CNC medžio apdirbimo centras

CMS Avant

Sąlyga: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastics, and aluminum. Machine in gantry design, with rack and pinion drive. Most recently used for timber staircase production. Year of manufacture: 1999 // RETROFIT in 2019 Technical Details: CNC control BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB port, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups) Working areas in 3-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups) A-axis 540° (rotary axis), B-axis 196° (swivel axis, +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min, Z-axis 15 m/min, A-/B-axis 10,000 °/min Milling unit: - 1 universal unit for 5-axis milling with 50° angled head, max. output 12.5 kW, variable speed up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool changer system. - 2 chain tool magazines, each with 32 slots for tools up to D = 90 mm, with sorted storage up to max. 160 mm (requires three slots for this). Machine table: - 10 support tubes on linear guides with pneumatic release mechanism for quick positioning. - 2 control circuits for stops “raise / lower” Lodpevmpx Refx Ah Tohp - 2 control circuits for pneumatics “clamp / release” - 2 vacuum control circuits with pushbutton for clamping and automatic reset via CNC programming. - 2 step separation devices, stroke approx. 320 mm. - Various clamping fixtures for posts and winding strings. - 1 integrated chip conveyor in the base frame, for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for rapid vacuum buildup. - Approx. 20 vacuum supports with various suction plates. - 4 stops raise/lower for positioning workpieces. Other features: - Automatic central lubrication. - Control cabinet with climate control. - Projection laser. Work safety: - Moving protective cabin with safety bumpers. Refurbishments / Repairs in 2018 / 2019: - Conversion of rotary and swivel axes to a new generation of drives (digital). - New energy chains on Y- / X- / Z-axis. - Complete rewiring; all power and measuring cables renewed. - All linear guide carriages replaced. - Z-axis ball screw and guide rails new. - X-axis guide rail new. - Control system upgrade to BWO Vektor 921, with V-CNC card and 256 MB NC memory. - Vacuum valves and hoses replaced. - 2 x tool magazines + tool grippers overhauled. - Swivel extraction system overhauled. Software: - It is possible to take over a current version of the Compass stair construction software. Compass is the leading provider for the planning and manufacturing of wooden staircases.

Sąlyga: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining center for 5-axis machining, ideal for aluminum processing and mold making. • MAKA ECM 27 R in gantry design. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 900C, memory 1 MB, integrated PC. • Portable control panel BWO RC 910. Technical data: Working areas / Working cube: with tool length 130 mm and diameter 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 40 m/min. Z-axis: 15 m/min. A/B-axis: 10,000 °/min. 1 pcs milling spindle 11 kW, Lhodjt Dl U Ejpfx Ah Top Speed infinitely variable from 2,000 – 17,000 rpm, With ceramic bearings, liquid cooling. Tool holder SK 40 with automatic tool changer. 1 pcs chain tool magazine for 12 tools up to 160 mm diameter, of which 2 stations for angle drilling head (fixed location coded), SK 40. 1 pcs steel flat table 3,000 x 2,250 mm with T-slots. 1 pcs vacuum pump approx. 140 m³/h, with 250 liter tank. 1 pcs vacuum clamping circuit. Work safety: With protective enclosure for the rear of the machine, side access door, the enclosure is open at the top. Lamella curtain on operator side and safety bumper at table front. Repairs / components renewed before delivery: - Maintenance. Electrical requirements: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Nominal power: 22.5 kW Use of a residual current device (RCD) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h Scope of delivery does not include tool holders or machining tools. Used machine, sold as is, without any guarantee or warranty. Optional: Including installation and commissioning with production-ready handover!

Sąlyga: geras (naudotas), Gamybos metai: 2005, Used Machine MAKA PE 70 5-Axis CNC Machining Center for processing wood and plastics. Gantry-type machine with rack and pinion drive. Year of manufacture: 2005 Technical Data: CNC Control BWO 920 for 5-axis processing. 10.4" LCD display 2 MB NC memory, movable control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,500 mm Lhodpfx Asvr A A Tsh Tsp X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm construction height (top edge of vacuum cup) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm construction height (top edge of vacuum cup) A-Axis 540° (rotary axis), B-Axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y: 45 m/min. Z-axis: 24 m/min. A-/B-Axis: 10 m/min. Milling Unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1), 10 kW (S6), infinitely variable speed up to 22,000 rpm, HSK-F63 milling spindle, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool Magazine: - HSK-F63 tool interface for automatic tool changing system. - 1 drum magazine, horizontal, with 20 slots for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three slots required for this). Machine Table: - 10 support rails on linear guides with pneumatic release for quick positioning. - 2 x control circuits for stops "raise / lower" - 2 x control circuits for sliding rail "raise / lower" - 2 x control circuits for pneumatics "clamp / release" - 2 x vacuum circuits with buttons for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated into the base frame, for removing chips and small offcuts up to max. approx. 100 x 100 x 100 mm. Vacuum Supply: - Machine equipped with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with tank. - Vacuum supports with various suction pads. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. Occupational Safety: - Moving protective cabin with safety bumpers on operator side. Repairs / Maintenance prior to delivery: - Maintenance newly performed. - Lamella curtain on gantry replaced. - Sliding window replaced. - Energy chain Y-axis replaced. - Energy chain Z-axis replaced. - Various cables and air hoses renewed.

