Temperatūros valdymo įrenginiai

CHURCHILL-ISITAN CH220X2

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11647, Rotor knife rows: 3 Stator knife rows: 2 Rotor width: 280 mm Rotor diameter: 280 mm Crjdpfeghgqzsx Admsk Feed opening dimensions: 300 x 300 mm

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 275 t, injection weight: 455 g, cylinder diameter: 55 mm, max. opening stroke: 850 mm, weight: 20 t, operating hours: approx. 63,000 h, including documentation, one set of new pumps and GEIGER LR 16 EC handling unit; the handling unit should be overhauled. Codsiiv Aqspfx Admork

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS:* Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (L x W x H): 1,414 x 503 x 1,350 mm (without connections when using constant bypass) Weight: approx. 225–320 kg Heat transfer fluid connection: Flange DN25 PN16–40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS:* – Control and regulation unit: smart controller (7'' touch display) Codpog Ey Rfsfx Admjrk – Heating control via solid-state relay – Switch cabinet IP54 – Cooling managed by solenoid valve – Flow measurement based on differential pressure principle – Bypass between supply and return line with reduced cross-section – Level monitoring by magnetic float switch – Flow monitoring by measuring heating element surface temperature and flow rate – Dirt filters in cooling water inlet and in the return flow of the circulation system – Monitoring of supply temperature by electronic safety temperature limiter – External oil filler neck – Dilo fittings on internal pipe connections (except pump connections) – At 350°C: constant bypass including bellows valves – Connection for nitrogen blanketing with pressure gauge and safety valve (0.5 bar at 350°C) (option) Visit our website for more details or for different performance classes. *The unit is compliant with European directives. Other directives and standards are only considered fulfilled if stated in the order confirmation. This technical specification represents the standard equipment; customer requirements deviating from the standard will be shown in quotations and/or order confirmations.*

Sąlyga: labai geros būklės (naudotas), Here we offer you a Zwick / Roell universal testing machine / table-top tensile testing machine. Zwick / Roell Material Testing Machine Model: BDO-FB0.5TH Test load capacity tension/compression: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Test area width: unlimited Test area depth: 100 mm Max. travel without accessories: 1266 mm Crsdped Sr S Iefx Admsk PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power supply: 115/230 V (PH, N, PE) Nominal power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Type: BDO-FB0.5TH Condition: used Scope of delivery: (see image) (Subject to modifications and errors in the technical data; all information is non-binding!) If you have further questions, we are happy to answer them by phone.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Stock no. 2587k 1 used pelletizing line, function tested, Throughput up to approx. 600 kg/h depending on material, consisting of: 1 volumetric dosing unit Extruder Plastmachines type PME 100 Single screw Ø 100 mm – 35 L/D Crjdpfxetvfhce Admjk Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backflush incl. Hydraulics 3 kW Strand die with 20 x Ø 3.5 mm holes Strand cooling tank 400 x 4000 mm with strand guide rollers Strand suction unit Strand pelletizer SG 3000 ResoTec control / control cabinet Inspection by appointment – short notice possible More pelletizing lines / extruders available ex-works Wuppertal & ready for demonstration

Gamybos metai: 1999, Sąlyga: naudotas, Used Entex extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Crsdpjbqt Arofx Admek We can also offer you an Entex PL WE 70!

Sąlyga: naudotas, TECHNICAL DATA - Table size: 700 x 480 mm - Dielectric tank capacity: 600 L TRAVELS - Travel X/Y/Z axes: 350 x 250 x 250 mm - Travel U/V axes: +/- 90 mm - Max. taper: [°/mm] WORKPIECE - Max. workpiece dimensions: 900 x 680 x 250 mm - Max. workpiece weight: 400 kg - Surface finish quality: 0.125 μm WIRE GUIDANCE - Wire diameter: 0.15 - 0.30 mm - Spool weight: 5 - 8 kg - Speed: 30 - 270 mm/sec ELECTRICAL SUPPLY - Supply voltage: 380 V Cjdpfxsuhq Rls Admjrk - Total power consumption: 11 kVA WEIGHT AND DIMENSIONS - Required space: 2500 x 2500 mm - Machine height: 2200 mm - Machine weight: 2,890 kg MACHINE HOURS - Operating hours: 1,266 h ACCESSORIES - CNC control: Charmilles Pentium III CPU - Remote control - Coolant tank

Sąlyga: naudotas, Hymmen CombiCoater ELX-S 1400 coating line with UV dryer. - Technical specifications to follow shortly Csdpfslf H Tcox Admjrk - For self-dismantling and self-collection.

Gamybos metai: 2011, Sąlyga: dilaminuotas dirbtuvėje (naudotas), No. 2401 1 used double piston screen changer - backflush type Manufacturer: ECON Model: ESK 480-4B Year: 2011 Screen block 1: 2 pistons, each with 2x Ø 123.5 mm Screen block 2: 2 pistons, each with 2x Ø 176.3 mm, with a filtration area of 490 cm² Complete with: hydraulic unit, Siemens control system Csdpfsgbfwmex Admjrk The screen changer is ready for demonstration, viewing possible at short notice by arrangement. Further screen changers / melt filters available from stock in Wuppertal: EREMA RS and laser filters Kreyenborg K-SWE / RS Ettlinger ECO BD Plast Alphatec Gneuss Brit-Ass

Sąlyga: naudotas, Regoplas RT50 Termoöl-Temperiergerät | Thermoöl bis 300°C Crodpfx Adjdmn E Hjmek