Automatinis iškirtimo presas
BRUDERER BSTA 30

Name: BRUDERER BSTA 30
Brand: BRUDERER
Availability: InStock

Gamybos metai

1971

Sąlyga

Naudotas

Vieta

Eislingen/Fils Vokietija

Automatinis iškirtimo presas BRUDERER BSTA 30

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Automatinis iškirtimo presas

Gamintojas:: BRUDERER

Modelis:: BSTA 30

Serijos Nr.:: 1967

Gamybos metai:: 1971

Sąlyga:: naudotas

Kaina ir vieta

Vieta:: Eislingen

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A2739818

Nuorodos Nr.:: 1009-2170

Naujinta paskutinį kartą:: Data 2024.06.12

Aprašymas

Pressure: 30 t
Stroke rate: 100 - 600 strokes/min
Adjustable stroke length: 8 - 40 mm
Ram adjustment: 40 mm
Infeed width: 198 mm
Minimum/maximum tool installation height: 230 - 270 mm
Roller width: 110 mm
Through-hole in table: 310 x 80 mm
Column spacing (left-right): 330 mm
Column spacing (front-back): 280 mm
Table height above floor: 990 mm
Column diameter: 50 mm
Voltage: 380 V
Frequency: 50/60 Hz
Control voltage: 24 V
Table size: 475 x 450 mm
Ram diameter: 190 mm
Total power requirement: 0.96 - 5.5 kW
Approx. machine weight: 2.5 t
Space required: approx. 1.2 x 1.16 x 2.15 m

Precision high-speed punching press in 3-column design, equipped with:
- Optionally available with original Bruderer precision double roller feed, right and left pull/push operation (see photo),
- Electro-hydraulic VARI drive,
- Pneumatic clutch with safety valve,
- Three operating modes: single stroke, single cycle, and continuous operation,
- Central lubrication,
- Cooling fan for consistent machine temperature,
- Pressure gauge for air pressure monitoring,
- Stroke counter integrated into the control panel,
- Separate, lockable control cabinet,
- Two-hand operation, and
- Safety emergency stop.

Newly painted, visually in good condition!
Chodpfxocxxxmj Ahvjc

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2003

136 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 7161 ... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

mažas skelbimas

Automatinis dvigubos kolonos štampavimo presas BRUDERER BSTA 30

Eislingen/Fils

1 206 km

Automatinis dvigubos kolonos štampavimo presas
BRUDERERBSTA 30

14 500 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: naudotas, Gamybos metai: 1982, Pressure 30 t Stroke 8 – 40 mm Strokes per minute 100 – 600 Upright width 330 mm Shut height (stroke + ram adjustment at top) 280 mm Side clearance between uprights 300 mm Table area 540 x 470 mm Die opening in table 315 x 110 mm Table height above floor 1000 mm Ram area 250 mm Material width 120 mm Csdpfjvuk Hrsx Ahvjhc Material thickness up to 3.0 mm Feed length up to 60 mm Drive power 5.5 kW Weight 2.6 t Space requirement approx. 1.5 x 1.2 x 2.2 m (L x W x H) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manual ram adjustment, fixed table, mechanical roller feed (Bruderer BBV 120/60) Table area 540 x 300 mm or 330 x 390 mm As is, ex location, WITHOUT commissioning.

Peržiūrėti detales

mažas skelbimas

Automatinė perforavimo mašina BRUDERER + SOPREM Typ BSTA 30

Schwabach

1 087 km

Automatinė perforavimo mašina
BRUDERER + SOPREMTyp BSTA 30

Skambinti

mažas skelbimas

Berlin

755 km

Perforavimo mašina
BRUDERERBSTA 30

Skambinti

mažas skelbimas

Eislingen/Fils

1 206 km

Automatinis iškirtimo presas
BRUDERERBSTA 30

Skambinti

Sąlyga: naudotas, Gamybos metai: 1979, mašinos/transporto priemonės numeris: 5255, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 540 x 450 mm Bruderer precision double roller feed: left Csdscxxu Njpfx Ahvehc Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, equipped with air cooler, piece counter, separate control cabinet, air clutch, BRUDERER precision double roller feed (left)

Peržiūrėti detales

mažas skelbimas

Automatinė perforavimo mašina BRUDERER BSTA 30

Strassberg

1 278 km

Automatinė perforavimo mašina
BRUDERERBSTA 30

Skambinti

Sąlyga: naudotas, Gamybos metai: 1979, mašinos/transporto priemonės numeris: 5136, Press force: 30 t Adjustable ram stroke: 16 - 40 mm Ram adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Gap between frame uprights (side-to-side): 170 mm Table clamping area approx.: 480 x 450 mm Ram clamping area approx.: 250 mm Strokes per minute: 100 - 600 min-1 Power requirement: 5.5 kW Dimensions LxWxH: 2,150 x 1,200 x 1,160 mm Machine weight approx.: 2.5 t Standard equipment Roll feed Feed length 20 - 100 mm Conventional press control by Bruderer Additional equipment Cjdpsuqd Rrjfx Ahvshc 2nd roll feed at table exit Vibration dampers (4x) Various adapter plates for the ram Raziol strip lubrication Vester tool monitoring Automation Roll feed BBV 120/60

Peržiūrėti detales

mažas skelbimas

Berlin

755 km

Automatinė perforavimo mašina
BRUDERERBSTA 30

Skambinti

mažas skelbimas

Eislingen/Fils

1 206 km

Automatinis iškirtimo presas
BRUDERERBSTA 30

Skambinti

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm BRUDERER precision double-roller feeder: left side Adjustable stroke range: 16–40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double-roller feeder on left Chodpfxjcxxyce Ahvjc

Peržiūrėti detales

mažas skelbimas

Berlin

755 km

Automatinė perforavimo mašina
BRUDERERBSTA 30

Skambinti

mažas skelbimas

Eislingen/Fils

1 206 km

Automatinis iškirtimo presas
BRUDERERBSTA 30

Skambinti

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 8483, Pressure: 30 t Strokes: 100–600 strokes/min Sheet width: 115 mm Table size: 450 x 450 mm Bruderer Precision Double Roller Feeder: BBV 190/85, left Adjustable stroke: 16–40 mm Column spacing (left-right): 330 mm Column spacing (front-back): 280 mm Chodpfxocxxrdo Ahvoc Installation height: 290 mm Entry width: 120 mm Feed length: 15–80 mm Control cabinet dimensions: 1.1 x 1.2 x 2.2 m Drop-through opening in table: 315 x 100 mm Total power requirement: 5.5 kW Approx. machine weight: 3 t High-speed punching press in 3-column design, with BRUDERER BBV 190-85 feeder (left), cooling fan, swiveling safety guard, pneumatic clutch, dual electrical two-hand control, manual roller ventilation in feeder.

Peržiūrėti detales

mažas skelbimas