Įsigyti naudotą techniką (278)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, As-new machine, was operated at our in-house exhibition (3 days) Gedpfsbqachsx Abmeuk 5 operating hours Technical data 300-P Inlet diameter: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow: 6,000 m³/h Nominal air flow: 5,089 m³/h Vacuum: 2,280 Pa Filter area: 30 m² Chip collection capacity: 3 x 165 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Ex stock 54634 Bitburg Available immediately Subject to prior sale

Sąlyga: naujas, Gamybos metai: 2025, HSBM 2020-20 SB – Manual Folding Machine HSBM SB – Manual folding machine in heavy-duty design with segmented upper tools - Easy operation Guodpfxecnxc Nj Abmek - Segmented upper tools - Folding function with secure clamping of the workpiece via pre-tensioning of the upper beam - Heavy, compact welded construction - For simple bending applications with precise angle adjustment via end stop with scale - Particularly low-maintenance - Segment configuration: 25-30-35-40-45-75-100-150-200-200-270-400-400 mm Note on technical data: Maximum sheet thickness: Performance values refer to material with a tensile strength of 400 N/mm²; Bending capacity stainless steel: factor 0.75; Bending capacity aluminium: factor 1.2; Hardened upper tools required for bending stainless steel Model: HSBM 2020-20 SB Article No.: 3772920 Technical Specifications Max. working width: 2,020 mm Max. bending capacity steel 400 N/mm²: 2 mm Max. bending capacity steel 400 N/mm² without jaw extension: — Max. bending capacity steel 400 N/mm² with jaw extension: — Max. bending capacity stainless steel: 1.5 mm Max. bending capacity aluminium: 2.4 mm Max. bending angle: 135° Segment configuration: — Max. clearance between upper and lower beam: 120 mm Length: 2,500 mm Width: 710 mm Height: 1,500 mm Weight: 1,020 kg Location: Ex works - Free on truck -

Sąlyga: naujas, Gamybos metai: 2024, Your Advantages Stable pressing mechanism with low-wear, chrome-plated jaws Press chamber wear bushing Pre-compressor with end-position damped cylinder and bolted cover Godpecnz U Ejfx Abmsuk Control cabinet with PLC control Screw channel with discharge auger Separate oil tank with pump motor and valve control Oil temperature safety switch Mounted on a stable base frame with rubber feet Briquette length monitoring Robust design, low-maintenance technology, minimal space requirement: The C-series machines are particularly suitable for small and medium-sized companies with required throughput capacities not exceeding 50-80 kg/h or 200 to 400 kg/day. Virtually any suitable material can be briquetted, such as wood, polystyrene, foam, paper, or biomass. All machines are available in left- or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm): 50 Throughput capacity up to (kg/h): 50 (material-dependent) Hydraulic motor (kW): 5.5 Auger motor (kW): 0.55 Oil capacity (litres): 100 Weight (approx. kg): 800 Key Features at a Glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for continuous operation Briquette length monitoring: Adjusts the briquette length to a uniform value Press chamber wear bushing: Prevents wear in the pressing area Location: Ex works – free loading

