Vielos elektroerozinės pjovimo staklės

Charmilles Robofil 510

Sąlyga: geras (naudotas), Gamybos metai: 1988, Sunkiojo tipo didelio tikslumo horizontalus tekinimo staklės su hidrauline Rohm užspaudimo sistema, stumdoma dalis su dviem darbo padėtimis, Sauter 4 pusių įrankių laikiklis, žiedinio tekinimo agregatas, CNC 6 ašių, griebtuvas, drožlių transporterio sistema. Tinkamos dideliems medžiagos kiekiams nuimti bei itin tiksliam tekinimui. Staklės modifikuotos, sumontuotas 2000 mm skersmens veidinis tvirtinimo diskas, padidinti matmenys. Pagaminimo metai: 1988 Pagaminta: Vokietija Tekinimo diametras virš lovos: 2500 mm Tekinimo diametras virš teleskopinių gaubtų: 2200 mm Tekinimo diametras virš stumdomosios dalies: 1400 mm Tekinimo ilgis: 6000 mm 3 griebtuvų stalas, 2000 mm Veleno skylė: 200 mm Prikabinamas žiedinio tekinimo įtaisas Apdirbamo ruošinio svoris: 4.500–40.000 kg Revolverinė galva: 4 pozicijos Veleno apsukos: 4–400 aps./min. Pagrindinis variklis Siemens 95,5 kW Didžiausias sukimo momentas: 40.000 Nm Ihsdpfxexmb Ads Af Ist Bendras energijos poreikis: 125 kW Valdymas: CNC SIEMENS 8T, 6 valdomos ašys Staklių svoris: 43.000 kg Reikalinga erdvė: 13.000x4.000 mm

Sąlyga: naudotas, Gamybos metai: 2006, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control unit: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 Ihedev Az Ucjpfx Af Ijt T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter (adjacent slots empty): 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Footprint: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2017, veikimo valandos: 6 900 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 300 mm, Maksimalus ruošinio svoris: 500 kg Isdpev Ai Ukefx Af Ieht Judėjimo eigos: X: 350 mm Y: 250 mm Z: 300 mm C: 360° Pagaminimo metai: 2017 16 vietų RTC keitiklis

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Y travel: 700 mm Iedpfx Asvz Tyusf Ieht Z travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 tools Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Handwheel

Sąlyga: naudotas, Technical details: Ram stroke – max.: 250 mm Workpiece diameter – max.: 80 mm Max. workpiece length: 900 mm Total power requirement: 1.5 kW Machine weight approx.: 2.1 t Various accessories Ihedpfxew Au I Ie Af Ijt

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle/table (vertical): 1,230 mm Clamping surface (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Ihsdpfx Afju Nc Ems Ist Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, rotary table type with turntable, for 32 tool positions Chip conveyors: 2 hinge belt conveyors, manufacturer DGS, with water tank, insertion length 8,500 mm Make BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil-water cooling unit for hydraulic oil and spindle cooling Coolant system: Band filter, manufacturer DGS, type SBF 150 Operation: via control console, type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld control unit: HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective panels with viewing windows and safety doors) Hydraulic unit Work area lighting

Sąlyga: paruoštas naudoti (naudotas), Travel distances X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Ihodpfx Afeuqacke Ijt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 930088, Country of Manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net Weight (machine + cabinet): 3250 kg + 400 kg Customs Tariff Number: 8456.30 20 Dimensions: 260x281x225 cm TECHNICAL SPECIFICATIONS Machining Type: immersion Maximum workpiece dimensions: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table size: 900x600 mm Floor to table distance: 900 mm Total dielectric volume: 1200 L Ihsdpfjw Ucyujx Af Iet X, Y, Z, U, and V axes X, Y, Z travels: 550 x 350 x 400 mm U, V travels: 550 x 350 mm Anti-collision protection: X, Y, U, V, Z axes Taper machining, max. cone: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: double Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data provided without liability for errors or omissions.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle completely overhauled at the end of 2024 !!! Drives for linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Ihsdpfxsw Rl S So Af Ijt Color Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - Three-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. Machine still connected to power and immediately available.

Sąlyga: naudotas, Gamybos metai: 2000, x-travel: 3,700 mm y-travel: 3,050 mm z-travel: 1,000 mm Control: HEIDENHAIN TNC-430 PA Distance between columns: 2,300 mm Spindle nose to table surface: 1,175 mm Rapid traverse x/y/z: 25,000 mm/min Working feedrate: 15,000 mm/min Tool holder: ISO-50 – DIN 69871 Table load capacity: 20,000 kg Spindle motor: 37 kW Milling head – swivel range: +/- 45° Milling head B axis: 360,000 positions Tool changer: 30 positions/tools Chip conveyor included Ihodpjwg Hrgjfx Af Ijt Internal coolant supply: 20 bar Table size: 4,000 x 1,800 mm Machine weight: approx. 42 t Model: KPU-4000 AR