Konsolinė konsolė

Cantilever BI-front

Būklė: naudotas, Sijos: 2700x120x50 mm, 63 vnt. Rėmai: 5200x1000x95 mm, 17 vnt. 4600x1000x90 mm, 4 vnt. 2300x1000x95 mm, 2 vnt. Jei jums reikia lentynų ar priedų kitose komplektacijose ar konfigūracijose, susisiekite su mumis. Siūlome platų naujų ir naudotų lentynų bei priedų asortimentą ir mielai padėsime su jūsų planavimu. Kiti priedai, tokie kaip: rėmų, kampų ir atspyrimo apsaugai, praslydimo apsaugos, medžio drožlių plokštės, grotelių lentynos, galinės tinklinės sienelės, gylio sijeliai — taip pat tiekiami. Njdpfx Acsh Izr Uopsla Siuntimas: Kreipkitės dėl pristatymo kainos nurodę savo pašto kodą, miestą ir pageidaujamą prekių kiekį. Papildomos paslaugos: Projektavimas, lentynų montavimas/demontavimas, pirkimas/pardavimas Pasiliekame teisę keisti techninius duomenis, informaciją, kainas ir tarpinį pardavimą!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and corner-processing operations within the technical capabilities specified in the manual for parts made of plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastics, composites, and aluminium. The vertical work table ensures easy loading and unloading of workpieces, while also limiting the machine's maximum dimensions to the necessary minimum. Tool changes are performed using a 10-position tool magazine located on the side of the machine, allowing for various operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: Nlodpfxemzbr So Acpja X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speeds (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): up to 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): up to 2,800

Būklė: naujas, Gamybos metai: 2025, Effektive Rohrlänge für den Zuschnitt: 6500 mm / 9200 mm Laserleistung: 6000 W / 3000 W / 2000 W / 1500 W Effektiver Schneiddurchmesser Rundrohr: Φ20–230 mm Effektiver Schneiddurchmesser Vierkantrohr: □20×20 – □160×160 mm Njdpfx Acog Dgbhspola Schnittkantenlänge: 20–170 mm Außendurchmesser maximal: ≤230 mm Zertifizierung: CCC, CE, GS, ISO, SGS Lasergenerator-Marke: IPG / MAX Garantie: 3 Jahre Stromversorgung: 110V/220V/380V 50Hz/60Hz 1. Größer als der Standard Der maximale Schneiddurchmesser der T-Serie ist 30 % länger als bei marktüblichen Produkten; das maximale Schneidgewicht ist im Vergleich zu handelsüblichen Maschinen um 100 % erhöht. 2. Spannfutter-Positionskontrolle und Drehmomentregulierung Das CNC-selbstzentrierende Spannfutter mit eigenem Patentschutz kann das Werkstück automatisch gemäß eingegebener Rohrgröße spannen; die Positionsüberwachung im Drehmomentmodus stellt sicher, dass dickwandige Rohre nicht gelöst und dünnwandige Rohre nicht verformt werden. Die neue, staubdichte Konstruktion gewährleistet einen langlebigen, störungsfreien Betrieb. 3. Kantenerkennung und Zentrierung Neue Funktion zur automatischen Kantenerkennung und Rohrzentrierung. Optimiertes Kantenerkennungsverfahren und Algorithmus ermöglichen höhere Schnittgenauigkeit und Prozessstabilität.

Būklė: naudotas, Gamybos metai: 1999, galia: 3 kW (4,08 AG), įėjimo įtampa: 400 V, pjovimo aukštis (maks.): 200 mm, pjūklo disko skersmuo: 520 mm, bendras svoris: 350 kg, pjovimo ilgis (maks.): 420 mm, tvirtinimo skersmuo: 50 mm, pjūklo pavara: 3 000 W, No. 04511 Graule ZS 200 N Crosscut and Mitre Circular Saw Used, Year of manufacture: 1999 Saw swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Blade arbor: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminium fence Includes machine stand and rear handwheel for tilt adjustment Hydraulic feed brake Pneumatic material clamping from both sides, top-down Saw blade spray unit for coolant or lubricant Carbide-tipped circular saw blade for aluminium and plastics, 520 mm diameter Roller conveyor, type RLK 4000 mm, with fold-away material stop and scale Roller conveyor, 4000 mm long after saw Roller conveyor width: 350 mm Transport dimensions of the machine approximately 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approximately 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended Nljdpfx Ajyh Nfuocpea Sale in current condition Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. Sold as inspected. Terms of payment: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex stock

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Nodpfeu R Szaox Acpola Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Gamybos metai: 2018, būklė: geras (naudotas), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm Njdpfxox Diqwj Acpela 3-axis control with 15" display Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side protective fence Minimum quantity lubrication Centralised lubrication Thread cutting without compensating chuck Simple programming via control device High-speed spindle up to 18,000 rpm Includes 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400 mm, cutting angles: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Nsdpowu Ez Nofx Acpola

Būklė: naujas, Dedikuota mašina, skirta tiesios griovelio / išpjovos įvairoje medienos gaminių, naudojamų baldų gamyboje, bendrosiose staliaus dirbtuvėse, sodo baldų, sandėliukų, gegnių ir karkasinių konstrukcijų gamyboje, įpjovimui. Taip pat gali būti naudojama durų rėmų gamybai, gegnių atramų įpjovimui ir rąstinių namų gamyboje. Standartiškai įrengta horizontaliomis pneumo spaustuvėmis ruošiniams bei hidrochekinio amortizatoriaus valdymu, kuris užtikrina tolygų frezos eigos judėjimą. Nodpfxsdy Hm Dj Acpela Tikslus rutulinių guolių judėjimas grūdinto plieno kreiptuvais. Tvirta lieto ketaus konstrukcija su plieniniu pagrindu. 3 kW variklis. Didžiausias įrankio skersmuo 250 mm. Įrankio vidinis skylės diametras 40 mm. Frezos variklio rankenėlės aukščio reguliavimas. Didžiausias išpjovos / griovelio gylis – 60 mm. Griovelio / išpjovos plotis – 60 mm per vieną pravažiavimą. Maksimalus įrankio eigos ilgis – 250 mm. 2 horizontalūs ruošinio spaustuvai. Hidrochekinis skersinio pjovimo svirties amortizatorius. Dulkių nutraukimo jungtis – 100 mm. Mašinos stovas.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, An aluminium die casting machine is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mould locking: double toggle lever, shot chamber: cold chamber, orientation: horizontal. Shot plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm²/338 cm², capacity: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar distance: 500 mm/500 mm, mould height min./max.: 250 mm/600 mm, min. mould dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Njdpfsucfwpex Acpela

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice Njdpfx Aceh Ek Daepela - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.