Gamybos metai: 2025, Sąlyga: naujas, Sandblasting cabinets for clean blasting operations without contaminating the work environment. Suitable for a variety of blasting media, such as quartz, glass bead, plastic bead, and more. Ideal for cleaning, rust removal, or paint stripping from all types of metal parts, e.g. engine components, fittings, signs, housings, wheels, hinges. High-quality latex work gloves are firmly attached to the housing. Viewing window with applied protective film allows for optimal visibility and work safety during workpiece processing. Dust-free operation thanks to continuous seals on the lid and door frames. Sturdy storage grate enables placement of workpieces inside the cabinet. With drain opening for changing blasting media. Suction pipe for blasting media is attached at the base of the collection container. With compressed air connection on the exterior. Very large, upward-opening front hatch with gas struts for fast and easy loading and unloading. Integrated extraction system with replaceable air filter. Blasting gun without trigger – airflow is controlled by foot pedal. 4 fluorescent lights (230 Volt), in a separate housing with protective glass and replaceable protective film, including 5 replacement films. 2 separate switches for extraction and cabin lighting. Working pressure is regulated via pressure regulator with manometer. Crossbars on the support feet allow for easy transport with a pallet truck. Scope of delivery: - High-quality blasting gun with ceramic nozzle - 4 ceramic nozzles (4 / 5 / 6 / 7 mm) - Includes 5 replacement films for viewing window Technical data: Cabin volume: 825 l Air consumption: 400 – 800 l/min Working pressure: 3.4 – 8.0 bar Compressed air connection: 3/8" Guodpfxecqm Rwo Abmek Blasting media grain size: 0.42 – 0.125 mm Internal dimensions: 1160 x 870 x 850 mm External dimensions: 1180 x 900 x 1760 mm Weight: Maximum working pressure: 8.6 bar Location: Arriving in stock at 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft Minimax ST 5es – Maximum Specification for the Professional Saw-Spindle Moulder Combination with Mitre-Cutting Attachment and Tilting Spindle Moulder Art. No.: 5501086 Guodpfx Aod Hx Hmsbmok Ø 350 mm main saw blade with maximum cutting height of 118 mm, which is also achieved with the scorer blade fitted Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit tiltable from 90° to -45° High-precision format sliding table made of anodized aluminium Large outrigger (1200 x 650 mm) With material roller and extendable aluminium telescopic stop up to 3300 mm Tilting spindle moulder from 90° to -45° towards the fence Four spindle speeds With clockwise/anticlockwise spindle rotation Three independent motors With lockable main switch, motor protection switch Includes separate rip fence and separate jointer fence as standard Equipment details: Sliding table with ball contact system - Made from anodized aluminium - Guides made from hardened and ground steel, 15% harder than conventional steel Double-trunnion spindle moulder unit - Tilting, made from cast iron - Mounting points directly on the table ensure optimum smooth running - Spindle mounted high on precision ball bearings for minimal bearing load and maximum service life - Powerful industrial motors Moulder fence - Heavy-duty professional design - High-quality cast iron fence with fine adjustment as standard - 3-position for quick resetting of adjustments - Rack and pinion fine adjustment, numeric display, and aluminium fence jaws Rip fence - With fine adjustment and quick clamping - Stable round bar guide made from ground steel - Easily foldable for processing large workpieces - Reversible aluminium fence for narrow workpieces Cast iron double-trunnion saw unit - Height adjustment via dovetail guide - Extremely robust and torsion-resistant for precise cuts - Close to the saw blade, supported on both sides - Height and tiltable up to 45° - Scoring unit with separate scorer motor 0.55 kW as standard Outrigger with angle-adjustable telescopic crosscut stop - With angle indexing Dimensions and weights Weight approx. 900 kg Dust extraction connection Extraction port diameter: 3 x 120 mm Extraction port diameter blade guard: 80 mm Drive output Scorer motor: 0.55 kW Main motor: 2 x 5.0 kW Electrical data Connection voltage: 400 V Sliding table and table Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1380 mm Table width: 465 mm Spindle moulder Spindle tilt: 0 – -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Maximum milling tool diameter - Lowerable: 240 mm - Tenoning: 320 mm Circular saw unit and scorer Cutting length: 3200 mm Cutting width with rip fence: 900 mm Max. crosscutting width left of saw blade: 3300 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 104 mm Max. cutting height at 45°: 68 mm Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, 4-knife cutterhead for superior planing results Smooth operation thanks to precision unit and heavy cast iron design Front steel feed roller with helical toothing for optimal material feed Satin-finished steel outfeed roller, optionally with rubber roller outfeed The work table is mounted on four oversized columns, ensuring maximum stability under all operating conditions. Gedpfsd Hx Hnjx Abmouk Planer table height adjustment via handwheel with digital readout (accurate to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator front High-performance industrial motor Robust steel and cast iron construction Equipment Details: Work Table Mounted on four large-diameter spindles, ensuring maximum stability under all operating conditions Special lifting system maintains table position perfectly, even without locking Tersa Planer Cutterhead No setup or screwing required Knife changes completed in seconds Self-locking system Extremely quiet operation Thickness Table Adjustment for S 41 elite s Via handwheel with digital display for set planing height (accurate to 0.1 mm) Dimensions and Weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust Extraction Connection Extraction port diameter thicknessing: 120 mm Drive Performance Main motor: 5 kW Setup Information Required length: 1070 mm Required width/depth: 900 mm Required height: 1100 mm Explanation required space: Dimensions account for maximum travel or usable lengths. Machine Body Length: 1040 mm Machine Body Width/Depth: 900 mm Length: 3000 mm Width: 1600 mm Working Area Explanation: Please add stated values to required space to calculate the total recommended free installation area for the machine. Thicknessing Table Thickness table length: 423 mm Thickness table width: 775 mm Working height min.: 3 mm Working height max.: 240 mm Minimum working length: 180 mm Maximum chip removal: 5 mm Electrical Data Connection voltage: 400 V Planer Cutterhead Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 410 mm Feed Speed: 6/12 m/min

