Šveicariško tipo tekinimo staklės

Citizen Cincom L20E-2M8

Sąlyga: naudotas, TECHNICAL DATA - Number of Axles: 4 MILLING SPINDLE - Tool Holder: BT30 - Spindle Drive Power: 6.7 kW Djdpevt Eifjfx Admjwf - Spindle Speed: 10,000 rpm LINEAR AXES - Travel X/Y/Z Axes: 700 x 400 x 300 mm - Rapid Traverse Speed (X/Y/Z): 50 / 50 / 56 m/min - Feed Rate (X/Y/Z): 1 - 30 m/min - Distance from Table to Spindle Nose: 330 - 630 mm TOOL CHANGER - Tool Changer Type: Umbrella - Number of Tools in Magazine: 21 - Tool Change Time: 0.8 sec TABLE - Table Size: 800 x 400 mm - Max. Table Load: 250 kg ELECTRICAL SUPPLY - Supply Voltage: 220 V - Total Power Consumption: 9.5 kVA WEIGHT AND DIMENSIONS - Footprint: 2,050 x 2,220 mm - Machine Height: 2,497 mm - Machine Weight: 2,400 kg ACCESSORIES - Controller: Brother CNC-C00 - Interface: Ethernet / USB - Electronic Handwheel - Rotary Table: 4th CNC axis integrated * Coolant Tank * with High-Pressure Pump - Internal Coolant Supply (IKZ) - Electrical Transformer

Gamybos metai: 2007, Sąlyga: naudotas, Wheel diameter - max. 400 mm Wheel width - mm Module - max. - Dwodpfsgr Harjx Admef Workpiece diameter 36-300/400 mm Centre distance 135-290 mm Spindle speeds - stepless up to 3000 rpm Centre distance between tips 100-550 mm Control system Machine weight approx. 4,000 kg Required floor space approx. 2000 x 3055 x 2788 mm Control system: CNC Siemens 840 D Testing methods: - Single-flank rolling test - Double-flank rolling test - Structure-borne noise test - Heli test in double-flank contact Features: - Use of up to 6 test slides - Maximum testing precision and repeatability - Machine table with workpiece drive - Swivelling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, Maks. tvirtinimo skersmuo: 20 mm, maks. ruošinio ilgis: 205 mm (GB tipas), 45 mm (NGB tipas), paėmimo veleno skersmuo: 20 mm, paėmimo veleno pratekėjimo skylė: 21 mm, maks. paėmimo veleno apsukos: 9000/min, pagrindinio veleno variklio galia: 2,2 kW (nepertraukiamai)/3,7 kW (10 min. / 25% ED), paėmimo veleno variklio galia: 0,55 kW (nepertraukiamai)/1,1 kW (15 min. / 40% ED), pavaromų įrankių talpa: maks. 6000/min, įrankio variklio galia: 1 kW (nepertraukiamai)/1,2 kW (5 min. / 30% ED), valdymas: Fanuc 0i-TD, prijungimo galia: 3,74 kVA, triukšmo lygis: 74 dB(A), ilgis: 2070 mm, plotis: 1177 mm, aukštis: 1760 mm, svoris: 1700 kg. Su strypų padavėju iki 3200 mm ilgio strypams ir automatiniu strypų padavimo žurnalu strypams, kurių skersmuo: 2–20 mm. Galima apžiūrėti vietoje. Djdpfx Adew U T Tromowf

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 5 650 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS Bar Loader Fanuc 31iB – 5,646 operating hours Country of Manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub-spindle Dwjdpfx Adskhnqgomsf Maximum bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Tool set 2 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm End unit Number of positions: 4 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Subsequent machining Number of positions: 6 Number of driven positions: 6 Speed of driven tools: 8,000 rpm Electrical supply Mains voltage: 400 V All technical specifications are provided subject to errors and omissions.

Sąlyga: geras (naudotas), Gamybos metai: 2012, CNC sliding headstock automatic lathe Make: CITIZEN Model: A32 VII CL Year of manufacture: 2012 with: Mitsubishi Meldas control system synchronous spindle Dsdpfx Aowntc Usdmswf driven tools subsequent (back) machining high-pressure pump oil mist extraction system fire extinguishing system bar feeder magazine IEMCA BOSS

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters Dodjul Efmjpfx Admowf - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Tornos Multiswiss 6x32 Year of manufacture: 2018 Dodpfx Adowf I Rzjmjwf Operating hours: 14,100 h Including various accessories

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2013, veikimo valandos: 1 265 h, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 20 000 aps./min, tekėjimo skersmuo: 4 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Citizen R serisi otomatik torna tezgahları, küçük çaplı iş parçalarının işlenmesine yönelik olarak tasarlanmıştır. Bu makine çok az kullanılmıştır (yalnızca 15.800 parça işlenmiştir). Üretim yılı 2013. Dsdpovtancofx Admowf ASP-04 çubuk sürücü ile birlikte verilmektedir. Satış Türkiye dışına gerçekleşirse KDV alınmaz.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] Djdpeuhazgjfx Admjwf - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of live tool positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Sąlyga: naujas, Gamybos metai: 2025, veleno greitis (maks.): 8 000 aps./min, veleno greitis (min.): 8 000 aps./min, 1 Mehrspindel-Drehautomat TORNOS SAS16-DC im Überholungsprozess - Neuer Schaltschrank SIEMENS oder FANUC, zur Auswahl - Pick-up mit Bremse - Verstellbarer Anschlag mit Gegenlauf - 3 unabhängige Vorschubsysteme - Verschiedene Werkzeughalter und Bohrvorrichtungen - Trommelstange mit Auflage - Optionen: Automatischer Stangenlader IEMCA PRA, numerisches Gewindeschneiden, CNC-Querschlitten etc. Dsdpfx Adougl S Iemswf Kontaktieren Sie uns.