Korpuso presai pirkti naudotą (8)

Sąlyga: labai geros būklės (naudotas), Hess korpuso presas, tipas: Export, pneumatinis Gamintojas: Hess Tipas: Export Korpuso dydis: maks. 2.500 x 1.500 mm Spaudimo jėga: 1400 kp kiekvienam spaudimo agregatui prie 15 bar Vertikalių cilindrų kiekis: 2 + 2 spaudimo cilindrai Horizontalių cilindrų kiekis: 2 + 2 spaudimo cilindrai Matmenys: 3.900 mm x 2.500 mm x 600 mm Svoris: 1060 kg Guodpsxgvwpsfx Abmok Hess korpuso presas Export, pneumatinis 2 vertikalūs spaudimo agregatai, po 2 spaudimo cilindrus kiekviename agregate, 80 mm cilindro diametras, 110 mm cilindro eiga, 1400 kp spaudimo galia kiekvienam agregatui prie 15 bar, 2 horizontalūs spaudimo agregatai, po 2 spaudimo cilindrus kiekviename agregate, 80 mm cilindro diametras, 110 mm cilindro eiga, 1400 kp spaudimo galia kiekvienam agregatui prie 15 bar, viršutinis labai lengvai perstumiamas dėl svorio paskirstymo, Presavimo procesas valdomas dviem rotaciniais vožtuvais: spausti – stop – atleisti, Priežiūros blokas: slėgio mažinimo vožtuvas 0–15 bar, manometras, rūko alyvintuvas, anoduoto aliuminio matavimo skalės, nuimamos kojos Vieta: kliento aikštelėje Iš karto prieinama

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, LAMELLA – CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration comprising: - Stable, torsion-resistant steel frame in welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcase joints - Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick coated support plates - Continuous pressing surface with a height of 95 mm on the bottom vertical press beam - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance lead nuts with grease reservoirs - Pressing is carried out electromotorically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable via 2 potentiometers and controlled by frequency inverters, thus the pressing force regulation is absolutely wear-free - Pressing force for horizontal press beam min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for the vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Easiest operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Completely overhauled by Ganner, parts warranty 6 months Gujdew Td A Ispfx Abmek Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, LAMELLA - CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counter-pressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical press beam Gedpfx Aexvitisbmjuk - Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Pressing is performed electromotively via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is steplessly electronically adjustable via 2 potentiometers and controlled by frequency converters, making the press force regulation completely wear-free - Pressing force for horizontal press beam min. 500 daN (kg), stepless up to max. 2200 daN (kg) Pressing force for vertical press beam min. 300 daN (kg), stepless up to max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second Extremely easy operation - Working height/loading height: 300 mm - Working dimensions: length min. 150 mm, max. 2500 mm; height min. 150 mm, max. 1400 mm; depth: 700 mm Machine no. 563.624 400V, 3-phase, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Fully overhauled by Ganner, parts warranty 6 months Location: from stock 54634 Bitburg - Immediately available -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Technical Data: Lamella carcass press from our showroom; Working range: width from 150 - 2,550 mm, height from 150 - 1,400 mm; depth from 150 - 700 mm; Variable pressing force adjustment of the side press beam: 300/700/1100/1400/1800/2200 dN(kg); Variable pressing force adjustment of the top press beam: 500/800/1200/1500/1900/2200 dN(kg); Gujdjb Eln Dopfx Abmsk Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. The machine is available in our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 941, darbinio aukščio: 1 350 mm, darbinis plotis: 600 mm, darbinis ilgis: 2 500 mm, TECHNINĖS DETALĖS Presavimo ilgis: maks. 2 500 mm Presavimo aukštis: maks. 1 350 mm Darbo gylis: maks. 600 mm ĮRENGINIO DETALĖS Elektros duomenys Nominali įtampa: 3/N/PE/400 V Nominali srovė: 11 A Nominali galia: 4,7 kW Dažnis: 50 Hz KOMPLEKTACIJA Guodpoxnyg Rsfx Abmok Vertikalūs ir horizontalūs presavimo strypai juda elektromechaniškai Spaudimas formuojamas dažniu valdomais pavaros varikliais Vertikali ir horizontali prispaudimo jėga reguliuojama atskirai Presavimo laikas reguliuojamas

Sąlyga: naujas, Gamybos metai: 2025, SURFACE CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lateral pressing beam featuring a continuous pressure surface with a 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick, coated support plates - Electromotive adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance slide nuts with grease reservoir - Pressing is electromotive via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely electronically adjustable by potentiometer and regulated via frequency converter, ensuring completely wear-free press force control - Pressing force for vertical pressing beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, controlled via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the pressing beam, e.g., for low pressing forces such as drawers, etc. Gujdpfow Sgnksx Abmsk - Simple operation via 2 separate push buttons, 2 movement sequences (Open/Close) selectable from the control panel - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams - Repress function to increase or decrease pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Minimum length: 150 mm, Maximum length: 1300 mm Minimum height: 150 mm, Maximum height: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short notice

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, LAMELLA/CARCASS PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Gujdpfx Ajw Tdymsbmek Carcass joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromotorically driven by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per pressing beam. - The pressing force of the beam is electronically regulated and set via frequency inverter, ensuring completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - Simple operation via 6 separate push buttons, 6 motion sequences selectable via control unit. - Freely adjustable pressing time preset with automatic opening function 0-30 min (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - 1 selector switch for variable pressing force 1000 / 1500 / 2000 daN (kg) Machine no. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for 500 mm working height included Used machine: Year of manufacture 2013, completely overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. Gedpoiidm Nofx Abmeuk The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -