Srautinio sprogimo mašina

CETINGIL TK - 6 Ø: 1000 mm NEW

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 851 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 500 kg, bendras svoris: 17 000 kg, alyvos bako talpa: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Press force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific press force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive output: 22 kW Total connected load: 65 kW Tying: 4-fold vertical, fully automatic Throughput at a bulk density of: 30 kg/m³ approx. 5.5 t/hour 50 kg/m³ approx. 7.5 t/hour 100 kg/m³ approx. 9.7 t/hour Bale weight at a bale length of approx. 1.2 m: up to 500 kg, depending on material PLC: Siemens S7-1500 Operator panel: Schneider Harmony Press dimensions installed: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials of small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting challenging materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive output: 4.0 kW Belt speed: approx. 0.3 m/second Feed belt length: 2,679 mm Incline belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height incline belt: 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN Quality N) Overall height: 4,515 mm Transport dimensions overall: 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Prsdpsu Thbxsfx Afwod Condition of the baling plant: Due to the low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of delivery: - Avermann baler, type AVOS 1410 BS-22/50, incl. wire tying stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Notes: Full documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Viewing is possible by appointment. We assume no liability for the technical data or any possible errors.

Sąlyga: labai geros būklės (naudotas), MEMBRANE PRESS For laminating MDF-style panels with PVC, PP, and PET with VARIOPIN fully automatic pin system Automatic front loading/unloading and preparation table (Double tray carriage 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions mm: 1500 x 2800 mm Usable working area mm: 1250 (or 2 x 600) x 2550 Prodpfx Aforwxz Rjwsd Front loading width from 1500 mm (usable width 1250 mm) Separate control cabinet and controls (with electronic programming device) SIEMENS SIMATIC panel touch Total installed power approx. 50 kW OPTION “Paternoster” roller magazine Roll unwinder (roll holder) with coating film cutting system

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Pipe Ø: 25 – 60 mm Wall thickness: 1 - 4 mm Coil Ø: max. 3,000 mm Coil weight: max. 10 t Finished pipe length: 3,600 - 8,500 mm Round pipe Ø: 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm Speed: max. 100 m/min Working direction: left → right Line configuration: Psdpfxjuc Shuj Afword - Decoiler - Crop shear - Welding table - Edge trimming shear with scrap cutter - Scrap conveyor - Strip edge preparation - Entry table - Forming unit - Internal/external scarfing tools - Cooling section - Sizing section - Testing unit and length measurement - Cut-off - Rejection station for scrap pipes - Blow-out station - Oiling station - Bundling station - Strapping station - Bundle removal - Electrical system

Sąlyga: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 400 mm, matavimo diapazonas Y ašis: 500 mm, matavimo diapazonas Z ašis: 300 mm, Visio 500 optinė/taktilinė 3D matavimo mašina 453 (400 X, 500 Y, 300 Z) darbinė eiga. Matavimo programinė įranga: PC-DMIS CAD versija 2015 Tyriklių keitimo stotelė 6 pozicijų, iš viso 2 TESASTAR MP moduliai Prodpfxoiyymre Afwod Silent PC Big Tower su Windows 7 (viskas paruošta darbui) Kamera su 200 kartų optiniu priartinimu, žiediniu/koaksialiniu ir diafanoskopiniu apšvietimu Viskas pilnai veikia. Y ašyje yra nežymių įbrėžimų, kurie buvo nušlifuoti. Tai neturi įtakos veikimui ar tikslumui.

Sąlyga: naujas, Gamybos metai: 2025, - Tfon Leveltech® TF M-5516 lyginimo staklės Sukurtos preciziškam lyginimui, TF M-5516 efektyviai apdoroja 1–15 mm storio medžiagas, su pažangiomis valdymo funkcijomis optimaliai darbo eigai ir paprastam valdymui - Pagrindinės specifikacijos - Medžiagos storis: 1–15 mm - Didžiausias medžiagos plotis: 1 600 mm - Mažiausias medžiagos ilgis: 110 mm Greito keitimo sistema tiesinimo volams: Standartas Lyginimo tarpo reguliavimas: Servohidraulinis / valdomas kompiuteriu Prsdokyrqfepfx Afwsd Apsauga nuo perkrovos: Standartas Valdymo ekranas: Jutiklinis ekranas Staklių matmenys (I × P × A): 3 500 × 2 905 × 1 950 mm Bendras svoris: 19 000 kg.

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. Prjdpfx Afofg E Hpewsd • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow Prodpfx Afjh Rdwxjwjd - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, MILESTONE S 2040 Very good condition – only approx. 100 operating hours Predpfx Afjwd Ih Dewod Axis Travel: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 250 mm Equipment: - 1x cutting head, 5-axis incl. automatic angle compensation - Height sensing incl. anti-collision monitoring - IGEMS software - Automatic sludge removal via chain conveyor - Abrasive tank and automatic abrasive dosing High-pressure pump Jetpower EVO Total power consumption: 45 kW Power connection: 400 V +/- 5% / 50 Hz Max. water pressure: 4,100 bar Water flow rate: max. 5.6 l/min Including installation, training, and warranty

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, slėgis: 6 juosta, garantijos trukmė: 60 mėnesiai, vidinis plotis: 5 000 mm, vidinis ilgis: 10 000 mm, vidinis aukštis: 5 000 mm, filtravimo plotas: 250 m², tūrio srautas: 16 m³/val, Įranga: apšvietimas, dokumentacija / vadovas, Blast room *up to 5 years warranty* for all abrasives, constructed from steel frame/isopanels with filtration system, recirculation system, abrasive preparation, 200l pressure blasting pot with automatic refilling, blast hose with dead man control, breathing air system, LED lighting, wall lining made of 70shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Abrasive return via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across full width as sweep pit or complete flat belt floor. Workpiece transport can be retrofitted: blast trolley with track bed, crane system, crane roof opening, etc. For glass bead blasting of stainless steel, upgradeable with proper magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetizing stage and a second air separator for abrasive separation and cleaning. Safety features: battery emergency lighting, emergency stop buttons inside and outside the cabin, viewing window to the blast chamber, door/gate limit switches, dead man control, rapid vent pressure vessel. Up to 5 years warranty on various components. Prsdpfxsu Ey Dls Afwod 50 years of experience and more than 3,000 systems in blast equipment engineering.

Sąlyga: geras (naudotas), Gummiband-Strahlanlage mit Muldenband Max. Chargenvolumen: 800 L Max. Chargengewicht: 2.000 kg Max. Werkstückgewicht: 150 kg Trommeldurchmesser: 1.350 mm Trommelbreite: 1.350 mm Anzahl der Turbinen: 2 Leistung je Turbine: 11 kW Max. Turbinendurchsatz: kg/min Reinigungstyp: Luft Fundament: nicht erforderlich Gehäuseschutz: Mn (Manganstahl) Pjdpfx Afelf Hq Njwerd Erforderlicher Luftdurchsatz: ja Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm