Sraigtinis kompresorius

BOGE S 5 ECO DR - 10 bar

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Tsdpjfyadbjfx Alcsd Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), Panel type: Coreboards for 3-layer parquet, panel length: 2230 mm, panel width: 782 mm, panel thickness: 9 mm–22 mm, panel thickness tolerance: 0.5 mm/panel, feed rate: 15 m–50 m/min, capacity: 12 cycles/min, working height: 1015 mm, max. saw blade diameter: 250 mm. Extraction system included. Documentation available. On-site inspection possible. Todpfx Ast Amc Islcod

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 2329200, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 33 674 h, X ašies eiga: 800 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 800 mm, bendras svoris: 11 000 kg, stalo ilgis: 700 mm, stalo plotis: 900 mm, veleno greitis (maks.): 16 000 aps./min, stalo apkrova: 800 kg, 5 ašių apdirbimo centras, gamintojas: DECKEL MAHO, modelis: DMU 80 P duoBLOCK, pagaminimo metai: 2006, nurodytos veikimo valandos: 33 674, serijos numeris: 2329200, eigos diapazonai (X/Y/Z): 800/800/800 mm, didžiausia veleno sukimosi greitis 16 000 aps./min., įrankių laikiklis HSK 63, valdymo sistema HEIDENHAIN Mill Plus IT, G7 funkcija, vidinis aušinimo skysčio tiekimas, 60 vietų įrankių keitiklis, drožlių konvejeris, filtrų sistema DMG, serijos numeris: 13812-01560, aušinimo agregatas DMG WK331. Todpfx Alsrkz Rgecod

Būklė: paruoštas naudoti (naudotas), Ilgis 6000 mm Plotis 2500 mm Bendras galios poreikis / kW Be kompiuterio ir programinės įrangos Todpoud Il Ssfx Alcod Matmenys (I x P x A): 6000x2500x350 mm be vakuuminės plokštės Pagaminta pagal DIN876/II

Būklė: naudotas, Gamybos metai: 2000, SCM Tech 99L apdirbimo centras Pagaminimo metai: 2000 Todpfx Astxdqcelcod Matmenys ir svoris transportavimui: 4800 x 230 mm, aukštis 260 mm, svoris 2800 kg.

Būklė: naudotas, Gamybos metai: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis traverse: 200 mm. Clearance height: 180 mm. The main body structure is a monolithic design made of thick-walled steel. It is reinforced throughout the machine bed with welded-in triangular plates, making it extremely stable. The triangular shape with a broad base, used for load-bearing parts, is the key to ensuring sustained precision and stability. The machine layout allows the operator to optimize workflow with a minimal footprint. This main body provides the processing unit with a balanced and secure foundation, featuring outstanding load distribution. Tedpfox Twdyex Alced The moving aggregate carrier is manufactured as a solid monoblock. It is positioned in the X-direction on ground, prismatic linear guides using recirculating ball carriages. The working unit is also mounted on these ground prismatic guides and ball carriages on the mobile aggregate carrier. Description of aggregates and basic accessories: Drilling unit: Drilling head with 10 + 4 spindles • 6 individually selectable vertical spindles in X • 4 individually selectable vertical spindles in Y • 2 horizontal spindles in X (1+1) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm • Power: 2.2 kW • Pitch: 32 mm • Chuck: M10 with 11 mm seating • Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): • Tool holder HSK 63F • Speed: 1,500 – 24,000 rpm, stepless via inverter • Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) • CW/CCW rotation • Ceramic bearings • Scope of delivery: 4x tool holders (right) without collet Tool changer: • Side-mounted 7-position tool magazine (TR7), fully enclosed against chip projection • 7 tool slots for HSK 63F tool holders in a row • Max. tool diameter D = 120 mm • Max. weight per tool holder 4.5 kg • Max. total tool weight 20 kg (TR7) • Angular gear units can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposed outputs for milling and grooving. • Speed: 9,000 – 18,000 rpm, stepless via inverter • 1 output for collet 3-20 mm (ER32) • 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) • Motor power: 3 kW (4 HP) • Max. front milling tool diameter: 20 mm • Max. front milling tool length: 110 mm • Max. rear milling tool diameter: 12 mm • Max. rear milling tool length: 80 mm • Max. saw blade diameter: 100 mm • Saw blade bore (ER32): 50 mm • Saw blade arbor diameter (ER20): 12 mm Worktable: The worktable is designed to guarantee the operator maximum freedom of movement. The quick-release vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of workpieces. • 4 supports, 900 mm, steplessly adjustable manually along X • 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) • 2 stops in X (1 left / 1 right) • 1 stop in Y per support (total 6) • Retractable reference stops are CNC controlled • Supplied: 4 plug-in adapters for suction cups • Pendulum processing as standard (2 working zones) Axis motion: The drive system in X, Y and Z directions uses ground recirculating ball screws of the highest precision class. The ball screw for the X-axis is positioned precisely at the center line...

