Portalo frezavimo staklės

Bornemann BW2022

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Pgodpfx Asrn Riqsfwsw Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Sąlyga: naujas, Pressure 28 t Stroke 180 mm Table size 300 x 550 mm Piston diameter 130 mm Working speed min. 2 m/sec Working speed max. 9.8 m/sec Return speed 20 mm/sec Maximum pressure 200 bar Pgedpfogvkmrsx Afwew Machine weight approx. 0.65 t Total power requirement 4 kW Space requirement approx. 1.15 x 0.75 x 1.1 m • The horizontal bending and straightening press from Profi Press is a versatile hydraulic press, specifically designed for bending, profiling and straightening applications. The machine’s possible uses depend on the accessories mounted on the work table, the tool holder, and in the bores and pin holes. • The HB-28 model is equipped for light bending operations on the work table with an angle scale, and the press can also be supplied with tools (such as block punches) for mounting on the tool holder, as well as tools for installation in the bores and pin holes to perform a variety of tasks. • The hydraulic system can be adjusted via pressure and flow control valves, which regulate the pressing force and speed of the press. The press is equipped with a built-in pressure gauge. • The control panel is used to operate and display the piston stroke and to select between manual or automatic operation. The HB-28 model is also equipped with integrated memory for up to 4 different programs. • Operation is via electric foot pedals.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 200 mm, Y ašies eiga: 660 mm, veleno greitis (maks.): 80 000 aps./min, CNC GE FANUC 16 - M WORK AREA – GRINDING SPINDLE HEAD: Grinding spindle speed, stepless variable: - With electric motors: rpm 4,500 – 80,000 - With air turbines: up to rpm 100,000 and 160,000 Spindle head rotation speed, stepless variable: - With planetary movements: rpm 5 - 300 - With CN / C axis: rpm 0 – 20 Z-Axis Traverse Speed - With Z-axis feed, stepless variable: mm/min 0.5 – 14,000 - Max reciprocation frequency: Hz 5 Grinding spindle quill - Z-axis stroke length, stepless: mm 170 - Z-axis stroke length (manual operation): mm 180 - Diameter: mm 100 - Weight compensation: pneumatic Radial wheel increment, NC / U: mm 5.5 Pjdpfsv Ay E Hsx Afwogw Capacity Cylindrical grinding (with Ø 100 mm wheel) - Without intermediate plate: Ø 230 mm - With intermediate plate: Ø 360 mm - Grinding length Z: mm 125 WORKING RANGE: X-axis travel (table slide): mm 1,200 Y-axis travel (grinding spindle head): mm 660 W-axis travel (moving crossbeam): mm 635 FEED RATES: X and Y axes (CNC control) - Machining feed: mm/min 0 – 2,000 - Rapid traverse: mm/min 4,000 W axis: mm/min 800 POSITIONING DISPLAY: X and Y axes: mm 0.0001 Z axis: mm 0.001 C axis: mm 0.001° U axis: mm 0.0001 Datum point: selectable TABLE: Usable table surface: mm 1,320 x 860 Admissible table load: kg 800 T-slot width: mm 14 Number of T-slots: 7 T-slot spacing: mm 100 TOOL MAGAZINE: Magazine positions: 8 Max wheel diameter: mm 50 Max tool length: mm 135 Taper seat: HSK 25 Machine complete with: • Tank with paper filter • MSS Multi-Sensoric System • Fire extinguishing system • Oil mist extractor (de-oiler) • Operating manuals and CE declaration

Sąlyga: naudotas, Gamybos metai: 2014, DMC DL 80V CNC Vertical Turning Machine Year of manufacture: 2014 Pgsdpovr Ecpefx Afwow Turning diameter: 800 mm Turning length: 750 mm Spindle: 30 kW, 2000 rpm 12-position turret 21" chuck Fanuc Oi-Td control Machine weight: 9,800 kg Including chip conveyor and standard accessories

