Automatinis tekinimo staklės

CITIZEN B12

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE Kjdpfxeuhaw Ie Aggjdu - Max. bar diameter: 12 mm - Max. machinable length: 135 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12 mm - Travel (Z-axis): 120 mm - Spindle speed: 7,000 rpm BUSHING HOLDER 1 - Number of positions: 5 FRONT TOOL POST - Number of positions: 3 BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V DIMENSIONS AND WEIGHT - Footprint: 1,500 x 770 mm - Machine weight: 1,400 kg ACCESSORIES - Control: Fanuc - 3-color status lamp - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Electrical transformer

Būklė: naudotas, Gamybos metai: 2008, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse on X-Y-Z axes: X/Z: 30 m/min / Y: 12 m/min C-axis rapid traverse speed: 1000 rpm Tool turret - number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical system - voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions (LxWxH) approx.: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions (LxWxH): approx. 2.9 x 0.6 x 0.55 (0.38 t) m Chip tray dimensions (LxWxH): approx. 1.6 x 1.3 x 0.25 (0.2 t) m Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features C-axis, E-axis, Y-axis, and W-axis. Driven tools possible in all turret stations. Kdjdpevvtpxefx Aggeu Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooling unit Including hinged belt chip conveyor Chip tray Compressed air gun Note: The machine is offered WITHOUT any chucks as shown!

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 Kdedpfxjuhav Ds Aggsu - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travels: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Movement of Motor Spindle – Axis B Angular travel: -15 to 100° Angular travel (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 min⁻¹ Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Rated torque: 100%: 8 Nm 25%: 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar Capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 min⁻¹ Drive torque: Rated: 112 Nm Maximum: 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Kdsdpewv Hnmjfx Aggju Rotation speed: 60 min⁻¹ Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Secondary Slide Travel: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting movement: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear stroke per motor rotation: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical stroke: 150 mm Part handling Ø / length: Ø 32 mm / 100 mm Part ejection Ø / length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Gripping force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank capacity: 80 liters Chip tray capacity: 30 liters Kinematic viscosity in operation: 10 – 15 cST SCOPE OF DELIVERY Includes (list not exhaustive): - Willemin Macodel W 408 B machining center - Extraction unit - Fire extinguishing system - Probe - Coolant unit - Oil cooler - Data backup - Complete operating documentation - Exact scope of delivery as per photo documentation No liability is assumed for the accuracy, completeness or currency of the information provided.

Būklė: geras (naudotas), Gamybos metai: 1997, Available also in CONQUEST T51 model. The used HARDINGE CONQUEST T42L CNC 3-axis lathe is a robust and precise medium-sized slant-bed CNC lathe, with an approximate turning length of 700 mm, bar capacity of 42 mm, 12-station automatic turret with live tooling, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer. Spindle ASA 5” Max spindle speed: 4,200 rpm Continuous C axis Spindle power: 20 HP X axis travel: 172 mm Z axis travel: 575 mm Machine weight: 4,000 kg Kdodpovtrc Ssfx Aggsu Complete with 210 mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 live toolholders (1 axial and 1 radial), chip conveyor, set of fixed and manual toolholders, and backup disk. Year of construction: 1997. Machine compliant with “CE” standards, in excellent condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, veikimo valandos: 4 500 h, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 090119, Country of Manufacture: CE - Germany Voltage: 400V Net Weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h, Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary position: 0.0001 – 360° C1/C2-axis rotary position: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum workpiece weight: 5 kg TURRET HEAD Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Max. turret head movement above tool tip: 500 mm Rotating tool speed: 1–9,000 rpm SPINDLE Maximum spindle speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR MACHINING Maximum bar length (bar feeder): 1,000 mm Maximum workpiece size for bar gripper: Ø42 x 100 mm Maximum gripper diameter: 42 mm Clamping cylinder tensile and compressive force: 20,000 N FEED Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse X/Y/Z axes: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Performance Values) Chip conveyor immersion pump output: approx. 10 l/min at 4.5 bar / 80 l/min at 3.2 bar / 150 l/min at 0.7 bar Kdedpfxjht Hg Dj Aggju High-pressure pump output in conveyor: 10 l/min at 13.2 bar / 50 l/min at 9 bar / 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING PRECISION Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum run-out error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return stroke: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Circulating pump (cooling unit): 1.1 kW Cooling unit compressor: 2.2 kW Chip ejector: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Operating voltage: 400 V Mains frequency: 50 Hz (60 Hz optional) Control voltage: 24V DC Total power: 35 kW Rated current: 63A Connection: Network TM / TT / IT PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 as per Pneurop 6611 NOISE EMISSIONS Normal operation: 78—80 dB Technical data subject to change or error, information provided without obligation. Inventory No. 2321018, Machine consisting of: - Chip conveyor - Preparation for bar feeder Tool holders: 6 fixed drill holders ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), Parduodama CNC trumpa tekinimo staklės Emco. Eigos kelias X/Z: 100mm/300mm, didžiausias tekėjimo skersmuo: 85mm, didžiausias apsisukimų skersmuo: 250mm, maksimali tekinimo ilgis: 255mm, tarpcentrė: 405mm, didžiausias strypo praleidimas: 25,5mm, veleno anga: 30mm, sūkių dažnis: 6300aps./min, įrankių vietos: 12, įrankių laikiklis: VDI16, greitas poslinkis: 15m/min. Staklių matmenys X/Y/Z: apie 1700mm/1300mm/1850mm, svoris: apie 1400kg, valdymas: Siemens Sinumerik 810D, darbo valandos: apie 27000h, veleno darbo valandos: apie 11000h. Komplekte strypų padavėjas. Velenas buvo pakeistas 2021 m., esant apie 25000 darbo valandų. Yra dokumentacija. Galima apžiūra vietoje. Kjdozhnt Sopfx Aggjdu