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1994, Holz Her šarnyrinė freza su Holz Her padavimo įtaisu Stalo pailginimas abiejose pusėse su ištraukiamu atmušu Verpstės posvyris: Taip, nuo -5 iki +45° Aukščio reguliavimas: rankinis Posvyrio reguliavimas: elektrinis Frezuotuvės žandų reguliavimas: rankinis Aukščio indikacija: skaitmeninė Posvyrio kampo indikacija: skaitmeninė Godpfx Aoxpm Evebmsuk Frezuotuvės atmušo indikacija: skalė Frezuotuvės verpstės skersmuo: 30 mm Sukimosi greičiai: 1500, 3000, 4500, 6000, 9000, 12000 aps./min. Variklio galia: 5 / 6 kW Variklio stabdis: taip, automatinis Ištraukimo jungtis: 2 x 120 mm Mašinos ilgis: 1950 mm Mašinos gylis: 1400 mm Svoris: apie 1100 kg Holz Her padavimo įtaisas, tipas: 1112 - 4 volai Vieta: sandėlyje, 54634 Bitburg - galima pristatyti iš karto -

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Vacuum Membrane Press The VP Series represents the optimal solution for woodworking applications. The VP 3000 is equipped with a heating system that reduces glue drying times, thus increasing productivity. Applications: - Veneering / Form gluing / Wrapping - Coating of various profiles (veneer, paper, plastic, etc.) - Wood bending: Production of curved and laminated components The heating system is fitted with temperature control. 2.5 mm rubber membrane Tabletop made of 12 mm plastic Oil-free Becker vacuum pump with a capacity of 25 m³/h Vacuum control system / tank capacity: 15 l Working area: 3000 x 1500 mm Maximum heating system temperature: 60°C Heating output: 4.5 kW Pump performance: 0.75 kW Vacuum pump capacity: 25 m³/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg Guedpfx Abedwh E Asmok The machine is equipped with a chassis for mobility. Location: Ex-stock 54634 Bitburg – Free on truck –

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, naudotas, geros būklės, mažai naudotas, puiki komplektacija Gamintojas: Panhans Tipas: 116H Pagaminimo metai: 1995 Mašinos Nr.: 640 GS – patikrinta dėl medienos dulkių Valdymas dviem svirtimis Griebtuvas 20 mm Kaiščių gręžimo įrenginys su 4 žingsniais 45° kampinis ribotuvas, reguliuojamas be pakopų Gedoxgu Uajpfx Abmjuk Perkeliama Pneumatiniai ruošinio spaustuvai – 2 vnt. Pneumatinis aukščio reguliavimas su pedalu Ištraukimo jungtis D 100 mm Reikalinga vieta apie 950 mm x 1000 mm x 1300 mm Svoris apie 200 kg Sandėliavimo vieta: 54634 Bitburg, pakrauta laisvai, neįpakuota Perdavimas tokios būklės, kokia apžiūrėta Be garantijos ir atsakomybės už kokybę