Sąlyga: dilaminuotas dirbtuvėje (naudotas), modernized machine with new LTG-StoreControl P control system Optional control system expansion available External dimensions: Construction height: 8,700 mm Construction width: 3,500 mm Construction depth: 1,580 mm 51 carriers, each with a payload of 350 kg Clear usable dimensions per carrier: Height = 255 mm Width = 3,050 mm Depth = 520 mm Chain pitch: 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table positioned 990 mm above finished floor level with stainless steel worktop, depth 315 mm Color: grey Drive motor power 1 x 3.8 kW / 400 Volt Subject to errors and technical modifications. Surfaces cleaned, signs of use and minor deformations possible. Pgjdpfod Spf Rox Afwow Delivery & installation currently primarily in Germany, Austria, and neighboring countries.

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 26 920 h, IRB 6640-235/2.55 Year of manufacture: 2011 We are also pleased to offer this robot fully reconditioned upon request! Pgedpeim Si Aefx Afwjw For further information, please do not hesitate to contact us!

Sąlyga: naudotas, Gamybos metai: 2004, Technical Details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Turning length: 4000 mm Distance between centers: 4000 mm Faceplate diameter: 800 mm Control: Siemens 810D Spindle speed: 1 - 1,600 rpm / 2-step Spindle torque: 6,000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse in X-direction: 4 m/min Rapid traverse in Y-direction: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 Size 11) Pedpfeu Ix Izsx Afwegw Operating hours / On-hours: to be read out Tailstock quill: ISO MT 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centers: 5,000 kg Max. workpiece weight – unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power requirement: approx. 52 kW Machine weight approx.: 14.0 t Machine dimensions (LxWxH): approx. 2.6 x 9.1 x 2.5 m Cycle turning lathe with Siemens cycle control Motor: 37 kW, rated speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gearbox stages Stage II: Spindle torque 258.9 to 1,364.6 Nm Stage I: Spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electrical cabinet Parat quick-change tool post Coolant system Including various accessories (see photo), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 2 500 mm, Z ašies eigos atstumas: 760 mm, greitas poslinkis X ašimi: 20 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 15 m/min, ruošinio svoris (maks.): 12 000 kg, bendras aukštis: 48 500 mm, bendras ilgis: 85 800 mm, bendras plotis: 56 000 mm, stalo plotis: 2 400 mm, stalo ilgis: 3 020 mm, bendras svoris: 20 kg, veleno greitis (min.): 10 aps./min, veleno greitis (maks.): 6 000 aps./min, atstumas nuo stalo centro iki veleno galo: 960 mm, veleno nosis: ISO 50, įrankio ilgis: 350 mm, įrankio skersmuo: 127 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Vertical gantry machining centre "AWEA LP-3025" Pgsdpfx Aferl Svrswew

Sąlyga: naudotas, Gamybos metai: 2001, x-axis travel: 2050 mm y-axis travel: 1100 mm z-axis travel: 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, Spindle speed: 60-6000 rpm, Number of tool stations: 60, Tool magazine: BT 50, Drive power: 22/26 kW, Table pitch: 250 mm, Control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, Width: 3300 mm, Height: 3800 mm, Weight: 25 t, with High Precision Contour Control, Central lubrication extension (2005), axis upgrade (X-Y-Z) to linear scales (0.001 mm), Memory expansion 128 KB, tool compensation memory (200 pcs), High Speed Remote Buffer, Extraction via HEPA filter system, upgrade to high-pressure internal coolant supply 20 bar, and zero-point clamping system with 16 pots each. Pgsdpfx Ajrw Dknefwjw

Sąlyga: naujas, Gamybos metai: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range: 30° right / 45° left Cutting capacities in mm: 45° left: round 300, flat 300 x 300 90°: round 410, flat 620 x 410 45° right: round 360, flat 420 x 360 30° right: round 300, flat 300 x 300 Remaining piece length without bundle clamping: 60 mm Pgodoh S Nxpepfx Afwew Recommended options: Micro-spraying device Laser light Clamping pressure regulator Powered chip brush Manual lifting roller Mounting elements