Sausas letena dulkių siurblys

Busch Mink MM 1322 A V

Sąlyga: labai geros būklės (naudotas), JET is a numerically controlled machining center with 5 interpolated axes, designed for the following processing operations: Tenoning / finger jointing / drilling Mortising / milling / 4/5-axis profiling. Technical specifications: Nedpfx Adjirmyqeuoli Fully digital NC axes: 5 Interpolated linear axes: 3 Interpolated rotary axes: 2 Longitudinal (X) axis: 1,800 / 2,200 mm Transverse (Y) axis: 1,300 mm Vertical (Z) axis: 650 mm Clamping table length: 1,400 / 1,800 mm Single axis: unlimited C-axis: +/- 180°

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Wide-belt sander DMC USK 1350 M3 – Made in Italy – Cross-belt unit (so-called 'sergeant') – Year of manufacture: 2011 – Electric and pneumatic ionizer TECHNICAL SPECIFICATIONS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st unit: Cross-belt (so-called 'sergeant') Motor power: 12 kW 2nd unit: Rubber roller Hardness: 95 Shore Diameter: 240 mm Nodpfxegr Er Se Adusli Motor power: 18.5 kW 3rd unit: Rubber roller Hardness: 55 Shore Roller diameter: 300 mm Motor power: 15 kW 4th unit: Pneumatic pad Motor power: 15 kW 5th unit – Cleaning brush – 2.2 kW 6th unit – Air blower Blower for the belt Pneumatic oscillation Feed speed: 2.5 – 18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Sąlyga: naujas, The new vacuum pump is available from stock and ready for immediate use. We recommend that installation is carried out only by trained personnel. Adaptation materials available upon request. Oil fill: without Technical data: 2.7 kW Nedjttzxrepfx Adusli 3 x 230/400 V 50 Hz 1500 rpm Oil return into non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Interim sale reserved! This offer is valid only for customers within Germany and other European countries!

Sąlyga: visiškai atnaujintas (naudotas), The fully overhauled vacuum pump is available from stock and ready for immediate use. We recommend installation is carried out only by trained personnel. Adaptation materials available on request. Oil fill: M-VAC 100 Technical Data: 7.5 kW 3 x 190 – 208/380-415V/220-240V 50 Hz incl. gas ballast in B-cover incl. level switch Nlsdpfx Adeipu Umeuji cooler reduced in size ultimate pressure with gas ballast open: 1.5 mbar ultimate pressure with gas ballast closed: 0.82 mbar Subject to prior sale! This offer is valid only for customers within Germany and European countries!

Sąlyga: naudotas, Plant: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on the medium Design: Robust, high-performance construction Material: Stainless steel (VA) on container frame, 30' container, scraper plates: made of PP Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Operating Principle: The wastewater is fed to the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates inside the clarifier, the water is redirected below the lamellas and then flows upwards through the plates. As a result, solids settle onto the lamellas and the clarified water is directed to the outlet. The solids gradually slide down along the lamella plates, where the sludge funnel is located. Njdpfx Adoppyhtsusli Rake Mechanism: Optionally, we offer the inclined clarifier equipped with a rake mechanism, which keeps the sludge in a flowable condition. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. By pre-thickening thin sludge, the filter press can be designed with a smaller filter area. The plant is in good condition and is available for rental or purchase. An inspection at our facility can be arranged by appointment. We also offer new inclined clarifiers with a lead time of approx. 8 to 10 weeks!

Sąlyga: labai geros būklės (naudotas), a truly unique item, approx. 12 x 6 m Njdpfjfi Tmcex Adujli

Sąlyga: geras (naudotas), Roots blower Manufacturer: Leybold Model: RUVAC WSU 2001 Cat. No.: 11741 Pumping speed: approx. 2000 m³/h Nledjdnv D Sepfx Aduji Condition: Fully overhauled Warranty: 12 months (Image similar)

Gamybos metai: 1983, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 2103, Max. clamping chuck bore: 1 - 20 mm Ø Max. radius to be ground: 20 mm Cup wheel diameter: 100 mm Cup wheel speed: approx. 4500 rpm Drive motor: 380 V, 0.25 kW Required space: 600 x 450 x 1380 mm Njdpfednfz Nox Adusli

Gamybos metai: 2012, Sąlyga: geras (naudotas), Machine has 5,600 total spindle hours Datron D5 Dental Milling Machine, Year of manufacture: 2012, 5-axis simultaneous machining, Nlodewvqh Depfx Aduoi Control: PC - Beckhoff, Automation / 8 blanks, Milling spindle 1.8 kW, Spindle speed up to 50,000 rpm, Tool holder: HSK C 25, 15-position tool changer, Rotary – swivel axis, A axis +/- 25°, B axis +/- 45°,

Sąlyga: naudotas, Rotary vane vacuum pump – oil-lubricated Manufacturer: Leybold Model: Sogevac SV 200 Cat. No.: 10927 Nlsdecnyy Hjpfx Aduei Condition: Fully overhauled Warranty: 12 months Includes: Initial oil fill (mineral oil), operating manual with spare parts list Voltage: 50/60Hz 230–400/460V Motor rating: 4 kW Nominal pumping speed: approx. 200 m³/h Ultimate pressure without gas ballast: approx. 0.08 mbar Availability: Ex stock