Sąlyga: geras (naudotas), Gamybos metai: 1997, Gamintojas: MABO Modelis: BABY S.A.S. BABY 80 Mašinos tipas: Briaunų šlifavimo staklės Techniniai duomenys Guedpfx Aoxgvcxebmok Volelių atstumas: 1.050 mm Didžiausias šlifavimo juostos plotis: 120 mm Greičio padėtys: 1 Pagrindinis variklis: 1,1 kW Šlifavimo juosta horizontali Šlifavimo juosta pasukama Vertikaliai į viršų Svoris apytiksliai: 95 kg Užimamas ilgis: 2,65 m Užimamas plotis: 0,55 m Užimamas aukštis: 1,1 m Vieta: sandėlyje 54634 Bitburg - galima iškart -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, MC Biesse angle aggregate HSK 63 F with 2 outputs Manual Key Collet Gusdpfxswmtaqs Abmek Location: ex stock 54634 Bitburg - immediately available -

Gamybos metai: 2005, Sąlyga: geras (naudotas), Sparnų vežimėlis su 2 x 6 skersiniais Gujdpfxexacube Abmek Skersinis vežimėlis Komplektavimo vežimėlis Judantis Ilgis: 1,1 m Skersiniai: 0,55 m Aukštis: 2 m Vieta: sandėlyje 54634 Bitburg - iš karto prieinama -

Sąlyga: naujas, Gamybos metai: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production: it delivers cleanly planed surfaces, is quick and easy to operate, and is exceptionally quiet in operation. The standard electronic control unit makes setting the planing height very simple, with 99 storable planing dimensions for perfect results from the first workpiece. The thickness table can be easily moved by pressing a button, or adjusted upwards in 0.1 mm increments. All feed speed controls are within comfortable reach. The heavy, vibration-damping composite frame combined with the high-quality cutterblock bearings ensures excellent surface results. Thanks to the sound-insulating construction, quiet operation is guaranteed even in standard configuration. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm Guodpfxeqlclbe Abmok • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Cutterblock speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; pushbuttons for manual coarse and fine adjustment of planing thickness with digital display, start/stop button for cutterblock, integrated hour counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; includes block locking for easy knife change • Thicknessing table: Electric height adjustment with fine adjustment, feed speed 10 mm/s, securely mounted on four support spindles, precision-ground table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, easy roller change; infeed sectional pressure bar • Extraction: Pivoting, split chip extraction hood with 160 mm port, can be connected left or right side (both sides possible on request); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication rail for oil-lubricated points; cutterblock and bearing lubrication via grease nipples • Accessories: 1 grease gun filled with long-life grease, 1 oil gun, 1 open-ended wrench, 1 knife-changing tool, 1 pair of blank knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emissions data: Sound pressure level at operator’s position LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 1 h, Super special price, as this machine was used during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale. Once it’s gone, it’s gone. Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, styrofoam, foam, or paper. A distinctive feature: the screw pre-compaction system ensures high briquette quality. For fast and easy installation, the C 140 is mounted on a stable base frame. Dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30–40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Gjdpfx Abjtnz Hbemsuk Container with agitator and geared motor - Screw channel with discharge auger and geared motor Accessories: - Briquette length monitoring, automatic on/off Location: 54634 Bitburg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Weima medienos smulkintuvas – stūmoklinis padavimas – tylus ir lėtai veikiantis Puiki būklė – tik 150 darbo valandų – Tipas: WL 600 Veleno skersmuo (mm): 260 Peilio ilgis (mm): 600 Peilio veleno apsukos (aps/min): 80 - 125 Peilių skaičius (vnt.): 14 Didžiausias granulių dydis (mm): 20/25 Angos dydis (mm): 600 x 800 Ištraukimo jungties skersmuo (mm): 160 Variklio galia (kW): 15 Įtampa (V): 400 Darbinis aukštis (mm): 1645 I x P x A (mm): 1.805 x 1.118 x 1.645 Svoris (kg): 1100 Vieta: sandėlyje, 54634 Bitburg - iš karto prieinama - Tarpinis pardavimas galimas Gusdpfx Aoxiq Syjbmek

