Tekinimo staklės - valdomos pagal ciklą

SEIGER SLZ 850x4000

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Hjdpfex Hgl Hex Aftjfh Technical Data: Max. swing diameter: 525 mm Max. swing diameter over cross slide: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (flexibly equipped with stationary and driven tools) Turret indexing time: - 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel paths: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Būklė: naudotas, Gamybos metai: 2002, Max. turning diameter: 300 mm Max. turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Max. swing diameter: 525 mm Distance spindle nose – turret facing surface: 115 – 690 mm Main spindle speed range: 35 – 4,000 rpm Main spindle drive power: 22 kW Max. torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Max. usable bar diameter: 64 mm Max. chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Tool shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec Driven tool speed range: 25 – 4,500 rpm Driven tool drive power: 3.7 kW Max. torque (driven tools): 35 Nm Counter spindle speed range: 35 – 4,000 rpm Counter spindle drive power: 7.5 kW Max. torque (counter spindle): 57 Nm Max. chuck diameter (counter spindle): 150 mm X-axis: 190 (185 + 5) mm Z-axis: 575 (580 + 5) mm Counter spindle travel B: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed rate X/Z: 0 – 5,000 mm/min Feed rate C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirements: approx. 5.0 x 3.0 x 2.5 m Hfjdjxmaguopfx Afteh CNC Turning and Milling Center MAZAK – Super Quick Turn 250 MS - Main and sub spindle - Driven tools - C-axis

Būklė: naudotas, Gamybos metai: 1992, Technical details: X-travel: 800 mm Y-travel: 550 mm Z-travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Spindle speed range: 0–600 and 600–4000 stepless rpm Feed rate: 1–3000 mm/min stepless Rapid traverse: 6 m/min Table clamping surface: 1100 x 600 mm Table feed: 1–3000 mm/min stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH): approx. 2.9 x 2.2 x 2.5 m Hsdpou Nda Esfx Aftjfh Additional technical specifications: - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang min./max.: 200 / 750 mm Equipment: - Coolant tank with pump - Handheld control unit - Heidenhain linear measuring system

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Stock machine "NEW" – available at short notice! (subject to prior sale) Control Unit: FANUC 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC storage LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel Ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear Guides & Speeds: Ball guides on X/Y axis Roller guides on Z axis Hfjdoifn N Nepfx Afteh Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate when milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine (CAM-Type) / Changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent empty slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW 15,000 rpm direct drive spindle Spindle oil cooler Coolant, Chip, and Compressed Air Management: Coolant system incl. 300-liter tank and pumps External coolant around the spindle Chip augers right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other Features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger on control cabinet Auto power OFF function Hand tool set Signal beacon Transformer 400 VAC, 50 Hz CE Declaration of Conformity in accordance with European directives Electrical and Pneumatic Requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Special Equipment Included: Spindle: - Direct drive spindle SK-40, 15,000 rpm - Drive power (30min/continuous): 18.5 / 15 kW, (FANUC motor) Tool Magazines / Changers: - Drum magazine with 30 stations, DIN69871, SK-40 Rotary or Additional Axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, Chip, and Compressed Air Management: - Bed flush - CTS coolant pump with 20 bar pressure for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip trolley (chip discharge to front on left machine side) Measuring and Monitoring Systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in the machine, incl. mount - Auto door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown with RoboJob Mill Assist 25kg (year 2025 – NEW) - Full enclosure - Double gripper Available immediately

Gamybos metai: 2024, būklė: naujas, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Hodpoftdh Iefx Aftsfh Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at our showroom in Staufenberg by prior appointment at any time. Additional machines are available for demonstration at our facility in Staufenberg. Further information is available upon request.

Gamybos metai: 1960, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and center of gravity offset 300 mm: 10 t Load capacity with vertical faceplate position and center of gravity offset 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically steplessly adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range up: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor level: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t Hfjdpfxecblc Ss Aftsh

