Temperatūros bandymo kamera

CTS T -70/600

Būklė: labai geros būklės (naudotas), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Nominal Voltage: 400V 3/N PE 50 Hz Nominal Power: 6.7 kW Nominal Current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display of setpoint and actual temperature values - Easy adjustment using +/- button - Digital input for temperature in °C - PLC compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-supplied test specimen sensors Shelving: Stainless steel, support surface 820 x 710 mm Maximum load per shelf: 35 kg Total load with maximum shelf configuration: 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic with stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Kwjdpfsygultsx Agfew Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate: measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Maximum heat radiation: 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Nominal power: 6.7 kW Nominal current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg Important security information for buyers! The following points are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) Further questions can be answered by phone.

Būklė: geras (naudotas), CTS Model: T-70/600/S Water-cooled temperature test chamber Refrigerant: Converted to R-452A Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific DUT control Technical Data Temperature testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, no heat radiation, Kjdsvitmdepfx Agfsww and without additional equipment. Dimensions: Test chamber volume: 600 liters Internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information! The following work is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data, specifications reserved!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel Kjdpfx Agju U Ixmofsww - Digital display of target and actual values - Numerical input of target values - Error messages in plain text - RS 232 interface - Free switching channels for external specimen control Technical Specifications Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat emission: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 8.8 kW Nominal current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information reserved!) If you have further questions, we will be happy to answer them by phone.