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, CECCATO CSM 5.5 X Mini Screw Compressor Todpfx Ajvurttolcsd Power: 4 kW Operating Pressure: 10 bar Capacity: approx. 470 l/min Noise Level: 62 dB Dedicated Dryer Air Receiver: 270 l

Būklė: geras (naudotas), Sepro Robot Type: SR 4030 S3 Year: 08-2006 Todpfx Ajnxkdnjlcjd

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Parduodama Stromab švytuoklinė pjūklas su pasukama pjūklo galva ir ritininiais takais. Variklio galia: 7,5 kW, pjūklo disko skersmuo: 600 mm, disko skylė: 20 mm, maks. pjovimo aukštis: 210 mm, maks. pjovimo ilgis: 460 mm, ištraukimo jungties skersmuo: 150 mm, kairio/dešinio ritininio tako ilgis: 2500 mm/2500 mm, ritininio tako plotis: 500 mm, svoris: apie 600 kg. Yra dokumentacija. Galima apžiūra vietoje. Todpfx Aloyb Scljcsd

Būklė: naudotas, Gamybos metai: 2018, Delivery time approx. 5 months Machine from educational use – excellent condition, low hours (edging unit unused). Supplied without tools. Additional costs for disassembly / shipping / assembly and commissioning / training. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding – Made for You This CNC machining center is equipped with a comprehensive range of edge banding tools to meet every requirement in wood processing. MAIN ADVANTAGES - High performance, featuring the advanced H80C edge banding unit, drilling spindles with 8,000 rpm, and market-leading spindle technology with over 1,000 maintenance-free operating hours. - Better equipped: Suction cups can be configured using the FLEX table system for optimal machine setup according to requirements. - Easier and more intuitive programming thanks to the integrated CAD/CAM module for edge banding technology (MAESTRO EDGE). - User-friendly: The lowered frame allows unrestricted access to the working table at any time; the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are required. Base Structure: The fundamental structure is a monolithic, thick-walled steel construction, reinforced across the entire machine bed with welded box sections for exceptional stability. The specially designed, wide-base machine bed ensures lasting precision and rigidity. The supporting structure consists of a robust monolithic steel pedestal with heavy ribbing for maximum stiffness; the especially broad base is designed to provide machine stability, ensuring continuous precision regardless of working conditions, with no need to anchor the machine to the floor. The pedestal offers a large, solid foundation for the movable gantry: the work unit benefits from a balanced, stable, and resilient support able to withstand maximum loads, resulting in higher-quality performance and greater accuracy. The movable gantry is a solid single component fixed to the base, running on high-quality prism guides with recirculating ball carriages. The working unit is mounted on this gantry and travels in Y and Z axes via prism guides with recirculating ball carriages. Tsdpjzvhlkjfx Alcod Movement of the lower movable unit (X-axis) and the working unit along the gantry’s Y-axis is achieved via helical rack-and-pinion drive, delivering greater tooth engagement for higher acceleration and increased speed on X and Y axes. The custom-engineered helical gearing minimizes wear on mechanical components and ensures quieter operation. Vertical Z-axis movement is driven by a recirculating ball screw, providing perfect balance under dynamic loads and supporting rapid acceleration and deceleration. The main milling unit is directly attached to the Z-axis carriage, guaranteeing maximum precision in machining operations.