Kraštų šlifavimo staklės

CHRISTEN KB 2

Būklė: naudotas, Gamybos metai: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8-100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450x280 mm Ram adjustment: 63 mm Strokes per minute: 140 Total power requirement: 7 kW Codpfx Ascxxx Hof Aegt Machine weight approx.: 3.5 t

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. Csdpfx Aouxft Eef Aogt -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, CNC Automatic Lathe Citizen M32 Cedpfxjydaado Af Aogt Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Max. machining diameter: 32 mm Max. machining length: 320 mm with 1 collet Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution: 0.001° Sub spindle speed: 200–8,000 rpm Max. clamping diameter, sub spindle: 32 mm Max. front drilling diameter: 12 mm Max. front tapping capacity: M10 Max. rear tapping capacity: M10 Spindle through bore diameter: 37 mm Number of mountable tools: up to 25, depending on type Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m / 2,048 kB Minimum input unit: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1,500 mm No guarantee is given for the correctness, completeness or accuracy of the information provided.

Būklė: labai geros būklės (naudotas), Star SA-12 Swiss-Type Automatic Lathe Technical Data Cgjdewi Ty Ajpfx Af Aot Rapid Traverse (X, Y, Z, ZB): 370 mm Maximum Feed Travel (X, Y, Z, ZB): 270 mm Minimum Input Increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum Turning Diameter: 13 mm Maximum Headstock Stroke: 140 mm Maximum Drilling Capacity: 7 mm Maximum Tapping Capacity: 7 mm Maximum Thread Cutting Capacity: M6 x P1.0 Main Spindle Spindle Speed: 500 – 12,000 rpm Drive: Spindle Drive Main Spindle Motor: 2.2 / 3.7 kW Main Spindle Indexing Angle: 1° or 15° Spindle Bore: 20 mm Tool Slide Type: Linear Slide Number of Tools: 6 tools Number of Driven Tools: 3 tools (Collet: ER 11) Driven Tools Spindle Speed: 1,970 / 2,330 rpm Max. Drilling Capacity: 4 mm Max. Milling Capacity: 4 mm Sub-Spindle Max. Clamping Diameter: 13 mm Max. Part Length for Front Ejection: 85 mm Max. Unclamping Length: 30 mm Spindle Speed: 500 – 8,000 rpm Sub-Spindle Motor: 0.5 kW Tool Selection: 4 tools Max. Drilling Capacity: 4 mm Max. Tapping Capacity: M3 x P0.5 Power Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power Consumption: Average 6.0 KVA SCOPE OF SUPPLY Including (not limited to): STAR SA-12 Swiss-Type Automatic Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Feeder Exact scope of supply according to the photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Būklė: naudotas, Gamybos metai: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clearance between frame uprights: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Pass-through opening in table: 950 x 250 mm Cedsvuun Tepfx Af Asgt Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading operations and automatic operation in accordance with CE standards Equipped with infinitely variable drive, safety light curtain (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic drawing cushion in the table (20 t), motorized central lubrication, operator panel with two-hand control Clear space between tie rods: 940 mm Side opening: 900 mm

Būklė: geras (naudotas), Gamybos metai: 2000, CNC Surface and Profile Grinding Machine Cedpfx Afsfrbckj Aegt Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Grinding area: 600 x 270 mm Electro-magnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine base tray. Complete machine documentation available.

Būklė: naudotas, mašinos/transporto priemonės numeris: 7979, Table diameter: 400 mm Codpfx Aob Ez R Uof Aegt Table with 8 T-slots: 12 mm Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Būklė: beveik kaip naujas (naudotas), Profile grinding machine Utma model P20 Cgedpfx Afoff H E Re Aet

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, ruošinio svoris (maks.): 130 kg, šlifavimo ilgis: 1 500 mm, šlifavimo disko skersmuo: 500 mm, bendras plotis: 2 155 mm, bendras ilgis: 5 465 mm, bendras aukštis: 1 700 mm, šlifavimo skersmuo: 300 mm, šlifavimo ratuko plotis: 63 mm, Apvali šlifavimo staklės buvo generališkai suremontuotos 2021 m. ir nuo to laiko beveik nenaudotos. Staklių būklė – praktiškai kaip nauja. Komplektacija kaip nuotraukose. Staklės prijungtos prie elektros tinklo ir jas galima bet kada apžiūrėti pagal susitarimą. Techniniai duomenys: Cgsdpfxox A Dfyo Af Aot Šlifavimo diametras: 300 mm Šlifavimo ilgis: 1500 mm

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 1° SUB SPINDLE Cgodpfsu Elkqjx Af Aot - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm BUSH HOLDER 1 - Number of positions: 9 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 3 COUNTER OPERATION - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 73,252 h - Spindle hours: 50,900 h ACCESSORIES - Control: Fanuc 18iT - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank - Bar loader: IEMCA CH 220/32L - Fire extinguishing system * Note: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer. - Electrical transformer - Number of driven tool holders: 3