Keturių krypčių krautuvas

Baumann EVS40/12-11/45 ST LK8,5

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Double edger and trimming circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Pass-through width 1000 mm. Cutting height 125 mm. Feed rate frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment is hydraulic, electronic positioning control with the following setting options: stepless, cm indexing and switchable to 2 cm indexing. Cutting width between the flanges 24 - 440 mm. 10 configurable fixed dimensions, direct input of dimensions in mm. Constant dimension addition, shrinkage addition by percentage. Spreader wedge pair 1x zero line, 1x separately hydraulically adjustable, with electronic positioning control. Spreader wedge opening 48 - 600 mm. Chain bed on the cutout side. 90 kW motor with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 splitter blades. Electrical control cabinet with power section and PLC control. Operator panel. Lath bushing with 403 mm clamping length. Adjustable and zero bushing. Properly dismantled and loaded free on truck. Ksdpfown D Izsx Af Ijdg

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel - External roller conveyor for transporting the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets Kedecggy Sjpfx Af Iedg - Operating capacity (cycles/min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Ksdpfsfi Tg Hsx Af Isdg Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Sąlyga: labai geros būklės (naudotas), pjovimo plotis (maks.): 700 mm, pjovimo aukštis (maks.): 120 mm, Right-hand machine, machine no. 188 hydraulic width adjustment, electrically adjustable Kdedpfx Aov Raqxef Iog Infinitely variable feed rate adjustment 0 - 80 m/min Drive motor 37 kW with V-belt pulley and motor tensioning rail Various saw heads, spacer rings, and saw blades Infeed table with individual stands Fixed outfeed table The machine has been completely refurbished and is in top condition.

Sąlyga: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Kedpjd Rg Dpjfx Af Ijdg Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW

Sąlyga: labai geros būklės (naudotas), Brookhuis moisture meter for crosswise pass-through operation, equipped with 3 sensors. Kedpohlcu Nsfx Af Ijdg

Sąlyga: labai geros būklės (naudotas), Panel loading at 15 cycles per minute, complete with motorized roller conveyors Loader Ksdpfehv Sttex Af Iedg

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse transversely movable by 180° (horizontal) - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front protective fence, movable - Separate control cabinet and operator panel - External roller conveyor for stacking panels from destacking unit - External driven roller conveyor from destacking unit, also with belt for transfer at 90° angle of the panels - Operating capacity (cycles/min): 12-15 - Panel thickness (min/max) mm: 10 - 40 - Min. panel dimensions mm: 250 x 320 - Max. panel dimensions mm: 1200 x 3000 - Total connected load kW: 11 Kdedpfx Afod Tyvxo Iog

Sąlyga: geras (naudotas), Gamybos metai: 2000, Schroeder Mosaic Press 160 mm. Bonding Patterns – brick / English bond, panel size 640x274 mm and halves 640x137 mm, glue application in 6 variants: Kodpfjr Iyvbjx Af Iodg - single brick, 50% offset - double brick, 50% offset - triple brick, 50% offset - single brick, 25% offset - double brick, 25% offset - triple brick, 25% offset

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups OPTIONAL: No. 2 external roller conveyors (floor-mounted) for loading stacks of panels onto the loading station No. 1 external motorized roller conveyor (for receiving panels from the loading station) Kedpfx Ajflc T Sof Iodg Separate electrical control cabinet Electronic control system Perimeter safety fence with safety mats Total connected load: 17.7 kW Operating capacity (cycles / min): approx. 16-20 Panel thickness (min/max) mm: approx. 10-50 Min. panel dimensions mm: approx. 250 x 320 Max. panel dimensions mm: approx. 1200 x 3000