Mechaninis kirpimas

Bombled 9G - 2500 mm x 4 mm

Sąlyga: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: A-07/471A, Sheet width - max.: 130 mm Straightening roll diameter: 40 mm Number of straightening rolls: 5 Draw rolls: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Nkjdpfx Aocxxx Rjf Iet Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated steplessly adjustable VARI drive, forward and reverse operation, mode selector switch for manual and automatic, entry roller basket, position display for straightening rolls via analog display, adjustment of straightening roll positions via handwheels, automatic loop control, very good condition

Gamybos metai: 1971, Sąlyga: geras (naudotas), Decoiler – Expanding Mandrel Decoiler with Coil Lifting Table Strip Width: 1,200 mm Strip Thickness: 0.3 – 5 mm Coil Weight: 10 t Nsdpfod Ha E Sex Af Iskt Mandrel Ø: 508 mm

Gamybos metai: 1976, Sąlyga: geras (naudotas), Strip width: 300 - 1,350 mm Strip thickness: 0.35 - 3 mm Njdpfobh Ubwjx Af Iskt Coil weight: 12.5 t Mandrel Ø: 508 mm

Gamybos metai: 1980, Sąlyga: naudotas, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Nksdpfxodlcy Hs Af Iot Space requirement approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Further information: - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.

Sąlyga: naudotas, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Nsdpfx Afefn Aqme Iokt Straightening speed: 2.5 ... 15 m/min Decoiler: Expanding range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. (specify dimensions) Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and freshly repainted.

Sąlyga: labai geros būklės (naudotas), Capacity 2000 x 4 Footprint 3000 x 2000 Rear sheet follower Nkedpfx Aeuml R Eef Ist

Sąlyga: naudotas, A used, well-maintained Vöest Alpine guillotine shear Cutting length: 2010 mm Cutting capacity in steel up to 370 N/mm² tensile strength: 5 mm Strokes per minute: 50 spm Hold-down pressure: 30 bar Number of hold-downs: 8 pcs. Backgauge manually adjustable: 950 mm Nedpfepgmpdjx Af Iskt Throat depth: 150 mm Dimensions (LxWxH): 280 x 190 x 140 cm Weight: 2500 kg

Sąlyga: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, tiesinimo volelių skaičius: 7, ritės svoris: 4 000 kg, ritės išorinis skersmuo: 1 500 mm, padavimo velenėlių skaičius: 2, tiesinimo volo skersmuo: 80 mm, ritės plotis: 600 mm, Decoiler Type: MS 4000 Coil weight: max. 4,000 kg Strip width: max. 600 mm Coil diameter: max. 1,500 mm Expansion range: 475 – 535 mm Features: • Hydraulic expansion • Hydraulic pressure arm from above with hydraulically driven roller • Swivable front guide roller, rear support disc, and three additional individually attachable guide arms • Electric motor drive of the decoiler drum, controlled via light sensor • Decoiler hydraulically traversable • Coil lifting table Straightening Machine Type: MR 58 Strip width: max. 600 mm Strip thickness: 0.8 – 3.6 mm at 400 N/mm² strength Number of straightening rolls: 7 units, supported Number of feed rolls: 2 units Roller diameter: Ø 80 mm Speed: 5 – 30 m/min Features: • Rolls hardened and ground • Pneumatically liftable feed roll • Straightening rolls adjustable as a block • Lateral strip guide at machine inlet, manually adjustable via hand crank • Hydraulic strip threading aid (support table, extendable tongue, and pressure roller from above) Nksdsq A Tw Ropfx Af Ijt • Straightening head can be opened • Ultrasonic sensor for loop control • Swiveling control panel • Siemens S7-200 control system

Gamybos metai: 1989, Sąlyga: naudotas, Sheet width: 100 mm Coil outer diameter: 800 mm Load capacity: 150 kg Speed: 0 - 60 m/min Total power requirement: 2 kW Approx. machine weight: t Space requirement: approx. 2.89 x 1.38 x 1.4 m Load capacity: 2 x 150 kg Strip width: 100 mm Expansion range: min. 170, max. 540 mm -Coil rewinding line with 3 single-coil decoilers, Type 150.2: -Coil width: 140 mm Nedpfx Aeb U Hwwof Iokt -Expansion: manual bolt expansion -Coil outside diameter: 800 mm -Brake: pneumatic disc brake -Lateral adjustment: manual via spindle Recoiler, Type 150.1: -Brake: motor brake -Lateral adjustment: manual via spindle

Gamybos metai: 1986, Sąlyga: naudotas, Pressure: 40 t Installation height: 250 mm Stroke: 8 - 50 mm Clamping area table (L x W): 620 x 450 mm Table height above floor: 980 mm Stroke rate: 85 - 500 strokes/min Clear distance between columns: 680 mm Slide adjustment: 50 mm Number of T-slots: 4 Slide area: mm Total power requirement: 8 kW Required space (approx.): 2.3 x 2.2 x 2.8 m Machine weight (approx.): 5.8 t - Slide with 2 connecting rods - Unidor die monitoring - Kaiser gripper feed, right side, strip width 180 mm, feed length 150 mm, max. 2 mm - Kaiser scrap shear, left side Nkedpscb T Twjfx Af Ijt - Soundproof enclosure - Roller-mounted eccentric shaft