belts. Delivery is partially assembled Dimensions and weights: Gsdpfx Abeff Hdbemouk Length: approx. 4540 mm Width/depth: approx. 1510 mm Height: approx. 1510 mm Weight: approx. 475 kg Dust extraction connection: Extraction nozzle diameter: 2 x 140 mm Worktable(s): Worktable height adjustment: 620 mm Max. working width on table: 900 mm Electrical data: Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Sanding unit: Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece: Max. height: 590 mm Max. workpiece height longer than worktable: 180 mm Explanation regarding max. workpiece height longer than worktable: Machining of the workpiece with overhang to the right beyond the worktable is possible.

Sąlyga: naujas, Gamybos metai: 2025, Designed for professional structuring and sanding work Motorized height adjustment of the working units with digital display Units can be activated individually Highly durable rubberized conveyor belt Infinitely variable feed Constant infeed height Gusdpjff Hdijfx Abmjk STR L models with infinitely variable, inverter-controlled brush speed: this allows precise speed adjustment to the material, making them particularly suitable for sensitive materials. Unit for saw-cut appearance optionally available Dimensions and Weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust Extraction Connection Extraction port diameter: 2 x 150 mm Brushes Diameter: 190 mm Length: 300 mm Speed: 1500 rpm Electrical Data Drive motor power: 2 x 3.0 kW Feed motor power: 0.22 kW Connected load: 6.25 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Noise Emission Sound power level Lw (idle without extraction): 65 dB(A) Sanding Unit Max. sanding width: 300 mm Feed Unit Feed speed: 1 – 13 m/min Workpiece Max. height: 300 mm Max. weight: 100 kg

Sąlyga: geras (naudotas), Lathe Godpfx Aei Akv Sebmjuk Length: 1750 mm Motor power: 3 kW Voltage: 380 Volt Location: in stock, 54634 Bitburg - immediately available -

Sąlyga: geras (naudotas), Gamybos metai: 1982, Naudota storio obliavimo staklė Gebr. Martin, tipas: T 42 Pagaminimo metai: 1982 Obliavimo plotis: 630 mm Gjdpfx Ajt U Rn Sobmeuk Obliavimo aukštis: 250 mm Padavimo greitis: 8-20 m/min Nusiurbimo jungtis: 160 mm Svoris: apie 870 kg Gumuoti įvado ir išvado volai Dvivietis peilių velenas su tiesiais obliavimo peiliais Centrinis tepimas Obliavimo aukštis reguliuojamas rankiniu ratuku Žvaigždės–trikampio jungiklis Vieta: sandėlyje 54634 Bitburg - galima iš karto -

Sąlyga: naujas, Gamybos metai: 2024, Hoku Houfek Long Hole Boring Machine LLB VD 20 R Excellent condition - Top machine - Godpfeu Agzxox Abmouk Motor: 1.5/1.9 kW Cross travel (Y-axis): 250 mm Longitudinal travel (X-axis): 340 mm Vertical travel (Z-axis): 200 mm 2 speeds: 1,440 and 2,880 rpm Single-lever dowel boring unit with divisions: 16 - 22 - 25 - 32 mm 2 manual eccentric clamps Manual digital display for drill height Table dimensions: 700 x 400 mm Drill chuck max. diameter: 20 mm Table rotatable +/- 45° Weight: approx. 345 kg Available immediately from stock in 54634 Bitburg Subject to prior sale,

Sąlyga: naujas, Gamybos metai: 2024, Single-Shaft Shredder HOKUTech Promotional Model H600 Compact, Robust, High Throughput Guedpjutmw Hofx Abmok The H600 high-performance shredder with its flexible application possibilities can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips, achieving significant volume reduction of bulky materials. The hydraulically controlled pusher feeds wood waste to be shredded into the rotor’s cutting area, automatically controlled based on load. The high-performance full-steel E-rotor has a diameter of 252 mm and operates at a rotor speed of 85–95 rpm. The concave-ground, aggressive, and quadruple-turnable knives / reversible cutting crowns are mounted in milled knife pockets on dedicated knife holders. This highly efficient system guarantees high throughput, low energy consumption, and optimal discharge of shredded material by minimizing the cutting gap between counter-knife and rotor. Chip size (10–60 mm). Technical Data: • Hopper opening: 600 x 800 mm • Hopper volume: 0.6 m³ • Rotor working width: 600 mm • Rotor diameter: 252 mm • Drive power: 15 kW • Rotor speed: 90 rpm Location: Arriving at warehouse 54634 Bitburg - available upon request -

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft edge sanding machine: KSO 150 F PRO With oscillating sanding belt for optimum sanding results Article number: 5390020 Brand: Holzkraft Sanding unit can be swiveled using a hand crank The welded steel machine base ensures high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for superior sanding results Oscillation can be switched on or off as required Sanding pad with graphite coating for extended belt service life Height-adjustable sanding table allows the entire belt width to be utilized Auxiliary table with extraction ports for sanding radii on the rubber-coated deflection roller Sleeve sanding device with attachable worktable Spring-loaded belt tension automatically compensates for belt length differences Adjustable stops make it ideal for veneer sanding The grooved veneer stop allows for precise trimming of the veneer overhang TECHNICAL DATA Dimensions and Weight Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100mm Work Table(s) Work table length: 950mm Work table width: 450mm Work table height adjustment: 110mm Guedpfx Aov Sk Nnebmok Electrical Data Supply voltage: 400V Mains frequency: 50Hz Power of oscillation motor: 0.11kW Sanding Unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt speed: 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Swiveling range of sanding unit: 0 – 45° SCOPE OF DELIVERY 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Mitre gauge

