Pakavimo linija

CSP ENGINEERING FULLY AUTOMATIC PACKAGING LINE

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Weinig gamybos linija CONTUREX C 125, pagaminimo metai 2018. Nodpfxoy Emrke Aa Dsld

Būklė: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Nlsdohp Rcropfx Aa Ded Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Būklė: labai geros būklės (naudotas), Griggio pravažiama plataus juostos šlifuoklė Kombinuotas agregatas su batu, gumuotas kalibravimo velenas. Osciliacija su fotoelementu, elektrinis stalo pakėlimas. Nodpfxoxixxno Aa Deld Matmenys: ilgis 140 cm, plotis 100 cm, aukštis 210 cm Įrenginys labai geros būklės.

Gamybos metai: 2024, būklė: naujas, • Chopping height: 240 mm • Chopping width: 540 mm • Chopping length: approx. 25–35 mm • Number of chopping knives: 2 • Rotor diameter: 600 mm • Rotor speed: 590 rpm • Feed motors: 4 + 3 kW • Main motor: 45 kW / 55 kW / 75 kW • 6,000 mm infeed conveyor belt • 2,000 mm discharge conveyor belt under the machine Nodjnyidbopfx Aa Dsld

Gamybos metai: 2008, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10999, OPIS Dvostrana brusilica / brusilica za obradu gornje i donje strane Proizvođač: Löwer Model: DSM 3000 sa povratom obratka Bthgq0Ygu0 Radna širina: 290 mm Debljina brušenja: 2-200 mm Najkraća dužina obratka: cca 320 mm Opremljena sa: 1x brusna jedinica odozgo, 7,5 kW 1x jedinica za četkanje odozgo, 0,37 kW 1x brusna jedinica odozdo, 7,5 kW Nsdpfx Aov Dfp Hoa Dold 1x jedinica za četkanje odozdo, 0,37 kW Dimenzije brusne trake: 300 x 1800 mm Električno podešavanje visine, 0,37 kW Podesivi dovod, 6/11/16 m/min Pritisak vazduha: 6-8 bara Dimenzije cca 2700 x 1100 x 1900 mm Težina cca 1600 kg

Būklė: naujas, - NEW - Description - Sturdy steel and cast iron construction - Milling spindle tiltable from 0° to -45° towards the rear - Three spindle speeds from 3,500 to 10,000 rpm - Spindle with standard forward and reverse rotation - Large, heavy-duty milling unit made of cast iron, mounted directly to the table - Solid and precise cast iron table - Fast and easy speed change - Powerful 5.0 kW industrial motor - Standard curved milling protection hood included Equipment details Aluminium sliding carriage - Equipped with a highly proven ball contact system - Torsion-resistant, highly precise, smooth-running and reliable in daily use - 10-year Holzkraft warranty on wear of the guideways Cast iron milling unit - Directly attached to the milling table - Milling spindle runs on precision ball bearings mounted high up, ensuring minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful motors - Equipped with a high-performance three-phase motor Milling protection - For maximum safety, the milling guard is standard equipped with an adjustable height guide rail and a safety shield Milling fence - Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw - Integrated extraction connection ensures clear visibility Milling table opening - Large milling table opening also allows the use of large panel-raising cutters and tenoning/mortising tools above and below the table Curved milling protection hood - Included as standard Reversible fence jaws - Versatile integrated stop to bridge the tool gap - Enables safe operation even with narrow workpieces Technical data: Dimensions and weights Weight (Net) approx. 290 kg Dust extraction connection Extractor port diameter 2 x 120 mm Work table Work table length 1,000 mm Sliding carriage length 1,000 mm Work table width 435 mm Sliding carriage width 270 mm Table height 900 mm Installation information Required space length 1,945 mm Machine body width/depth 710 mm Required space width/depth 2,220 mm Work area length 1,600 mm Clarification required space Dimensions refer to maximum travel paths or usable lengths. Nodovwf Ucjpfx Aa Dold Work area width/depth 1,600 mm Machine body length 1,000 mm Clarification working area Please add the stated dimensions to the required space to obtain the recommended free area for setting up the machine. Electrical data Connection voltage 400 V Network frequency 50 Hz Phase(s) 3 Ph Drive motor power 5.0 kW Current type AC Milling spindle Spindle tilt 0 to -45° Spindle speeds 3,500/7,000/10,000 rpm Usable spindle length 100 mm Spindle shaft diameter 30 mm Spindle projection max. above table 130 mm Maximum milling tool diameters Max. lowerable tool diameter 180 mm Max. tenoning cutter diameter 275 mm Max. profile milling diameter 210 mm Scope of delivery Curved milling protection hood Anodized aluminium sliding carriage Telescopic mitre stop Aluminium fence jaws . 5502045

Būklė: naujas, Sliding Table Spindle Moulder HOLZKRAFT t 45c LL With table extension on both right and left sides, as well as a pull-out workpiece support ----- Technical Data ----- Table size: 1,945 x 695 mm, Max. spindle projection above table: 130 mm, Usable spindle length: 100 mm, Max. retractable cutter diameter: 180 mm, Speeds: 3,500 / 7,000 / 10,000 rpm, Motor 400 V: 6.6 HP / 5.0 kW, Extraction port diameter: 2 x 120 mm - Special Offer Price - - New display machine - Nlodpfx Asu U Rfpea Djd

Būklė: labai geros būklės (naudotas), Vertongen S320 pravažinė šlifavimo staklės Njdpfx Aeyg Dlcja Dsld Darbinis plotis 300 mm Darbinis aukštis iki 180 mm Kombinuota agregatas su batu Rankinis darbinio stalo pakėlimas ir nuleidimas Dvi padavimo greičiai: 7–14 m/min Pagrindinis variklis 5,5 kW

Būklė: geras (naudotas), Gamybos metai: 1996, abišalinis viršaus-apačios šlifavimas su šlifavimo padu ir dulkių šepečiu maks. šlifavimo plotis 300 mm maks. šlifavimo aukštis 200 mm Njdpfxjxfl Eao Aa Dold gamybos metai 1994 su CE ženklinimu

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, NUORODA: MM6319 Nljdpfjx E Aznsx Aa Ded Duonos gamyklos įranga, kurią sudaro: 1 vnt. „Damak“ kūginis tešlos formavimo įrenginys, skirtas gaminiams nuo 100 g iki 600 g. Gamintojas – „Damak Makina“. Modelis – DM CR 2000. Pagaminimo data – 2021 m. Galingumas – nuo 1200 iki 2400 gaminių per valandą. Elektros srovės reikalavimai – 415 V / 50 Hz / 3 fazės. 1 vnt. „Damak 176“ tešlos fermentavimo įrenginys su reguliuojamu fermentavimo laiku. Gamintojas – „Damak Makina“. Modelis – DM IP 176. Pagaminimo data – 2021 m. Įleidimo aukštis – 800 mm. Išleidimo aukštis – 1550 mm. Įrenginys turi nuimamus įdėklus, kad būtų lengviau valyti. 1 vnt. „Bertuetti“ tešlos formavimo įrenginys su 4 voleliais, skirtas gaminiams iki 1500 g. Gamintojas – „Bertuetti“. Modelis – SIMPLEX. Įrenginys nustojo būti naudojamas 2025 m. lapkritį ir yra geros būklės.