Comacchio CH 450

Comacchio CH 450

Būklė: naujas, Gamybos metai: 2018, Sandėlio numeris: 100239478 Tedpezkz Injfx An Hoc Transportavimo matmenys (ilgis x plotis x aukštis): 0 x 0 x 0 ---- Įranga: Pagrindinė įranga: 1b) Pagrindinė versija su 27,0 m iškyša 2c) Nuotolinio valdymo pultas 2d) Mažas valdymo pultas 3a) Komplektas su piramidėmis 7) Elektros kolektorius nuolatiniam sukimuisi 8) Padėties nustatymo režimas „MICROMOVE“ 9) Liejamas balastas su 4 betoniniais balastais po 910 kg Vieta: Regensburgas

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Tsdsuz If Nspfx An Hjc Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Gamybos metai: 2007, būklė: geras (naudotas), Naudotas 4,4 kW Bystronic Byspeed CNC lazeris pardavimui Naudoti Bystronic 4,4 kW lazeriai pardavimui VIDEO ŽEMIAU: Byspeed 3015 4,4 kW Pagaminimo metai: 2007 Gamintojas: Bystronic Modelis: Byspeed 3015 Lakšto dydis: 3 metrai x 1,5 metro / 3000 mm x 1500 mm Lazerio galia: 4,4 kW / 4400 W Valdymas: ByVision CNC02 Automatika: netaikoma Metai: 2007 Būklė: gera, dirba tvarkingai, prižiūrėtas nuo naujo Byspeed 3015 4400 W 2010 m. kovas Darbo valandos: 44 189 val. Pjovimo valandos: 20 490 val. Geros būklės įrenginys, nuo naujo aptarnautas Bystronic UK paslaugų sutartimi. Komplekte: - Bypos automatinis fokusavimas - CutControl - 2 pjovimo galvos - Įrankiai ir priedai - Torit dulkių surinktuvu Tjdegwa Swjpfx An Hoc Pristatymas, montavimas ir apmokymai galimi už papildomą mokestį.

Būklė: naudotas, Techninės detalės: Sukimosi skersmuo virš staklių lovos: 3800 mm Sukimosi skersmuo virš atramos: 3200 mm Sukimosi ilgis: 12000 mm Veidrodžio sukimosi greičio diapazonas – be pakopų: 2 - 200 aps./min Didžiausias ruošinio svoris: 90 000 kg Todpfx Ansx Ngzye Hoc Staklių lovos plotis: 4000 mm Su 2 lunetėmis.

Būklė: naujas, tuščias svoris: 15 420 kg, didžiausias leistinas svoris: 61 080 kg, bendras svoris: 76 500 kg, ašių konfigūracija: > 3 ašys, krovimo vietos ilgis: 8 600 mm, krovinių skyriaus plotis: 2 540 mm, krovos erdvės aukštis: 900 mm, padangos dydis: 235/75/r17,5, spalva: pilkas, Įranga: ABS,

Gamybos metai: 2010, veikimo valandos: 9 500 h, būklė: naudotas, Purpose of use: Construction For more information, please contact Mohamad Fattah Ahmad. Year of manufacture: 2010 Operating hours: 9,500 Uppercarriage: BAUER BT 45 Attachments: Vibrator MR 70 V (completely overhauled), Pre-drilling drive ABI MDBA 3500 Usable mast length: 14 meters Engine: CAT 313 kW Auxiliary winch Tedpfsh Tyzmox An Hoc Air conditioning Very good condition

Būklė: naudotas, Strip Processing Line – Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm – Very well-equipped, with introduction aids Space requirement for complete line (L x W): approx. 7000 x 3000 mm Total weight of the line: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, maximum pass: max. 455 mm Strip thickness at 400 mm width (steel): max. 1.5 mm Strip thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of feed rollers: 2 pcs Feed roller diameter: Ø 80 mm Entry/throughput height: 1500 mm – Straightening rollers hardened, ground, and hard-chromed, with central support – Feed rollers hardened, ground, and hard-chromed, with hydraulic lift – Manual straightening roller adjustment – Introduction aid with hydraulically extendable tongue and hydraulically adjustable deflector roller – Adjustable lateral strip guide – All straightening rollers driven via distributor gearbox with cardan shafts – Both feed rollers driven via gearbox with cardan shafts – Frequency-controlled drive via geared motors – Straightening machine opening stroke 250 mm for system cleaning or feeding thicker material, lifting movement via trapezoidal thread spindle – Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with loading saddle) Coil outside diameter: max. 2000 mm (without loading saddle) Diameter of coil support disc: Ø 1700 mm Coil inside diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Width of expansion jaws: 750 mm Height of decoiler drum above base plate: 1500 mm – Decoiler drum drive via hydraulic motor and gear – Pneumatic overrun brake on decoiler drum (TWINFLEX) – Hydraulic expansion of decoiler drum, centrally via wedge slide system – Hydraulic pressure arm with hydraulically powered double pivoting roller – Coil loading saddle with 12 t lifting capacity and 300 mm lift – Decoiler in above-floor frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Unit (separate) Tank capacity: 350 liters Todpfx Aoif Sg Sen Hsc Drive power: 18.5 kW – Drive motor with 2 REXROTH pumps (tandem pump) – Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Control Cabinet (separate) – All cable connections plug-in via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Būklė: geras (naudotas), Centrinis asfaltbetonio gamyklos bokštas su sietu, maišykle, kaušiniais keltuvais... Našumas 160 tonų/val. Tsdpoy Hf Duefx An Hsc

Būklė: naudotas, ašių konfigūracija: > 3 ašys, pirmoji registracija: 10/2006, bendras plotis: 2 850 mm, pakaba: kitas, padangos dydis: 285/70R19.5, spalva: juodas, Gamybos metai: 2006, Įranga: ABS,

Būklė: labai geros būklės (naudotas), bendras svoris: 19 500 kg, grandinės būklė: 95 procentas, Gamybos metai: 2024, veikimo valandos: 615 h, Įranga: oro kondicionavimas, „Komatsu D61 PX-24E0“ Pagaminimo metai: 2024 Darbo valandos: 615 val. Uždara kabina Oro kondicionierius Tsdozr Epxjpfx An Hsc Radijas Atgalinio vaizdo kamera Vikšrų būklė: 95 % Grandinės plokštės, 850 mm pločio PAT apsauga Riedžių vožtuvas CE / EPA sertifikatas Transportavimo matmenys: 5,5 x 3 x 3,15 m Darbinis svoris: 19,5 tonos