Juostiniai pjūklai

BEHRINGER HBP 530-1104 GA

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 500 mm, Siūlome šią atnaujintą BEHRINGER HBP530-1104 GA-PC juostinę pjūklą, pagamintą 1996 m. Retrofit (valdymo sistema) atliktas 2023 m. Gamintojas: BEHRINGER Modelis: HBP530-1104 GA-PC (iki 500 mm) Bledpfx Absya Udiefoc Pagaminimo metai: 1996 Jei turite klausimų ar reikia daugiau informacijos, rašykite mums žinutę.

Sąlyga: geras (naudotas), Gamybos metai: 2001, Manufacturer: BEHRINGER Model: HBP 530 A Year of manufacture: 2001 Specifications Bljdpeu U Narsfx Abfjc Metric US Standard Capacity 90° 530 x 530 mm Min. cutting length 40 mm Max. cutting length 17 - 110 mm Power 12 kW Chip conveyor Yes Dimensions (approx.): Length 4000 mm Width 2250 mm Height 3270 mm Weight 4400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith; however, accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, plieno lakšto storis (maks.): 5 mm, Hydraulic swing bending machine Make: HOCHSTRATE Model: 3000/5 Year of manufacture: 1998 Technical specifications Manufacturer: HOCHSTRATE Model: 3000 x 5 Year: 1998 Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm²) Motor power: 7.5 kW Space requirements: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Blsdpfxsvrxnxs Abfjc Equipment • PLC control • 30 mm bending bar All information subject to change. A demonstration is possible at any time in our showroom.

Gamybos metai: 2003, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBUT136, ! Bargain Price ! Price from €1,150 R.Stahl Single-Girder Suspended Crane | Bridge Crane | Crane Runway | Indoor Crane | Gantry Crane Load Capacity: 250 kg 7 cranes available: 4: Steel Suspension Crane, 250 kg capacity, width 6.35 m, gauge 5.6 m 5: Steel Suspension Crane, 250 kg capacity, width 2.65 m, gauge 1.9 m 6: Steel Suspension Crane, 250 kg capacity, width 4.85 m, gauge 4.35 m 7: Steel Suspension Crane, 250 kg capacity, width 2.90 m, gauge 2.35 m 9: Steel Suspension Crane, 250 kg capacity, width 6.0 m, gauge 5.5 m 10: Steel Suspension Crane, 250 kg capacity, width 1.03 m, gauge 0.74 m (1,150 Euro) 11: Steel Suspension Crane, 250 kg capacity, width 1.65 m, gauge 1.25 m Gauge can be adjusted, end carriages are bolted with 8 bolts. Bjdpfoigl R Rex Abfelc Runway rails (IPE 200 – not available) Trolleys are adjustable to fit the girder dimensions. Including complete control system, pendant control via pushbutton station. All cranes are fully electrically traversable in all 3 axes Lifting height/hook travel approx. 4 m Connection: 400V 16A, Year of manufacture: 2003 Very good condition, systems were only used for maintenance – hardly used Shipping by freight forwarding, collection preferred Location: 75053 Gondelsheim Please inquire for shipping costs by postcode – we will provide you with a prompt, non-binding offer!

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Bjdpfsfg E Hpjx Abfslc Price on request.

Gamybos metai: 2020, Sąlyga: labai geros būklės (naudotas), 2 Cat EK DMR Bedpjtu Nmdjfx Abfslc

Gamybos metai: 1991, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 07282, Offer 22336 Technical Data: - Max. working width: 3030 mm - Max. sheet thickness without pre-bending: 4 mm Bledpfx Abemdqlljfjc - Max. sheet thickness with pre-bending: 3 mm - 3 driven rollers - Roller diameter top / bottom: 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Required space: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - with pre-bending function - Rear roller adjustable at an angle - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rollers - Forward and reverse operation - Separate control panel

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Blsdjiuznuepfx Abfec Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Sąlyga: geras (naudotas), Used radial drilling machine SASS Mod. TRM 2200 Excellent condition, fully operational. Equipped with cube Maximum drilling diameter in solid cast iron: 100 mm (20-22) Maximum drilling diameter in solid steel R=60: 80 mm Spindle diameter (sliding quill): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor – rpm: 18 ÷ 1600 Automatic feeds Maximum arm outreach (column edge to spindle axis): 2230 mm Bsdeikqz Sepfx Abfjlc Minimum and maximum drilling radius: 660 ÷ 2505 mm Head travel on arm: 1845 mm Vertical arm travel: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Base plate height: 260 mm Base dimensions: 2490 x 1230 mm Spindle motor: 11 HP Weight: 9000 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, keliamoji galia: 6 000 kg, kėlimo aukštis: 30 000 mm, kuro tipas: dyzelinas, stiebo tipas: teleskopinis, šakių ilgis: 1 200 mm, pavaros tipas: Diesel, Rotating telescopic handler Bljdpfx Aew Eqdwjbfjc Mast type: Telescopic Technical condition: New Front tires type: Pneumatic Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 80 - 100% Description: The machine is UVV-inspected. A&M pallet fork carrier set including 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t lifting hook. 3rd valve, 4th valve, heater, road approval (StVZO), full cab, CE certificate, PEGASUS60.30St.V TÜV/Dekra approval 20 KM/H construction machinery axles with automatic 45% differential lock on the second axle additional platforms for stabilizers, pair of LED headlights on the fixed boom, 7-pin socket on upper structure, pre-installed car radio set with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick, right joystick with integrated FNR and electrical pre-installation for attachments with 3 movements, set of 18R22.5 XF MICHELIN off-road tires, semi-automatic climate control, removable front windshield guard for the cab, kit for driving with upper structure rotated 180°, boom vibration damping, integrated reversing camera with 7" display (not compatible with 7" monitor with digital camera on the telescopic boom), telematics kit (DTS), road headlights (front) with LED daytime running lights, cab with laminated glass windscreen, pre-installation for Woodcracker saw, three-sided personnel basket 120x240 cm, hydraulically extendable to 420 cm, load capacity 300 kg, pallet fork carrier plate including A&M lifting hook, width 1,_ pallet forks FEM4A, tines: 150x50 x 1.2m length, load capacity.