Katilas

Bioláng

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants Kdedpjiuznusfx Af Iog - Offshore and marine engineering

Sąlyga: labai geros būklės (naudotas), Buderus Logano SK735 – 830 kW, 6 bar, also available with 1200 or 1400 kW Kdsdehtf Dkjpfx Af Iog

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Viessmann Paromat-Triplex Output: 225 kW Installed in a container. Kdodpfet Iuyfex Af Isg Inspection only by prior telephone arrangement! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Of course, we can also take care of all formalities. Loading possible.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, padavimo eiga Y ašimi: 6 000 mm, Tipper tray for logs up to 6 m in length. Available from September 2024. Ksdpfxor Iig Ds Af Isdg

Sąlyga: naujas, Round bar 30 x 1 mm Square bar 30 x 30 x 1 mm Solid round bar 16 mm Solid square bar 30 x 10 mm Rotational speed 9 rpm Kdodeh D Svnopfx Af Ijg Total power requirement 1.1 kW Machine weight approx. 0.32 t Space requirements approx. 0.82 x 0.60 x 1.26 m Electric section bending machine with - 5 sets of rollers 2x for round bar 20 mm and 30 mm, 1x for flat bar 1x for square bar 1x for ? - Foot switch with emergency stop

Sąlyga: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* Ksdpfxjg Ezare Af Ijdg - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm Kdedpfxsrigxye Af Isg - Machine inspected and in original condition

Sąlyga: naudotas, Hydraulic power unit, hydraulic pump, universal unit Kdjdpsf Tdt Isfx Af Ieg - Manufacturer: H+L, hydraulic power unit for hydraulic punching machine - Type: DK52 1-6-250P-391K - Motor: Junginger 5.5 kW / 1455 rpm - Pressure gauge: up to 250 bar - Pressure accumulator: Hydac 2.5 liters - Hydraulic tank/filter/valves: see photos - Dimensions: 540/630/H1210 mm - Weight: 198 kg

Sąlyga: naujas, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTED FEATURES: • Smart Controller Plus 7" touchscreen / Industry 4.0 compatible • Flow measurement, adjustable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-sub connector 20mA/TTY • Connection for external temperature sensor PT 100 for measuring and displaying tool temperature • Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers • High-performance pump, hydraulic parts in stainless steel (VA), magnetically coupled Kdsdpfx Afeftm Hrs Iog • Tool emptying via suction • Booster pump for unit filling at high temperatures • Filling via cooling water switchable to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European directives. Other directives and standards are only met if listed in the order confirmation. This technical specification reflects the standard equipment. Customer requirements deviating from the standard will be specified in quotations or order confirmations.

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, šildymo galia: 50 kW (67,98 AG), Wood chip heating system with 50 kW thermal output, already dismantled. Complete with boiler, stoker unit, and discharge system. Kdedpfev Ngq Aex Af Isg