CNC staklės

Binns & Berry Versa Turn 6 x 6000mm CNC Lathe

Sąlyga: naudotas, Gamybos metai: 2001, Tip circle diameter: 1000 mm Root circle diameter: 50 mm Module - max.: 18 mm Module - min.: 1 mm Gear diameter - max.: 1000 mm Gear width: 630 mm Profile height max.: 41 mm Helix angle (left/right) max.: 45° Table diameter: 720 mm Maximum table load: 1500 kg Grinding wheel diameter min./max.: 180 / 400 mm Grinding wheel width: 60 (45/30) mm Grinding spindle speed: 0 - 3100 rpm Total connected load: 30 kVA Chedpfxowp S Ths Admsf

Sąlyga: naudotas, Gamybos metai: 2016, x-travel 6,500 mm y-travel 4,250 mm z-travel 1,500 mm Control HEIDENHAIN iTNC 530 HSCI Table size 7,500 x 3,000 x 300 mm Distance between columns 3,800 mm Rapid traverse x/y/z 30,000 mm/min Tool holder HSK 100 Spindle speed 6,000 rpm Gear stages 2 Motor power 37 kW Codpfx Adsxb Ed Ujmshf Operating hours 28,475 h Spindle hours 12,629 h Tool changer 60-fold Internal coolant supply 36 bar Chip conveyor double Milling head 5-axis milling head OAD Total power requirement 80 kVA Machine weight approx. 85 t Milling head OAD fully water-cooled. - 6,000 rpm without time limitation. - The patented rotation system by Correa with fixed double toothing allows an indexing every 0.02º. As the gearing is not free-moving, maximum rigidity and precision are ensured. - Negative angles up to 45 degrees can be achieved. - Milling spindle mod. FCT (4,000 rpm / 1,893 Nm / HSK 100) - Head extension mod. AL600 (1,500 rpm / 1,298 Nm / ISO 50) - Head changer station for 3 heads - M&H 20.41

Sąlyga: naudotas, Gamybos metai: 2004, Technical Details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Turning length: 4000 mm Distance between centers: 4000 mm Faceplate diameter: 800 mm Control: Siemens 810D Spindle speed: 1 - 1,600 rpm / 2-step Spindle torque: 6,000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse in X-direction: 4 m/min Rapid traverse in Y-direction: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 Size 11) Operating hours / On-hours: to be read out Tailstock quill: ISO MT 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centers: 5,000 kg Max. workpiece weight – unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power requirement: approx. 52 kW Codpou Ix Izefx Admshf Machine weight approx.: 14.0 t Machine dimensions (LxWxH): approx. 2.6 x 9.1 x 2.5 m Cycle turning lathe with Siemens cycle control Motor: 37 kW, rated speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gearbox stages Stage II: Spindle torque 258.9 to 1,364.6 Nm Stage I: Spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electrical cabinet Parat quick-change tool post Coolant system Including various accessories (see photo), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Sąlyga: naudotas, Gamybos metai: 2008, Wheel diameter - max. 900 mm Wheel width 450 mm Module - max. 10 Module - min. 1 Chjdpfxowzmp Uj Admof Number of teeth - min. 8 Cutter diameter x width 192 x 215 mm Distance table / center of milling spindle 910 / 630 mm Distance between center of workpiece spindle and milling spindle 50 / 550 mm Cutter slide travel 200 mm Swiveling range of the milling slide 240 degrees Table diameter 700 mm Table bore diameter 160 mm Milling spindle speed range 25 - 160 rpm Total power requirement 21 kW

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers Chsdpot Ii Rrofx Admof - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Chsdpfx Adouuz Iijmof Control: Charmilles Millenium Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3,000 kg Cutting speed up to 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total system weight: 6,300 kg Upon receipt of order, the machine will be cleaned, fully overhauled, and tested for all functions by us. Options: - Commissioning of the machine at your site - On-site training - Chiller unit - Transport - Clamping rail set