Sąlyga: naujas, Gamybos metai: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made from heavily ribbed grey cast iron – ensures maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precision sliding table made from anodised aluminium – smooth operation via high-quality ball bearing system Carbide guide rails – for lasting precision and minimal maintenance Tilting grey cast iron saw unit with double segment guidance – exact zero-point tilt for utmost cutting accuracy Sturdy rip fence with round bar guide Equipped with adjustable eccentric hold-down device Gedpfsxw N Sbex Abmjuk Integrated mitre cutting device on the sliding table – for fast and precise mitre cuts Scoring unit with powerful, separately driven motor Supplied with high-quality crosscut frame – includes heavy-duty telescopic fence, integrated roller for easy loading and unloading, angled scale for comfortable reading, and practical eccentric clamp for secure workpiece holding Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weight Weight (net) approx. 670kg Extraction Connection Extraction port diameter: 120mm Extraction port diameter (saw blade guard): 80mm Electrical Data Connection voltage: 400V Mains frequency: 50Hz Scoring motor power: 0.65kW Output power (main motor): 7.0kW Main motor duty cycle (rated operation): S6 Main motor duty cycle: 40% Sliding Table and Worktable Sliding table length: 3200mm Sliding table width: 360mm Sliding table height: 175mm Table length: 1000mm Table width: 560mm Table height: 900mm Saw Unit Cutting width with rip fence: 900mm Max. crosscut width left of saw blade: 3200mm Max. crosscut length: 3200mm Saw blade tilt: 90° - 46° Max. cutting height at 90°: 136mm Max. cutting height at 45°: 97mm Note regarding max. cutting height: Independent of scorer Saw blade diameter: 400mm Note regarding saw blade diameter: Independent of scorer Saw blade speed: 3500/5000rpm Scoring Unit Scoring saw blade diameter: 120mm Scoring saw blade speed: 9200rpm Features Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscut frame Material support roller on crosscut frame Rip fence with round bar guide Stops: Two professional flip stops Crosscut shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - available immediately -

Sąlyga: naujas, Gamybos metai: 2024, EVOLUTION – Precision, ergonomics, and functionality seamlessly combined Automatic functions, such as automatic locking and pivoting, or automatic insertion and retraction of the saw unit, make your daily work significantly easier. Take advantage of the benefits offered by an EVOLUTION. Operation is via a 12" touchscreen computer. The user-friendly, intuitive interface ensures perfect processing of your orders down to the smallest detail. Comprehensive standard equipment - 12" touchscreen computer with optimal user guidance - Laser-guided display for horizontal cuts - Digital measuring system DMS-XY - Automatic saw beam locking with cut position detection - Automatic locking and pivoting of the saw unit - Automatic insertion and retraction of the saw unit - Automatic fine adjustment of the saw unit - Operating hours counter Gujdpjhf Dqbefx Abmek - Tool database - Full-length ALU center support - Integrated, high-performance TRK dust extraction. Dust emission below 1 mg/m³ - Control cabinet mounted directly on the saw frame - Supersilent sound insulation Scoring unit: VSA scorer saw, steplessly adjustable Freestanding support, complete Paper holder High-end grid made from synthetic materials Small parts support, full aluminium UPS 24 VDC for touchscreen PC (uninterruptible power supply) Saw weight approx. 1,100 kg Cutting depth 80 mm Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at workplace LpA 83 dB *3 Saw blade speed 4,800 rpm Extraction port ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 6224 6645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 6224 5300 2240 2100 Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Gsdpohkzttofx Abmsuk Brand: Holzkraft Chip Collection Volume: 2 x 165 l Outside Diameter of Extraction Port (Inlet): 160 mm Length approx.: 1,755 mm Width/Depth approx.: 830 mm Height approx.: 1,654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Mains Frequency: 50 Hz Filter Filter Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rated Airflow: 1,448 m³/h Dust Class: H3 Scope of Delivery: Metal Impeller Fan Inspection Opening for Cleaning the Bypass Filter 5 m Connection Cable with 5-pin CEE Plug and Phase Reverser Two Fixed and Two Swivel Castors with Locking Brakes Manual Filter Cleaning Item No. 5131620 Location: ex stock 54634 Bitburg - Available immediately -

