Purškimo patalpa su oro tiekimo lubomis

Berkmann

Sąlyga: naudotas, Gamybos metai: 1996, Used machine Iedpsxwz H Rsfx Af Istb Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate according to the principle of displacement flow. This means that a negative pressure is created on the wall side of the room, while on the opposite side, the supply air unit creates a positive pressure. - Nearly all of the room air flows in a directed and low-turbulence manner from the supply air side towards the exhaust air side. - Paint mist generated in the airflow area is captured and extracted. - With Berkmann extraction systems, air is extracted throughout the entire area, not just at the intake area of the spray wall as with conventional systems. - This allows for the coating of larger parts as well. - It is also not necessary to work directly in front of the extraction device. - Thanks to the patented "gap extraction" system, high extraction velocities are achieved at all sides (including the floor area, where solvents accumulate). - The special arrangement makes it possible to accommodate extremely large filter areas, resulting in exceptionally long filter lifespans. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, allowing for energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation device - System is installed beneath the floor with grating covers - Grating dimensions: approx. 3500 x 3400 mm - Device filter area: approx. 3.7 m² - Supply air unit: approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation device: approx. 3000 m³/h air extraction rate - Motor: 1.1 kW - With supply air duct system featuring 4 large-area ceiling filters with EX-rated lamps - With control cabinet and microprocessor control - With used Kremlin paint spray unit Price does not include disassembly, removal, or collection on site Availability: approx. mid-April 2026 Location: Hesse

Sąlyga: naudotas, Gamybos metai: 1985, Svoris: apie 3000 kg Matmenys: apie 3700 x 2000 x 1600 mm Sandėliavimo vieta: Nattheim Itodpfx Afsvvi Tto Isb

Sąlyga: naudotas, Gamybos metai: 2004, Kompaktiška pusiau automatinė dantytų jungčių linija, sudaryta iš: Ijdpfx Aow Nbacef Ijtb - Frezaus PJ 150/500 - Perdavimų stalo rankiniam perdavimui - Vieno kanalo preso PJ 7/6100 li Frezaus: 2 pakeliai/min Presas: 2 ciklai/min Įeinantis ilgis: 150–700 mm Galutinis ilgis: maks. 6 100 mm

Sąlyga: naudotas, Weinig Unicontrol 10 (UC 10) angle processing system for the manufacturing of windows, components, and doors. Suitable for frame, series, or individual part production, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units: 1. Cross-cut saw, NC-axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC-axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC-axis, ø 50 mm, 11 kW, Clamping length: 400 mm 4. Profiling spindle 1, NC-axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Horizontal profiling unit from above, 3 kW 6. Profiling spindle 2, NC-axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC-axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling unit, vertical right, 3 kW 9. Profiling unit, vertical right from above, 3 kW 10. Profiling unit, horizontal from below, NC-axis 3 kW Isdev Ag Tdopfx Af Istb - Double part package - Counter-milling package with counter-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled stop for length - Studio window setup - Unit for edge rounding from below with cross-cut saw - Glazing bar support rail - Including extraction pipe system - Including Oertli tool set - Further technical data and tool drawings available upon request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Visapusiško durų rėmų ir apdailos juostų apdirbimo staklės Įrenginys atlieka pjovimą 0°–45°, gręžimą 45°, ekscentrinių jungčių/klipų gręžimą apdailos juostoje, lizdo-plokštelės-kontrplokštės frezavimą, gręžimą rankiniam įsukamų vyrių montavimui. Staklės komplektuojamos su kompiuteriu, kuris automatiškai valdo visus reguliavimus ir darbo ciklą. Ašys varomos bešepetiniais varikliais, visi judesiai vykdomi aukštos kokybės linijiniais guoliais. Didžiausias darbo lauko ilgis: 3 000 mm Mažiausias darbo lauko ilgis: 480 mm Didžiausias detalės aukštis/storis: 98 mm Didžiausias detalės plotis: 280 mm Agregatai kiekvienoje pusėje: 2 Itjdpow Sd Uusfx Af Isb Pjovimo agregatai kiekvienoje pusėje: 1 Gręžimo agregatai kiekvienoje pusėje: 1, su 5 grąžtų galvute Pagrindinis agregatas: 1 Frezavimo agregatas su 2 velenais Pakeliami agregatai su 45° kampu Kampo reguliavimas – programuojamas valdiklis Plotis reguliuojama – programuojamas valdiklis CE atitikties sertifikatas Svoris: 2 500 kg

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm Iodpot R T Hcsfx Af Istb - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: naudotas, ALREADY DISMANTLED ‼️ IMMEDIATELY AVAILABLE ‼️ 🔥 Gilles 300 kW Wood Chip Boiler for Sale – Reliable Industrial Biomass Technology! 🔥 Industrial-scale heating solution with Austrian precision! The Gilles 300 kW boiler is the ideal choice for larger facilities, sites, grain dryers, or central heating systems. Main features: Itjdjp Am Rgjpfx Af Isb 🌲 Fuel types: Wood chips, pellets, biomass – wide fuel versatility ⚡ 300 kW heating capacity – reliable and efficient for heavy-duty applications 🔄 Automatic feeding, combustion control, ash removal – minimal labor required 🧠 Modern controls, optimized combustion ♻️ High efficiency, low emissions 🇦🇹 Gilles = Austrian quality, industrial reliability 💥💰 PRICE: EUR 9,900 – GOOD CONDITION, READY FOR INDUSTRIAL USE! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Industrial boilers, biomass solutions, experienced and competent.

Sąlyga: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Itedpfjvu Hfqox Af Iob Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Sąlyga: paruoštas naudoti (naudotas), Parduodu nuotraukose matomą transporterį, ilgis apie 8 m. Juostos plotis 0,3 m. Galiu pasirūpinti transportu. Itedpfx Afer Nvx Uo Iob

Sąlyga: naudotas, X ašies eiga: 2 000 mm, Y ašies eiga: 1 400 mm, Z ašies eigos atstumas: 1 250 mm, ašies skersmuo: 110 mm, X ašies eiga: 2000 mm Y ašies (vertikali) eiga: 1400 mm Z ašies eiga (kolona): 1250 mm W ašies eiga (velenas): 710 mm Stalo matmenys: 1400 x 1600 mm Stalo apkrova: 8000 kg Velena apsukos: 10 – 2000 aps./min. Velena tvirtinimas: ISO 50 Greita eiga X Y Z: 10 000 mm/min Isdsx Da Slspfx Af Istb CNC valdymas: HEIDENHAIN TNC 426 Įrankių keitiklis su 60 pozicijų