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 1 600 mm, ašies variklio galia: 45 W, veleno greitis (maks.): 1 500 aps./min, X ašies eiga: 1 200 mm, Z ašies eigos atstumas: 900 mm, greitas poslinkis X ašimi: 10 000 m/min, greitasis eiga Z ašyje: 10 000 m/min, CNC Vertical Lathe Daewoo Doosan PUMA V-1200M, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for heavy-duty and industrial sector applications. Main technical specifications: Maximum swing and turning diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Chsdpfx Adswt S Rhsmjf Maximum workpiece weight: 6,000 kg Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning 0.001° Main spindle: Speed: 2 ÷ 320 rpm (2 ranges) Power: 37/45 kW Motorized RAM spindle: Taper: ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 stations, for BT-50 type tools Max tool diameter: Ø 400 mm Max tool length: 450 mm Max tool weight: 50 kg Maximum tool weight in magazine: 600 kg Feed rates: Rapid traverse X/Z axes: 10,000 mm/min Working feed X/Z axes: 3,000 mm/min Included accessories: Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven toolholders Manuals, electrical diagrams, CE declaration A solid and high-performance machine for vertical machining of large, high-precision workpieces.

Sąlyga: naudotas, Gamybos metai: 2009, Planšeto skersmuo: 1250 mm Sūrio aukštis: 1250 mm Valdymas: Fanuc 0i-TD Maks. planšeto sukimo momentas: 12500 Nm Maks. tekinimo skersmuo: 1600 mm Maks. ruošinio svoris: 5000 kg Stalo apsisukimai: 2–300 min⁻¹ X ašis: 1475 mm Z ašis: 900 mm Greitas poslinkis: 10 m/min Veleno kūgis: ISO BT50 Chedowlvifepfx Admef Įrankių vietų skaičius: 12 poz. Bendroji galia: 75 kW Staklių svoris: apie 32 t Užimama vieta: apie 4,7 x 5,8 x 5,5 m CNC karuselinis tekinimo staklės su 12 BT 50 įrankių keitimo žurnalu. Valdymas: Fanuc 0i-TD

Sąlyga: naujas, Gamybos metai: 2022, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 20 m/min, padavimo greitis Z ašis: 15 m/min, bendras svoris: 7 400 kg, veleno greitis (min.): 4 000 aps./min, veleno greitis (maks.): 10 aps./min, Y ašies eiga: 1 500 mm, galia: 22 kW (29,91 AG), DYAS Plattenbohrzentrum - DYAS PDC-1500 Anzahl Bohraggregate: 1 vertikal Chedpfx Adegbfaxsmsf Motorleistung: 22 kW Spindeldrehmoment: 280 Nm Spindeldrehzahl: 10–4.000 U/min Automatischer Werkzeugwechsler (ATC): 16 Plätze Maximales Werkstückgewicht: 760 kg Maximale Bohrleistung: Ø40 mm

Sąlyga: geras (naudotas), Gamybos metai: 2003, X ašies eiga: 14 000 mm, Y ašies eiga: 4 000 mm, Z ašies eigos atstumas: 1 500 mm, veleno greitis (maks.): 2 500 aps./min, padavimo ilgis W ašis: 900 mm, ašies skersmuo: 152 mm, FPT MAR-X 3, Baujahr 2003 CNC SELCA 4045 PLUS DIGITAL, Baujahr 2003. Die CNC kann auf Heidenhain 620 umgerüstet werden. FPT TRT25 Rundtisch, 25 Tonnen. Zweiachsiger Kopf, 144 x 144. Cjdswdm A Hspfx Admshf X, Längsverfahrweg (Ständer): 14.000 mm Y, Vertikalverfahrweg (Schlitten): 4.000 mm Z, Pinolenhub: 1.500 mm W, Spindel Ø 152,4 mm: 900 mm Spindelaufnahme: ISO 50 Spindeldrehzahl: 0 - 2.500 U/min Spindelmotor: 48 kW Automatischer Werkzeugwechsler: 40 Werkzeuge FPT TRT25 Rundtisch, 360.000°: 2.500 x 2.500 mm Rundtisch-Längsverfahrweg: 2.000 mm Tischbelastung: 25 Tonnen