CNC tekinimo staklės

Chevalier FVL-1250VTC+C

Sąlyga: naujas,

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2010, keliamoji galia: 200 kg, rankos pasiekiamumas: 2 400 mm, PLC Merkezi olarak, stoklarımızda bulunan endüstriyel robotlarımız ile bu örnekteki gibi özel mühendislik projeleri gerçekleştirebiliriz. Size aşağıdaki konularda destek olabiliriz: - Kaynak - Kesme - Makine Besleme - Paletleme - Depaletleme Lhjdpfsq Dpxdex Af Ieb - Mermer İşleme - Abkant Makinesi Besleme ve Metal Bükme - Ve daha birçok proje Marka: KUKA Model: KR200-3 Comp Durum: 1 yıl garantili, revize edilmiş Versiyon: V5.6.12 Yıl: 2010 Kontrol Kabini: KRC2 ed 05 Nominal Taşıma Kapasitesi: 200kg Erişim Mesafesi: 2400mm Dahil Olanlar: Manipülatör + Kontrol Kabini + Tüm Kablo Setleri + Teach Pendant + 1 Hertz Spindle Motor (Yeni) + Delta Spindle (Mekanik Sistem ile Takım Halinde) + Takım Değiştirici Tabla Dahil Olmayanlar: 7. Eksen, Mühendislik Tasarımı ve Danışmanlık Nakliye: Fiyata DAHİL DEĞİLDİR Ödeme: Teslimattan önce %100 ödeme

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m Ljdpfx Afsvy Ihdo Ijhb 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Vertikalus CNC tekinimo staklės – 3 ašys Gamintojas: HYUNDAI WIA Modelis: LV 800 RM Metai: 2019 (575 val. pjovimo laiko) CNC: FANUC 32iB + manual guide Specifikacijos: Tekinimo galimybės: Maks. praeinantis skersmuo: 890 mm Maks. tekinimo skersmuo: 800 mm Maks. tekinimo aukštis: 800 mm Horizontali eiga: 440 mm Ljdpoxxt Ebjfx Af Iehb Vertikali eiga: 800 mm C ašis: 360.000 pozicijų Hidraulinis trijų žandikaulių griebtuvas: Skersmuo: 530 mm Sūkių dažnis: 2000 aps/min Pagrindinio variklio galia: 37/30 kW Matmenys (plotis x gylis x aukštis): 2000 x 2877 x 3300 mm Svoris: 11 t Įranga: 12 įrankių revolverinė galva C ašis 0.001° Stacionarūs įrankiai, veleno galia 7.5 kW, 3000 aps/min Įrankių vidinis aušinimas 20 bar Renishaw Quickset nustatymo sistema 3 ašiniai ir 3 radialiniai rotaciniai įrankių laikikliai Tekinimo įrankių laikikliai Žandikaulių komplektas Rankinis trijų žandikaulių griebtuvas, ø 630 mm Drožlių transporterio sistema

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Parduodame šį įrenginį. ISO 50 tvirtinimas, veleno centriniu būdu aušinimas X ašis 9000 mm Y ašis 4 000 mm Pasukamas stalas S 30, apkrova 30 000 kg, matmenys 2 500 x 3 500 mm Veleno apsisukimai 10–3 000 aps./min Plokštės: 1 vnt. 4000x2000 mm ir 1 vnt. 2000x2000 mm Heidenhain iTNC530 Du kampuoti profiliai, įrankių priedai. Tai yra pilna darbo vieta. Ljdpfxsx Auzls Af Iohb Įrenginys bus atlaisvintas iš gamybos 2026 m. sausio pabaigoje.

Sąlyga: naudotas, Gamybos metai: 2008, x-axis travel: 12,000 mm y-axis travel: 1,500 mm z-axis travel: 3,500 mm Feed rate: 20,000 mm/min Spindle mount: DIN 69871 A50 / HSK63 Speed range: 35–6,000 rpm Table load capacity: 30,000 kg Operating hours: 26,658 h Control: Siemens 840 Digital Milling head: Automatic milling head, 45°, Internal coolant supply: 60 bar Coolant system: JUMA+GAIN, 200 L capacity Chip conveyor: included Tool changer: 80 positions Total power requirement: 209 kW Machine weight: approx. 75 t - Automatic 45° head, 6,000 rpm, with 0.001°/0.001° positioning (DIN69871 A50) Lhsdpexvdunsfx Af Ieb - Rotary head (5 axes), 18,000 rpm, 23 kW, DIN69893 HSK A63 - Direct output head, 6,000 rpm, DIN 69871 A50 - Extension head 500 mm, 2,000 rpm, DIN 69871 A50 - Tool holding heads for turning with Capto 6 clamping systems - Automatic head changer (AHC) - AITEK ACH head changing station for automatic exchange of 4 heads - Rotary table with linear drive mod. ZA/B-2000 Table longitudinal traverse (B): 2,000 mm Table rotation (B): 0.001° Table surface: 2,500 x 2,500 mm Max. speed: 10,000 mm/min Hydrostatic system: included Table load capacity (max.): 30,000 kg - Rotary-milling table BOST Ø 2,500 mm Chuck size: Ø 2,500 mm Chuck longitudinal travel: 1,500 mm Table load capacity (max.): 25 t Spindle drive power: 2 x 37 kW Rotational speed (max.): 200 rpm Milling power (max.): 55 kW Rotary-milling axis: included Linear travel speed: 15,000 mm/min - BLUM LASER MICRO A5 - Probe M&H PS 20 with DIN 69871 A50 - Probe M&H PS 20.00 with DIN 69893 HSK A63