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor: RLA 140 For Wood Dust and Shavings, Designed for Commercial Use Article Number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation All models equipped with bump protection Application Area Designed for commercial use Gujdov Sk Tmspfx Abmjk For all woodworking machines with a matching extraction nozzle diameter High-quality, sophisticated construction Robust and compact housing made of galvanized steel sheet Extraction nozzle can be converted from left to right without difficulty, ensuring flexible use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Extractor is delivered fully pre-assembled, allowing for quick commissioning All models are mobile For model RLA 210: optimal chip distribution in the chip containers due to large filter surface Filter Description Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated for long service life Filter standardly in antistatic design, tested and approved according to category M-BIA The fan is downstream of the filter TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/depth (product) approx. 830 mm Height (product) approx. 1750 mm Weight (net) approx. 210 kg Chip collection volume: 165 l Connection diameter outside extraction nozzle inlet: 140 mm Extraction nozzle axis to floor: 850 mm Electrical Data Connection voltage: 400V Mains frequency: 50 Hz Extraction motor efficiency class: IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Filter cleaning: manual Noise Emission Max. sound pressure level: 71 dB(A) Airflow Nominal airflow: 1108 m³/h Max. airflow: 1750 m³/h SCOPE OF DELIVERY Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Manual cleaning

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Optimum D 1340 GDE, year 2001, in excellent condition – previously used as a training machine – Swing over bed: 330 mm Swing over cross slide: 160 mm Turning length: 800 mm Total power requirement: 2 kW Machine weight approx.: 400 kg Space requirement approx.: 2000 x 1000 x 1600 mm Bar capacity: 38 mm Spindle speed range: 70 – 2000 rpm Spindle nose: — Gusdpsvutyhofx Abmok Feed range: 0.025 – 2.553 mm/rev Threading capability: - Metric: 0.25 – 11 mm - Imperial: 4 – 112 TPI Tailstock: MT 3 Control: conventional 3-jaw chuck included. Location: ex stock 54634 Bitburg - available at short notice -

Sąlyga: reikia remonto (naudotas), Gamybos metai: 2004, Schneider compressed air screw compressor defective Unit requires repair. Gsdpfjvmivcjx Abmouk Machine is being sold at a low price due to the necessary repair. Motor power: 11 kW Flow rate: 1,500 liters/min Compressor pressure: 10 bar Location: ex stock 54634 Bitburg Machine is sold as defective No warranty – no guarantee –

Sąlyga: geras (naudotas), Gamybos metai: 2005, Scribing and marking-out plate 1000 x 1000 with base frame Location: ex stock 54634 Bitburg - immediately available - Gjdpfxjwqx Axj Abmeuk

Sąlyga: naujas, Gamybos metai: 2025, MBSM 150-20 For grinding surfaces, edges, and for rounding Powerful motors with vibration-free operation to achieve optimal grinding results Working height adjustable via stepless tilting of the sanding unit Workpiece support table can be set at an angle Continuous flat grinding surface enables sanding of long workpieces One extraction nozzle each on the spark box and at the rear belt roller Fold-away safety shield Quick-release system allows for tool-free sanding belt replacement in seconds Simple belt tracking adjustment via adjustment screw Motor equipped with brake and safety switch Dimensions and Weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Extraction Extraction port (outer diameter): 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Noise Emission Sound pressure level at the workstation Lp (idle, without extraction): 80 dB(A) Grinding Unit Gusdpfx Ajhk Df Dobmok Maximum grinding width: 150 mm Abrasive belt length: 2000 mm Abrasive belt width: 150 mm Belt speed: 30 m/s Contact wheel diameter: 200 mm

Sąlyga: naujas, Gamybos metai: 2025, Chip Extraction Unit ASA 7703 Mobile, with 180° rotatable extraction unit For milling, planer, and saw chips (not suitable for dust) 180° rotatable extraction unit allows extraction either from below or above Robust metal impeller Equipped as standard with a high-quality chassis for improved stability and easy maneuverability Quick-release fasteners for filter and chip sacks Fine filter bag, double woven Guedpehk S Stsfx Abmek Dimensions and Weights Chip collection volume: 2 x 290 l Outside diameter extraction inlet: 260 mm Outside diameter extraction outlet: 3 x 120 mm, 1 x 100 mm Length approx.: 1900 mm Width/depth approx.: 670 mm Height approx.: 2800 mm Weight approx.: 88 kg Electrical Data No-load speed: 2950 rpm Power consumption: 4.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 5.98 m² Noise Emission Maximum sound pressure level: 98.3 dB(A) Airflow Nominal airflow rate: 7700 m³/h Maximum negative pressure: 2800 Pa Scope of delivery: Two filter bags, two chip sacks Location: Ex stock 54634 Bitburg - available at short notice -

Sąlyga: naujas, Gamybos metai: 2025, Raw Air Extractor ASA 141 With standard chassis Godpfx Aohk S Swjbmsuk Dimensions and Weights Chip collection volume: 175 l Suction inlet diameter (external): 140 mm Length approx.: 1062 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical Data Connected voltage: 230 V Mains frequency: 50 Hz Filter Filter area: 1.9 m² Noise Emission Maximum sound pressure level: 78 dB(A) Airflow Rate Nominal airflow: 1650 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content due to BIA-tested filter material with a high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easily maneuverable thanks to swivel castors Low power consumption Extraction systems comply with dust class L Scope of Delivery: Machine body with mounted fan unit Filter bag/extraction unit Chip bag/extraction unit without extraction hose