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft panel saw with scorer Compact panel saw with tilting saw blade and high-quality format sliding table made of anodized aluminum - Cutting plane of the compact panel saw is directly on the rolling table - Precision-guided aluminum format sliding table, anodized as standard - Large-area table extension guided on a telescopic arm and longitudinally adjustable - Standard table extension and table widening enable effortless handling of larger workpieces - The large-dimension saw unit made of cast iron is double-mounted to the cast table and guarantees stability, precision, smooth running, and long service life Gujdpfx Ajih Dwvobmok - Large worktable made of ground cast iron, thus extremely robust and resistant - Smooth operation and precise cuts - Aluminum sliding table - Equipped with the proven ball contact system used millions of times - Dust and dirt resistant due to minimal contact point between the ball and the trapezoidal rail - 10-year HOLZKRAFT warranty on wear of the hardened guideways - Telescopic stop - Extendable aluminum telescopic stop - Angle adjustable - With two professional flip stops Parallel fence - Standard with fine adjustment and quick clamping Scope of delivery: - Table extension - Table widening - Anodized aluminum format sliding table - Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical data - Table dimensions: 1020 x 325 mm - Table height: 900 mm - Cutting length: 1660 mm - Max. cutting height at 90° with scorer: 100 mm - Max. cutting height at 45° with scorer: 79 mm - Max. crosscut width left of saw blade: 1270 mm - Cutting width with parallel fence: 900 mm - Saw blade tilt: 90° - 45° - Max. saw blade diameter with scorer: 315 mm - Max. saw blade diameter without scorer: 315 mm - Scoring blade diameter (option): 80 mm - Main saw blade speed: 4000 rpm - Scoring saw blade speed: 7600 rpm - Electrical connection: 400 V / 50 Hz - Motor power: 4.0 kW - Extraction port diameter: 120 mm - Extraction port diameter at blade guard: 60 mm - Weight: 295 kg Location: Available from stock, 54634 Bitburg - Available immediately -

Sąlyga: naujas, Gamybos metai: 2025, For sawing, milling, surface and thickness planing, as well as optional slot mortising, in the tightest of spaces - High-precision format sliding table made of anodized aluminum, various lengths available - Large extension table (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops - Max. saw blade Ø 315 mm, tiltable from 90° to -45° - Wide spindle moulder tilting range from 90° to -45° to the rear - Four spindle speeds up to 10,000 rpm, manually adjustable - With reversible spindle rotation (right/left) - Strongly ribbed, tension-free cast iron surface tables for decades of stability and flatness - 2-stage feed for thickness planing - Three independent industrial motors for continuous operation - With lockable main switch, motor protection switch - Fixed handwheels Dimensions and Weights Net weight: approx. 857 kg Surface Planer Table width: 410 mm Table length: 2000 mm Max. depth of cut: 5 mm Dust Extraction Connection diameters: 3 x 120 mm Saw blade guard extraction: 60 mm Installation Information Required length: 5960 mm Required width/depth: 5140 mm Note: Dimensions include maximum traverse paths or usable lengths. Working Area Length: 1600 mm Width/depth: 1600 mm Note: Please add the working area dimensions to the installation space to obtain the recommended free footprint for the machine. Thickness Planer Table length: 757 mm Table width: 423 mm Min. working height: 3 mm Max. working height: 230 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Motor duty type: S6 Gsdsih Dxlopfx Abmouk Motor duty cycle: 40% Motor power: 3 x 5.0 kW Sliding Table and Worktable Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm Spindle Moulder Spindle tilt: 0 – -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Maximum Cutter Diameters Max. tool diameter, retractable: 210 mm Max. tool diameter, retractable at 45°: 150 mm Max. tenoning cutter diameter: 275 mm Planer Cutterblock Cutterblock type: TERSA Cutterblock diameter: 87 mm Number of knives: 4 pcs Cutterblock speed: 5200 rpm Panel Saw Unit Crosscut length: 2600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3260 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection at 90°: 100 mm Max. saw blade projection at 45°: 71 mm (Main) saw blade diameter: 315 mm Please note: With scoring blade (Main) saw blade speed: 4000 rpm Feed Feed speed: 6 – 12 m/min Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Kombi 4-function HOLZKRAFT CU 300 Classic F 23 N -- Technical Specifications -- - Circular Saw - Cutting length: 2,250 mm Max. saw blade Ø: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of saw blade: 2,310 mm Rip capacity at parallel fence: 820 mm Saw blade tilt: 90° to -45° - Surface Planer - Working width: 300 mm Planer table length: 1,510 mm Cutterhead Ø / number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./max. working height: 3 / 230 mm Max. cutting depth: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool Ø: 275 mm Max. tool Ø: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle Ø: 30 mm - General - Gujdpfoci Tvhex Abmjk Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port Ø: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm - Special Offer Price - Location: Ex-stock 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Optimum Gear-Driven Metal Band Saw OPTIsaw SD 200V For demanding sawing tasks Article number: 3300205 DESCRIPTION - Quiet operation - Sturdy cast iron construction - Saw bow lowering infinitely adjustable via hydraulic cylinder with throttle valve - Microswitch for automatic end-of-cut shut-off - Clearly readable scale for angle adjustment - Supplied as standard with a high-quality bi-metal saw blade - Saw blade tension adjustable from the front via handwheel - Ball-bearing guided saw blade - Robust machine base with large wheels and ergonomic transport handle for easy relocation - Adjustable material stop for series production - Safety switch for saw blade cover - Fully equipped, allowing the operator to start productive work immediately after commissioning Gusdpev Sg T Nofx Abmjk TECHNICAL DATA Dimensions and Weights Length (product) approx.: 1382 mm Width without material stop approx.: 434 mm Width/depth (product) approx.: 533 mm Width with material stop approx.: 533 mm Height (product) approx.: 1200 mm Height lower end position approx.: 790 mm Height upper end position approx.: 1200 mm Weight (net) approx.: 130 kg Work table height: 530 mm Electrical Data Drive motor power: 0.75 kW Supply voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 100 W Machine Data Saw blade speed(s): 26 – 80 m/min Saw blade length: 2360 mm Saw blade width: 19 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 45° Feed: infinitely adjustable Raising of saw bow: manual Cutting Ranges Cutting capacity 0° round (solid material): 180 mm Cutting capacity 0° square (solid material): 180 mm Cutting capacity 0° rectangular upright (solid material): 180 x 240 / 50 x 300 mm Cutting capacity +45° round (solid material): 110 mm Cutting capacity +45° square (solid material): 150 mm Cutting capacity +45° rectangular upright (solid material): 110 x 170 mm SCOPE OF DELIVERY - Material stop - Bi-metal saw blade - Machine base