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2002, Technical specifications are subject to change without prior notice. Lhodpfx Aev D U Ifof Iob Axis travel ranges of the CERUTI 25 model: X-axis: Travel range 10,000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Y-axis: Travel range 2,500 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Z-axis: Travel range 1,000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. A-axis: Travel range +/- 95°. C-axis: Travel range +/- 200°. T-axis: Continuous motion. Operating speeds of the linear axes: X, Y, Z axes: 20,000 mm/min. Axis accelerations: X-axis: 1,000 mm/sec². Y, Z axes: 1,000 mm/sec². Note: Accelerations may vary depending on the installed CNC control unit. Spindle: Type: ISO 40, ISO 50, electrospindle HSK A63. Power: 30 kW. Torque: 280 Nm. Maximum speed: 12,000 rpm. Mounted tool holder type: HSK A63. S.G.M. tool changer: Number of positions: 20, 30, 74. Maximum tool diameter for adjacent positions: 100 mm. Maximum tool diameter for non-adjacent positions: 200 mm. Maximum length: 300 mm. Maximum tool weight: 12 kg. Tool change time: 20 sec.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, A used CNC gantry milling machine with a carousel rotary unit / C-axis for turning operations Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Maximum turning diameter: 2,500 mm Maximum turning height: 1,000 mm Machine: Uniport 6000 Ljdpfxovvh T Se Af Ijhb Boring operations, as well as CNC turning, CNC milling, and angle head machining — all in a single setup, combined with the speed and precision of a CNC gantry milling machine. C-axis for turning applications Original price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover to prevent chips from entering the Hirth gearing on the slide during milling operations. It also includes a turning attachment head for turning tools and an angle head for side machining on the plate field or rotary table. The angle head can be swiveled in 2.5° increments via the Hirth gearing. All tool holders (milling, turning, angle head) are clamped using HSK-100. A wireless probe by M&H (Hexagon) for measuring and setting the zero point is included with the machine. The machine is currently in operation and available for inspection on site. A video of the machine is available.

Sąlyga: naudotas, Gamybos metai: 2009, X-axis travel: 3,000 mm Y-axis travel: 2,500 mm Z-axis travel: 2,475 mm W-axis: 800 mm Rotary table: Juaristi MG-12 Rotary table surface: 2,000 x 2,500 mm T-slots: 11 T-slot width: 170 mm Table load capacity: 8,000 kg Table rotation, B-axis: 0.001° Ljdpfx Aju D I R Dof Iohb Control: HEIDENHAIN iTNC 530 Quill diameter: 130 mm Speed: 3,000 rpm Tool holder: ISO 50 DIN 69871/1-B Swiveling: +/- 2.5° Spindle motor: 30 kW Gear stages: 2 Speeds: 0–2,500 rpm Boring spindle: D’ANDREA UT5-800-S mm/min Diameter: 800 mm Cross travel: 250 mm Tool changer: 30 positions Internal coolant supply: 20 bar Chip conveyor: included HEIDENHAIN handwheel: HR-420 Machine weight: approx. 45 t Space requirements: approx. 9,800 x 7,320 x 5,500 mm - RENISHAW RMP-60

Sąlyga: naudotas, Gamybos metai: 2007, Siemens Sinumerik 840 D CNC Control Weight 57,000 kg Operating Voltage 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 For hobbing cylindrical and worm gears as well as all other hob-capable profiles and shapes regularly occurring on cylindrical workpiece surfaces. Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing operations on cylindrical gears for numerous industries: wind power plants, industrial gear units, mining and shipbuilding, gear manufacturing, and more. The machine's drive power range is designed to accommodate future tool developments. The gear hobbing head drive is, of course, backlash-free. These machines are particularly well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred. The machine can be used for both dry and wet machining and is equipped with the corresponding chip conveyor for both operating modes. The machine is fitted with an internal profile milling head as a motor-driven milling head. --> Working Range and Technical Data Workpiece nominal diameter: 2,400 mm Maximum hobbed diameter approx.: 2,800 mm Minimum/maximum distance between cutter and workpiece axis: 100/1,200 mm Maximum axial slide travel (custom version): 1,300 mm --> Maximum Clamping Capacity for Cutter (Internal Milling Head): Maximum diameter: 440 mm Maximum cutter width: 90 mm Swivel range of internal profile milling head / vertical axis: +/- 15° Cutter arbor taper: HSK-B160 Maximum cutter shifting travel: 300 mm Table diameter: 2,500 mm Indexing gear diameter: 2,200 mm --> Table Bore: Diameter: 800 mm Depth: 875 mm Maximum table load approx.: 40,000 kg --> Max. Feed and Rapid Traverse Rates: Lhodjwzyp Iepfx Af Ieb Axial (Z-axis): 4,000 mm/min Radial (X-axis): 3,000 mm/min Tangential (Y-axis): 3,000 mm/min --> Cutter Coolant System/Electrocentrifugal Pump: approx. 150 l/min Discharge height, magnetic chip conveyor raised: 1,600 mm Raised main column: 1,300 mm axial slide travel --> Internal profile milling head as motor-driven milling head in place of standard motor-driven head --> Max. profile depth machinable in steel (approx. 600 N/mm² tensile strength): approx. 65 mm Cutter speed infinitely variable: 50 - 150 rpm Max. cutter diameter: 440 mm Min. cutter root diameter: 310 mm Max. cutter width: 90 mm Min. internal diameter at 0° helix angle: 800 mm+ Max. workpiece height at 0° helix angle: 600 mm Max. workpiece ring thickness (incl. clamping device): 500 mm