Būklė: geras (naudotas), Aprašymas: Staklės yra geros techninės būklės, iš anksto susitarus galima išbandyti. Naudojimas: krumpliaračių (tiesių, nuožulnių, veleninių) gamyba. TALPA: maksimali krumpliaračio skersmuo: ≈ 400 mm maksimalus modulis: dažniausiai 6–8 (naujų versijų iki 10) maksimali krumpliaračio plotis: apie 275–400 mm VĖRŽLĖ IR ĮRANKIS pjovimo greitis: iki ~500 aps./min įrankio skersmuo: apie 160–240 mm variklio galia: apie 15–17 kW STALAS stalo skersmuo: ≈ 380–400 mm skylė stale: apie 80 mm apkrova: iki ~1000 kg MATMENYS IR SVORIS Hedpfx Aey Amiqjftefh ilgis: ~4680 mm plotis: ~2395 mm aukštis: ~2515 mm svoris: apie 5–6,5 t (klasikinė versija)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 655 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 36 m/min, greitas poslinkis Y ašis: 36 m/min, greitasis eiga Z ašyje: 30 m/min, valdiklių gamintojas: Fanuc, valdiklio modelis: Fanuc 0i-MD, ruošinio ilgis (maks.): 400 mm, ruošinio plotis (maks.): 355 mm, ruošinio svoris (maks.): 250 kg, bendras aukštis: 3 120 mm, bendras ilgis: 2 995 mm, bendras plotis: 2 975 mm, sukamosios stalo skersmuo: 350 mm, veleno greitis (min.): 80 aps./min, veleno greitis (maks.): 12 000 aps./min, aušinimo skysčio tiekimas: 15 juosta, ašies variklio galia: 15 W, veleno nosis: ISO 40, įrankių magazino lizdų skaičius: 40, įrankio ilgis: 270 mm, įrankio skersmuo: 80 mm, įrankio svoris: 8 g, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Naudotas penkių ašių vertikalus apdirbimo centras su CNC FANUC 0i-MD Hfjdpfx Afjx N Tm Netoh

Būklė: naudotas, Gamybos metai: 2012, mašinos/transporto priemonės numeris: MB0001-000031, X ašies eiga: 2 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 1 200 mm, greitas poslinkis X ašimi: 12 m/min, greitas poslinkis Y ašis: 12 m/min, greitasis eiga Z ašyje: 12 m/min, padavimo eiga Y ašimi: 6 mm, X ašies padavimo greitis: 6 m/min, Y ašies padavimo greitis: 6 m/min, padavimo greitis Z ašis: 6 m/min, valdiklių gamintojas: FANUC, valdiklio modelis: 32i Model A, ruošinio skersmuo (maks.): 2 550 mm, ruošinio svoris (maks.): 7 000 kg, bendras aukštis: 4 200 mm, bendras ilgis: 5 540 mm, bendras plotis: 5 930 mm, stalo plotis: 1 400 mm, stalo ilgis: 1 600 mm, bendras svoris: 29 000 kg, veleno greitis (maks.): 3 000 aps./min, atstumas nuo stalo centro iki veleno galo: 1 750 mm, ašies variklio galia: 26 W, veleno nosis: BT50, įrankių magazino lizdų skaičius: 60, įrankio ilgis: 600 mm, įrankio skersmuo: 250 mm, įrankio svoris: 30 g, B ašis: 1 laipsnis Valdymas: FANUC 32i-Model A Atstumas nuo veleno nosies iki stalo viršaus: 0 - 1500 mm Atstumas nuo veleno nosies iki stalo centro: 550 - 1750 mm Staklių matmenys: 5540 x 5930 x 4200 mm Staklių svoris: 29000 kg Didžiausias pjovimo padavimo greitis: 6 m/min Didžiausias įrankio skersmuo: 250 mm Didžiausias įrankio ilgis: 600 mm Didžiausias įrankio svoris: 30 kg Didžiausias ruošinio svoris: 7000 kg Greitosios padavimai WXYZ: 6 x 12 x 12 x 12 m/min Veleno skersmuo: 110 mm Veleno variklio galia: 26/22 kW Veleno apsukos: 3000 aps./min. Apsisukimo diametras: 2550 mm Hfodjxm Sxvspfx Aftsh Stalo dydis: 1400 x 1600 mm Įrankių keitimo talpa: 60 pozicijų Įrankio tipas: BT50 Judėjimai XYZ: 2000 x 1500 x 1200 mm W ašis: 500 mm Aušinimo sistema, žemos įtampos apšvietimas, drožlių transporterio konvejeris, ilgos pasiekiamumo dešinio kampo frezavimo galvutė, įrankio ilgio matavimo jutiklis, Renishaw ruošinio matavimo jutiklis, visiškai uždari staklių apsaugos.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 9 000 h, Funkcionalumas: visiškai funkcionalus, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without re-clamping: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Tool holder/Parting-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/Sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Space requirement (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) Hedpfx Aoxf Hqqeftsfh - 3 driven tools for cross machining - 3 driven tools for face machining on main spindle - 3 driven tools for face machining on sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x rear side machining units (AGW) - Yellow warning light - Interior workspace light - Workpiece conveyor belt - FMB Turbo 3-26 bar loader - Option for long components - Spindle flushing system (Scherzinger pump)