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6114676, Kilmės šalis: Šveicarija Įtampa: 380 / 50 / 3 Grynasis svoris: 180 kg Matmenys: 850/620/1600 mm Įrengtoji galia: 0,7 kVA Muitinės pozicija: 8460.3930 TECHNINĖS CHARAKTERISTIKOS Kdodpfxsw T S Tbo Aggju IŠANKSTINIO IR BAIGIAMOJO GALANDIMO AKMUO SU DVIEMIS KAMEROMIS: (KARBI DANGA) - abrazyvas: deimantas - skersmuo: 175 mm - kiaurymė: 20 mm Veleno greitis: 2500 aps./min Pjovimo greitis: 23 m/sek Veleno guolis: tikslus slydimo guolis Mikrometrinis apdirbamos detalės pritraukimas naudojant smulkią sraigtinę velenėlę, padalijimas: 0,01 mm Nuolydžio ir atstūmimo kampo reguliavimas: maks. 26° ĮRANKIŲ LAIKIKLIŲ APKABINIMO GALIMYBĖS: - prizminio korpuso įrankiai: maks. 40x40 mm - cilindrinio korpuso įrankiai: maks. 16 mm - apskritos formos pjovimo įrankiai: maks. 85 mm VARIKLIŲ GALIA: - pavaros variklis: 0,55 kVA - siurblio variklis: 0,1 kVA Aušinimo skysčio talpyklos talpa: 10 l Visi techniniai duomenys pateikiami be įsipareigojimų, galimos klaidos ar praleidimai.

Būklė: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Įranga: sūkių greitis be galo kintamas, Citizen C16-VII CNC Swiss-type Lathe Year of manufacture: 2004 Control: Mitsubishi Meldas 635 Max machining diameter: 16mm C-axis: Main and sub spindle 5 controllable servo axes: X1/Z1/Y1/X2/Z3 4 driven tools on the vertical holder C-axis: Main and sub spindle Including accessories: LNS Express 220 bar feeder, conversion kit for 16mm and 10mm Donaldson Torit extraction system Chip conveyor - Immediately available - Kdsdsv Rhd Hopfx Aggju

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: R14507, 2008 metų su Fanuc 18i-TB Su LNS Tryton 107 Gamybos šalis: JP Įtampa: 200V 3ph 50/60Hz Išmatavimai: 141x56x140 cm Grynas svoris: 950 kg TECHNINĖS CHARAKTERISTIKOS (standartinės) Ašių skaičius: 6 Velenų skaičius: 2 Pagrindinis velenas Maks. strypo skersmuo: Ø 7 mm Maks. apdirbimo ilgis: 40 mm Eiga: 40 mm Veleno greitis: 16000 min-1 Veleno galia: 1,1 kW C ašies indekso tikslumas: 0.0001° Priešinis velenas Maks. strypo skersmuo: 7 mm Veleno greitis: 10000 min-1 Galia: 0,5 kW C ašies indekso tikslumas: 1° 1-asis griebtuvas Pozicijų skaičius: 5 Kedpfx Ajya Aq Roggedu Varomų pozicijų skaičius: 2 Sukamųjų įrankių greitis: 8000 min-1 2-asis griebtuvas Pozicijų skaičius: 3 Galinio apdirbimo įrenginys Pozicijų skaičius: 3 Priešoperacija Pozicijų skaičius: 3 Kilpos klaidos ar praleidimai galimi, techninė informacija pateikiama be įsipareigojimų.