Horizontalus apdirbimo centras

CC Machinery CT2-52YM

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Schütte AG20 multi-spindle automatic lathe Nlodjhrihyjpfx Aa Dod

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. Nsdpfxowf Dpgo Aa Dsld A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spraying Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Būklė: naudotas, Gamybos metai: 1992, veleno greitis (min.): 7 500 aps./min, veleno greitis (maks.): 24 000 aps./min, 4 motor-driven grinding spindles (liquid-cooled, with sealing air / oil mist lubrication) including REFU HF frequency converter, e.g., for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for the power supply of motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as-is – year of manufacture approx. 1992. A collection of various grinding spindle shafts / arbors for grinding wheels are available for these grinding spindles and can be purchased separately. Nlsdpfxol Tn Afj Aa Dod Price / details on request. All technical details are subject to errors or omissions. We sell exclusively to countries within the European Community.

Būklė: geras (naudotas), Gamybos metai: 2008, X ašies eiga: 4 230 mm, Y ašies eiga: 1 950 mm, Z ašies eigos atstumas: 750 mm, stalo ilgis: 4 000 mm, stalo plotis: 1 250 mm, stalo apkrova: 11 000 kg, CNC Gantry Milling Machine KAO MING - KMC 4000 SV-H Double-guideway and flat guideway design Automatic head changer for multi-side machining of larger workpieces Automatic tool changer for horizontal and vertical milling heads, swiveling Distance spindle nose to table: 213–1093 mm Distance spindle center to table: 130–… mm Horizontal head indexing: 5 degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torque: 1018 Nm, ISO 50 Universal milling head, Huron type X-axis travel: 4230 mm Y-axis travel: 1950 mm Z-axis travel: 750 mm Column gap: 1500 mm Table length: 4000 mm Table width: 1250 mm Table load capacity: 11,000 kg X-axis feed rate: 12,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 12,000 mm/min Tool holder: 50ISO/Bt/Mk Spindle power: 26 kW Spindle speed: 4,400 rpm Tool changer: 30 positions Njdpexf E Twsfx Aa Dsld Chip conveyor: Yes Coolant system: Yes Length: 10,100 mm Width: 4,500 mm Height: 4,250 mm Weight: 30,000 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 30214501, tekėjimo ilgis: 2 000 mm, bendras ilgis: 12 000 mm, WFL Millturn M60-G/2000 WORKING RANGE Distance between centers: mm 2000 Swing diameter over cross slide: mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power at 100% duty cycle: kW 60 Max. spindle speed: rpm 2600 Max. spindle torque at 100% duty: Nm 2748 SUB-SPINDLE DRIVE AC drive with 2-speed gearbox Drive power at 100% duty cycle: kW 40 Max. spindle speed: rpm 3300 Max. spindle torque at 100% duty: Nm 1830 TOOL CARRIER (Single-tool carrier, turning-boring-milling unit) AC drive, drive power at 100% duty: kW 25 Nledpju Hl R Tefx Aa Dsd Max. spindle speed: rpm 4000 Max. spindle torque at 100% duty: Nm 300 Travel perpendicular to X/Z plane (Y-axis): mm 300 [−125/+175] Swivel range of milling spindle (B-axis): ° −110/+90 Spindle interface for tools according to DIN 69893: HSK-A63 Spindle diameter in front bearing: mm 100 DIMENSIONS Length (max., with tool magazine and chip conveyor): m 11×12 Width/height: m 4.2/3.5

Būklė: naudotas, Gamybos metai: 2001, Sukimosi skersmuo 340 mm Sukimosi ilgis 750 mm Valdymas SYSTEM TX 8H Veleno perėjimo skersmuo 80 mm Apskritimo skersmuo virš skersinio stalo 530 mm Apskritimo skersmuo virš lovio 665 mm Pagrindinio veleno greičių diapazonas 3.150 min/-1 Pagrindinio veleno variklio galia 22 kW Įrankių vietų skaičius 12 pozicijų. Mūsų vertinimu, įrenginys yra geros naudotos būklės, apžiūrėti galima prijungus prie elektros pagal susitarimą. Yra 2 įrenginiai. Kaina už vienetą. 1 įrenginys: - Nuotraukos 1-5 - Darbo valandos apie 55.790 h 2 įrenginys: - Nuotraukos 6-10 - Darbo valandos apie 54.347 h Techninės charakteristikos ir priedai: - Y ašis - Priedų paketas su fiksuotais ir varomais įrankių laikikliais - Drožlių transporterio sistema Nledsxwdw Eepfx Aa Ded Priedai, darbo įrankiai ir spaustuvai, matomi nuotraukose, į pristatymo komplektą įtraukiami tik jei tai nurodyta papildomoje informacijoje. Techniniai duomenys ir informacija gali būti keičiami, galimi netikslumai. Galimas tarpinis pardavimas!

Būklė: labai geros būklės (naudotas), Ruošinio skersmuo: 10 - 250 mm Srieginio ilgio: 900 mm Srieginio žingsnis: 0,3 - 100 mm Veleno sūkiai: 72 / 1700 - 2540 aps./min. Užpakalinis nušlifavimas: 0,03 - 8 mm Maks. įtvirtinimo ilgis: 1190 mm Modulis - maks.: 10 Ruošinio sūkiai: 0,4 - 160 aps./min. Bendras galios poreikis: 13 kW Nsdpfx Aaoyb S Rie Deld Staklių svoris apie: 7,4 t Užimama vieta apie: 4,5 x 2,0 x 2,1 m Labai daug priedų: flanšai, keitikliai, dresavimo įrankiai, dresavimo ritinėliai, vidinio šlifavimo velenai, lunetės ir kt.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module – max. 0.5 – 10 Pressure angle 15 – 25° Speed 2800 rpm Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Finishing and re-profiling on the following models: Nledsvibc Hepfx Aa Djd NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM,... Right adjustment plate with micrometer screw adjustment, axial Left adjustment plate with micrometer screw adjustment, radial 2 precision motor spindles for mounting diamond wheels.

Būklė: naudotas, Gamybos metai: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm Nodpfjulnbkox Aa Deld Table size 2500 x 600 mm Max. workpiece weight 2000 kg Tool holder SK40 Control HEIDENHAIN Spindle speeds 30 - 8000 rpm Feed rate 45 m/min Rapid traverse 45 m/min Total power requirement 20 kW Machine weight approx. 10,500 kg Space requirements approx. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control - Tool magazine with 30 stations - Chip conveyor - Sieve filter system with internal coolant supply (IKZ) - Operating manual Optional (on request): - Wireless probing system (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Būklė: naudotas, Gamybos metai: 1987, Technical details: Number of spindles: 8 Spindle passage: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles Max. nominal passage D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in positions 2/3 Electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Nlodpfx Aajiay Sfe Ded Oil operation Including loading magazine IEMCA PRA40/37/F, year 1987 (bundle loader) Painted in light blue and light grey Tool configuration may differ from the illustrations. Please contact us for more information and photos via email (at) or *