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Used machine MAKA PM 270 R 5-axis CNC machining center for processing wood, plastic, and aluminum. Machine with gantry design, equipped with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC Control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis operation, with tool diameter 60 mm / tool length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with fixture height 180 mm (vacuum cups) Working areas in 3-axis operation, with tool diameter 60 mm / tool length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with fixture height 180 mm (vacuum cups) A-axis 540° (rotary axis) B-axis 200° (swivel axis +/- 100°) Ledpfx Asvmywqjh Tshp Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling, with a 50° inclined head, max. power 12.5 kW, continuously adjustable speed up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool changer system. - 1 chain tool magazine with 32 positions for tools up to D = 90 mm, with sorted storage up to max. 160 mm (for which three positions are required). Machine table: - 10 support tubes on linear guides with pneumatic quick-release system for fast positioning. - 2 control circuits for stops "Raise / Lower" - 2 control circuits for sliding rail "Raise / Lower" - 2 control circuits for pneumatic "Clamp / Release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 integrated chip conveyor in the machine base for removal of chips and small waste up to approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! By arrangement, the system can be supplied including various tool holders. We would be pleased to provide you with a separate quotation for this. Vacuum supply: - 1 pc. vacuum pump, approx. 140 m³ suction capacity, including tank with 250 liter capacity for rapid vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Stops “raise / lower” for positioning components. Miscellaneous: - Automatic central lubrication system. - Control cabinet with air conditioning unit. - Projection laser Occupational safety: - Traveling safety cabin with safety bumpers on the operator side.

Sąlyga: geras (naudotas), Gamybos metai: 2000, Maka MM 7 T / 5 axes, Year of manufacture: 2000, Control: Siemens 840 D, Travel X/Y/Z: 2x1500/2000/600 mm, Gantry milling machine for light machining, Milling spindle: 7.5 kW, NC milling head A axis: 540°, B axis: +/- 100°, Tool changer with 10 positions, HSK F 63 tool holder, Saw blade diameter max. 170 mm, Spindle speed up to 24,000 rpm, X/Y axis: rack and pinion drive, Lhedewuy Ahjpfx Ah Top Z axis: ball screw, Vacuum table, Aluminium flat table,

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Hauptantrieb Achsenanzahl: 5 Zusätzliche Ausstattung Energieketten: verschiedene Ausführungen Ljdpfx Aswpyc Rjh Tehp Dieses 5-Achs MAKA FPM 470 CNC-Holzbearbeitungszentrum wurde 1999 hergestellt. Es ist ideal für komplexe Holzbearbeitungsprojekte und bietet Präzision sowie Vielseitigkeit. Wenn Sie auf der Suche nach hochwertigen Fräskapazitäten sind, empfehlen wir die zum Verkauf stehende MAKA FPM 470 Maschine. Kontaktieren Sie uns gerne für weitere Informationen zu dieser Maschine. Einsatzbereiche CNC-Holzbearbeitung

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 2000mm/1000mm/650mm, Axes: 5, Spindle power: 10kW, Speed: 27,000 rpm, Control: Siemens Sinumerik 840 DSL, Weight: approx. 7,000kg. An on-site inspection is possible. Lhjdpougmxiefx Ah Tep

Sąlyga: naudotas, Gamybos metai: 2005, 5-AXIS MACHINING CENTER BALESTRINI MOD. IDEA GRANDE – CE COMPLIANT – USED - Axis travels: X 1600 mm Y 3000 mm Z 700 mm A unlimited C 400° - Maximum workpiece dimensions on two tables simultaneously: 2800 x 1100 x 700 mm - Maximum workpiece dimensions on one table in pendulum mode: 1300 x 1100 x 700 mm - LS 44 head with 4 x 7.5 kW Colombo air-cooled electrospindles - 18,000 rpm - 2 Becker vacuum pumps, 100 m³/h each - NUM CNC control - Alphacam USB dongle - Enclosure/cab - Year 2005 Lhjdpfx Aswrb S Esh Tep