Sąlyga: geras (naudotas), Gamybos metai: 1986, Hoffmann Dübelfix chain mortiser with pneumatic stroke - very good condition - Pneumatic clamp Turret stop Material support Pneumatic foot pedal Gusdpfx Abevk Dqvemek Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Compact wide belt sander with combination sanding unit Special action equipment: - On/off control of the sanding pad from the operator panel - On/off control of the roller from the operator panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with pushbutton Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front Robust mono-block steel machine body with tubular reinforcement, robot-welded, aggregates mounted high for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first aggregate Rubber pressure rollers, in front of and behind each sanding unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Universally usable for solid wood and veneer, thanks to the combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite insert Universal design for calibration and sanding of solid wood, particleboard, and veneer Technical data Product length approx.: 1388 mm Product height approx.: 1668 mm Product width/depth approx.: 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V Current type: AC Gujdogf Sw Nspfx Abmsk Phase(s): 3Ph Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW Height adjustment motor power: 0.25 kW Drive motor power: 7.5kW Sanding unit Sanding belt length: 1525 mm Maximum sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Workpiece height min.: 4 mm Workpiece height max.: 170 mm

Gamybos metai: 2022, Sąlyga: naujas, XSD310 400 Volt Weight: 280 kg Surface planer Planing width: 310 mm Total length of planer tables: 1400 mm Cutterblock diameter: 70 mm Tersa cutterblock RPM: 5,500 Planer fence dimensions: 1300 x 150 mm Planer fence tilt adjustment: 90 - 45 degrees Maximum cutting depth: 4 mm Motor power: 4 HP Thickness planer Thickness table dimensions: 430 x 310 mm Gujdpfjdkl Sqsx Abmsk Thickness capacity: 230 mm Feed roller diameter: 30 mm Feed speed: 6 m/min Accessories: Tersa cutterblock Thickness table adjustment via handwheel with mechanical display Location: Available from stock 54634 Bitburg The machine is on display at our premises and is available immediately.