HBC 60 A su grandinės diržo konvejeriu

Bollegraaf Recycling Solutions B.V. HBC 60 A

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), NEUE HERBOLD Granulator Cgodpfxeh Rwc Ee Ab Tou Universal Mill – Heavy-Duty Design - Year of manufacture: 1998 - Made of stainless steel - From technical center (machine was used exclusively for testing/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 knife rows

Gamybos metai: 2006, būklė: beveik kaip naujas (naudotas),

Būklė: nepatikrintas (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, kamuolio ilgis: 1 000 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 750 750 750 mm, balo svoris: 500 kg, įėjimo įtampa: 400 V, bendras svoris: 7 500 kg, alyvos bako talpa: 500 l, galia: 30 kW (40,79 AG), tuščias svoris: 7 500 kg, įėjimo dažnis: 50 Hz, Manufacturer: Pal Pacomat V Codeic Rl Djpfx Ab Togu Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), adjustable length Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is operational; the drive motor is currently disassembled.

Būklė: geras (naudotas), Manufacturer: MBT Model: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Unit dimensions: 3500 x 1000 x 2200 mm Cgodpfxjhzr U Is Ab Tju

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, paskutinio kapitalinio remonto metai: 2025, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. Csdpfx Abovf E Avo Tsgu The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: paruoštas naudoti (naudotas), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of recyclable material volumes in industrial and commercial applications: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials. DIXI 60 SLD horizontal baler, waste baler with tilting device Technical specifications: Csdpfx Asra A E Uob Tjgu - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800 x 1100 x 1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Feed opening: 990 x 1110 mm - Machine weight: 5,420 kg - Average press cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data: - Make: Dixi - Model: 80 SLD - Pressing force: 80 tons - Drive power: 11 kW, 400 V / 32 A - Hopper opening (W x H): 1040 x 1110 mm - Press cycle: approx. 35 s - Throughput: approx. 1,000 kg/h - Bale size (W x H x L): 1120 x 1120 x 1200 mm - Bale weight: depending on material approx. 500–600 kg - Bale binding: triple, manual - Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg - Automatic bale ejection - Robust construction for long-term use - Year of manufacture: 2016-2020 - Weight: approx. 8.4 tons - Condition: Used

Būklė: paruoštas naudoti (naudotas), HSM VK 42/1200 Fully Automatic Baler Pressing force: 42 tonnes Bale dimensions: 700 x 800 x 600 – 1200 mm Bale weight: approx. 450 kg Press length: approx. 7 metres Press weight: approx. 6000 kg Cgjdpfxera Nrxs Ab Tou Binding: 4 x automatic wire tying

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, veikimo valandos: 14 300 h, Metso Nordberg HP200 – Kūginis trupintuvas pardavimui Darbo valandos: 14 300 Būklė: Pilnai veikiantis, šiuo metu naudojamas, reguliariai aptarnaujamas Įrenginio aprašymas Parduodame Metso Nordberg HP200 kūginį trupintuvą – vieną iš patikrintų ir efektyviausių savo klasės įrenginių. Mašina kasdien eksploatuojama, prižiūrima pagal gamintojo rekomendacijas, puikios techninės būklės. Puikiai tinka aukštos kokybės skaldos gamybai stacionariose ir mobiliose gamybinėse linijose. Pagrindinės savybės Didelis trupinimo efektyvumas ir nuosekli galutinio produkto kokybė Puikus veikimas su kietomis ir vidutinio kietumo medžiagomis Hidraulinis tarpo reguliavimas (CSS) Stabili eksploatacija su mažomis nusidėvėjimo sąnaudomis Patikima, tvirta konstrukcija, plačiai naudojama Europos karjeruose Cgodpfx Abexyi Rie Teu Techniniai duomenys (HP200) Galvos skersmuo: 940 mm CSS intervalas: 6–38 mm (priklausomai nuo konfigūracijos) Didžiausias padavimo dydis: 185 mm Variklio galia: 132 kW Našumas: iki maždaug 250 t/h (priklauso nuo naudojimo ir nustatymų) Trupintuvo svoris: apie 12 000 kg Siūlomo įrenginio informacija 14 300 darbo valandų Pilnai veikiantis, nuolat eksploatuojamas Yra nuolatinės priežiūros ir aptarnavimo įrašai Galima apžiūrėti dirbančią mašiną

Būklė: beveik kaip naujas (naudotas), Manufacturer: V. Randwijks Rotor diameter: 500 mm Rotor width: 700 mm Csdsg Snt Sepfx Ab Tjgu Drive: 22 kW / 1,470 rpm

Būklė: paruoštas naudoti (naudotas), Techniniai duomenys Dixi 60 AUTOMAT presas Pakrovimo anga plt. x aukšt.: 1550 x 1000 mm Variklio galia: 31,5 kW Cjdpfxov Amw Nj Ab Tsgu Presavimo jėga: 60 t Ryšulio svoris (priklauso nuo medžiagos): 350–600 kg Ryšulio matmenys plt. x aukšt. x ilgis (reguliuojama): 1100 x 800 x 300–1600 mm Presavimo / ciklo laikas: 13/24 s Įrenginio svoris: 7000 kg