P2500-000104

CRIZAF

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS:* Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (L x W x H): 1,414 x 503 x 1,350 mm (without connections when using constant bypass) Weight: approx. 225–320 kg Heat transfer fluid connection: Flange DN25 PN16–40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS:* – Control and regulation unit: smart controller (7'' touch display) – Heating control via solid-state relay – Switch cabinet IP54 – Cooling managed by solenoid valve – Flow measurement based on differential pressure principle – Bypass between supply and return line with reduced cross-section – Level monitoring by magnetic float switch – Flow monitoring by measuring heating element surface temperature and flow rate – Dirt filters in cooling water inlet and in the return flow of the circulation system – Monitoring of supply temperature by electronic safety temperature limiter Kjdpfsg Ey Rfox Abksfa – External oil filler neck – Dilo fittings on internal pipe connections (except pump connections) – At 350°C: constant bypass including bellows valves – Connection for nitrogen blanketing with pressure gauge and safety valve (0.5 bar at 350°C) (option) Visit our website for more details or for different performance classes. *The unit is compliant with European directives. Other directives and standards are only considered fulfilled if stated in the order confirmation. This technical specification represents the standard equipment; customer requirements deviating from the standard will be shown in quotations and/or order confirmations.*

Gamybos metai: 2018, Sąlyga: naudotas, Fully operational Spanish (RECALOR) sawdust dryer. Chip output at dryer outlet: approx. 12,000 kg/h (10% moisture content, wet basis). Kfsdpfjv Rfuvox Abkja For sale due to replacement with a more efficient system.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Kaeser screw compressors – various models Kfedpfeqcu Rcjx Abkja

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, padavimo eiga Y ašimi: 6 000 mm, Tipper tray for logs up to 6 m in length. Available from September 2024. Kodpfsr Iig Djx Abkefa

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 Kjdpfxeiuznuo Abksfa SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Sąlyga: naudotas, Mechanical nailer by Wursten & Dietz. Prepared for nailing ice skates. The machine is being sold as is. Kjdpfx Abolvripekofa

Sąlyga: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen Kfsdpfx Asg Ezarobkea - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Sąlyga: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Aprašymas: Pilnai automatinė maišų svėrimo ir pakavimo linija, skirta laisvai tekantiems granuliuotiems ar kristaliniams produktams, tokiems kaip trąšos. Liniją sudaro: Automatinės grynos masės svarstyklės NET/G - CBC svėrimo sistema - Gravitacinė žaliavos padavimo sistema - Produktą liečiančios dalys iš nerūdijančio plieno (AISI 316) - Elektroninis mikroprocesorinis valdymas su LED ekranu - Pneumatinis srauto reguliavimas - Dulkių nutraukimo jungtis - Skirta 25, 40 ir 50 kg maišams Automatinė maišų formavimo-pakavimo mašina FFS-E 900 - Formuoja ir sandarina polietileninius (PE) maišus iš rankovinio rulono - Iki 900 maišų/val. (priklauso nuo produkto) - Dvigubos sandarinimo stotys (apačia ir viršus) - Maišo ilgio kontrolė naudojant enkoderį ir fotoelementą - Vibracinis įtaisas produkto nusėdimui - Siemens PLC valdymas, operatoriaus terminalas TP177B - Konstrukcija iš nerūdijančio plieno ir atspari korozijai - Komplektuojama su transporteriais ir apsauginėmis grotelėmis Tinka: Granuliuotoms trąšoms, karbamidui, kristalinėms cheminėms medžiagoms, dervoms, druskai ir kitiems laisvai tekantiems biriems produktams. Rakatiniai žodžiai: Kodpfewqfadex Abkofa concetti, net/g, ffs-e 900, automatinė pakavimo mašina, pakavimo linija, formavimo-pildymo-sandarinimo (FFS) maišų sistema, polietileno pakavimas, naudota pakavimo įranga, grynos masės svarstyklės, pramoninė pakavimo linija, laisvai tekantys produktai, trąšų pakavimas, granuliuotos medžiagos, kristaliniai produktai, maišų pildymas, atviro viršaus maišų pildymo mašina, ruloninį maišų pildymo įrenginys, palečių linija, PE maišų įrenginys, AISI 316, nerūdijančio plieno pakavimo sistemos, Siemens PLC, automatizuota pakavimo sistema, maišų formavimo mašina, trąšų linija, karbamido pakavimas, pakavimas su sandarinimu, pramoninė automatika, CE žyma, naudota pakuotės įranga, sunkiems darbams skirta maišų pakavimo sistema, birių medžiagų pakavimo įrenginys, tikslaus svėrimo sistema, dozavimo sistema, maišų uždarymo įrenginys, automatinio pildymo sistema, eurodrive varikliai, modulinė pakavimo sprendimas, pakavimo ir sandarinimo sistema.

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm Kfjdpfxjrigxyo Abkoa - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Sąlyga: paruoštas naudoti (naudotas), An air-conditioned office and commercial container by Aztech is available. U-value: approx. 0.38W-0.46W/m²K, floor load capacity: approx. 100kg/m², internal height: approx. 2500mm, external dimensions (L/W/H): approx. 3000mm/3000mm/2600mm, weight: approx. 800kg. Documentation available. On-site inspection possible. Kodew D Eubepfx Abkofa