Rotacinis mentinis vakuuminis siurblys

Busch Huckepack HO 437

Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 64532, used manual hydraulic pipe bending device Lhodpfx Afjdzw Hwo Ieb Available bending formers: 3/8", 3/4", 1 1/4" and 2" Space requirement: 850 x 640 x 780 mm

Gamybos metai: 2023, Sąlyga: naujas, Fully Automatic Orbital Stretch Wrapper SPINNER 1000s Lhodpofuwg Iefx Af Ijb Application: Packaging, bundling, and protecting long or bulky products such as furniture, doors, wooden panels, etc. Operator Side: - Right side in the direction of product flow General Technical Data: - Main motor power: 1.5 kW - Max. ring rotation speed: 80 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 770 kg Standard Equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with mechanical brake system - Automatic stretch film clamping and cutting system - Automatic film attachment system - Pneumatic front and rear holders that press from above during cutting to secure the product - Photo sensor for automatic start of wrapping process - Touch-screen for adjusting machine parameters to product requirements - Operator safety systems Optional Equipment: - Various conveyor configurations - Infeed and outfeed roller conveyors - Air bubble film wrapping unit Technical Specifications: Wrapping Sizes: - Max. length: unlimited - Min. size (WxHxL): 100x18x550 mm Conveyor Belt Features: - Usable length: 1924 mm - Total length: 2000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 12 m / sec - Load capacity: 100 kg/m Stretch Film Specifications: - Max. width: 200 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Sąlyga: naujas, Gamybos metai: 2024, slėgis: 8 juosta, Mitre adjustment horizontal 15°–90°–15° continuously variable, Saw motor 5.50 kW (400 Volt), Saw blade 600 mm, travel range rear stop 180 mm, working height adjustable from 940 to 1000 mm via leveling feet, 2 x extraction connections (top in hood and bottom), net weight 600 kg, dimensions (W x D x H): 135 x 140 x 150 cm, RAL 9007 grey aluminium. Turntable made from ground nickel-steel. Saw head with ball-type linear guides, offering high accuracy, long service life, and maximum rigidity. Saw material can be pre-clamped under low pressure when the hood is open. Hydropneumatic blade feed. Chip removal directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment continuously variable at 0º/45º/90º/–45º/–60º • Including 2 pneumatic clamps (vertical) • Saw blade feed infinitely adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device • Mist spray unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! Our NC pusher system ensures that your workpieces are positioned at the desired processing position on our UK 600 HA 90°. A gripper clamps the material, and the NC control positions the material automatically. The clamping and sawing process is then triggered. The positions are programmed into the controller beforehand. Once the machine has finished processing, it automatically moves to the next saw position. Depending on the workpiece, multiple parts can be clamped side by side or stacked and positioned simultaneously. Lhedpfegwt S Tsx Af Ijb You are welcome to inspect the system at any time in our manufacturing or demonstration hall. Please feel free to contact us for more information. Plantec Maschinen GmbH

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm Lhodpfxsvz Hq Hs Af Isb - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Sąlyga: labai geros būklės (naudotas), Power: 220-240VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW WITH OUTPUT CONVEYOR BELT Return belts: For envelope size 10.5 cm x 14.8 cm and for portrait orientation, the return belts should be pushed towards the central transport belt. Rule: for large envelopes, push the return belts outward; for small envelopes, push the return belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER requires no synchronization. Position the feeder into the printing press using the handles and set the required height with the hand crank. Important: Only after setting the print height, secure the rear rollers and check the machine's stability. Switch on the machine and begin printing. For single-sheet feeder printing machines (GTO): adjustable inclination. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speed. Compatible with all 36 x 52 printing presses, regardless of the feeding system (stream feeder / single-sheet feeder). – No mechanical modifications to the press required. – No synchronization settings needed thanks to laser technology. – Extremely short set-up times enable economic use from as little as 1,000 envelopes – Easy operation – The feeder’s design enforces overlapping feeding. This ensures the Stenz Feeder’s throughput is not restricted – Minimum wear parts for extremely long service life – Already approved in thousands of presses worldwide – A Swiss quality product – Designed by printers for printers. Lhjdpfsh Eibasx Af Ieb Specifications: Speed: Limited by the printing press Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Gamybos metai: 2003, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Lhedjiyyf Iepfx Af Isb complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Sąlyga: naujas, Gamybos metai: 2025, bendras ilgis: 1 600 mm, bendras plotis: 2 200 mm, bendras aukštis: 2 350 mm, bendras svoris: 250 kg, įvesties srovės tipas: trifazis, darbinis plotis: 1 400 mm, Paint booth, spray wall, extraction unit TQN1414 Ledpfx Afjd S N I Ne Iohb With right- or left-side discharge. Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: • Fan output: 1.5 kW, • Capacity: 6,500 m³/h, • 2 x 100% polyester filters • Filtration efficiency of 99.9%, • IP 66 control panel, • Automatic filter cleaning, • Hermetically sealed lighting, IP 65, • Paint tank Cabin is available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machines among those offered on the market. Professional consultation and service. Warranty. Warranty and post-warranty service. Comprehensive technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC-certified. We offer our own transport – pricing is determined for each specific offer. We issue invoices with VAT shown. Short delivery times! Possibility to order machines in various, customised configurations and dimensions! Please contact us.

Sąlyga: visiškai atnaujintas (naudotas), RA250D oxygen version, oil-free, assembled and filled with Fomblin. Completely overhauled, 0.5 mbar, 250 m³/h, available from stock. We currently have several oxygen vacuum pumps in stock. Ledpfx Afed R Trne Iehb

Gamybos metai: 2008, Sąlyga: labai geros būklės (naudotas), Screw pump Manufacturer: Busch Model: Cobra DS 600 E Lodpjd Rafbjfx Af Iehb Condition: Very good Delivery time: ex stock

Sąlyga: beveik kaip naujas (parodų įrenginys), ATEX-CERTIFIED PUMP Lhsdpfoftzgxox Af Iob Oil-bath rotary vane vacuum pump. Available in stock. Fully overhauled unit. Supplied with warranty. Nominal flow rate: 30 m3/h at 50Hz. Ultimate vacuum: 1x10^-3 mbar abs. For any questions, please contact us.