Šoninis krautuvas

Baumann DX40/12/45

Būklė: naujas, Table width 3000 mm Table length 1500 mm Torch heads 1 Control CNC Feed rate 20,000 mm/min Total power requirement 15 kVA Space requirement approx. 4.5 x 2.5 m Bsdpjpm U U Njfx Af Aslg * Heavy machine bed with precision guides for smooth machine travel * Cross carriage with ball bearings, offering height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting area ensures maximum precision * Automatic height detection and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Installation or relocation of the machine possible via plug & play method using forklift, pallet truck, or crane * 3-sided access to cutting area thanks to cantilever design SATOTEC Extraction Table: The SATOTEC table system features a robust table construction for a maximum cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is equipped with replaceable 3 mm flat-bar slats, mounted at a 45° angle. The spacing between the slats is 50 mm. Power Source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, can be increased with ProPierce Technology * Marking, grooving, and scribing of coated metallic materials * Inverter power source with digitally managed, fully electronic process cycle * Integrated cooling system with semi-automated filling and draining Gas Control: Fully automatic, processor-controlled plasma universal gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction System TEKA EcoCube 5.5 kW Filter medium: dry, fat-free or oil-free dust / fumes Filter area: 100 m² (4 cartridges @ 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (per BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz Current consumption: 11.5 A Voltage type: 3Ph+N+PE Fan installation: on the unit, incl. silencer duct bend, right side Motor control: frequency inverter Noise level: 75dB(A) + max 10 dB(A) during cleaning pulse Intake nozzle: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light grey - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with cable gland - Compressed air connection with hose nozzle d=8mm - System equipped with grounding bolt - Cables in UL version - EATON frequency inverter installed on the left in attached control cabinet

Būklė: geras (naudotas), Pramoniniai robotai Gamintojas: Kuka Bedpstuc U Rjfx Af Aelg Tipas: KR6, KR6-2, KR6arc Tipas: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Visi tipai su KRC2ed05 valdikliu Kuka KR6 KRC2ed05 gamybos metai 2006 Kuka KR6-2 KRC2ed05 gamybos metai 2011 Kuka KR6arc KRC2ed05 gamybos metai 2006-2007 = keli egzemplioriai sandėlyje Kuka KR16L6 KRC2ed05 gamybos metai 2009 Kuka KR16L6-2 KRC2ed05 gamybos metai 2011 Kuka KR16 KRC2ed05 gamybos metai 2007-2009 = keli egzemplioriai sandėlyje Kuka KR16-2 KRC2ed05 gamybos metai 2010-2012 = keli egzemplioriai sandėlyje Kuka KR16-2 Speed KRC2ed05 gamybos metai 2012 = keli egzemplioriai sandėlyje Kuka KR16-2 Foundry KRC2ed05 gamybos metai 2012

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: Bsdpfx Aou R Szaof Aslg - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Būklė: naudotas, Gamybos metai: 1986, Kampinis plienas 120 x 13 mm Skylių štampavimo mašina: spaudimo galia 60 t Skylių štampavimo mašina: atstumas nuo krašto 510 mm Skylių štampavimo mašina: talpa (skersmuo x storis) Ø 27 iki 17 mm Lakštų žirklės: plokščia medžiaga 500 x 14 mm Bodpfx Afet D Nz As Aslg Lakštų žirklės: plokščia medžiaga 400 x 16 mm Lakštų žirklės: plokščia medžiaga 180 x 20 mm Lakštų žirklės: plokščia medžiaga 120 x 21 mm Lakštų žirklės: plokščia medžiaga 100 x 22 mm Bendras galingumo poreikis 7,5 kW Mašinos svoris apie 2,5 t Užimama vieta apie 1,8 x 0,9 x 1,8 m - Hidraulinės profiliuoto plieno žirklės – kombinuotos -

Būklė: naudotas, 7 vnt. lankstymo įrankių šarnyriniams lankstymo presams, ilgis 3000 mm Bodjb D Ry Rjpfx Af Aslg

Būklė: naujas, galia: 4 kW (5,44 AG), Profesionali šlavimo mašina su hidrauline ratų ir šepečio pavara. Optimalus darbinis plotas dėl siauro pločio, manevringumo ir svorio paskirstymo. Šepečio švytuoklė nelygiajam paviršiui. Tinka vidutinio dydžio plotams +/- 3000 m². Dideli ratai geram sukibimui ir prošvaisai. 5,5 AG Honda variklis, didesnis variklis ar dyzelinis – pagal užsakymą. Įvairios parinktys: surinkimo talpa, mėšlo stūmiklis, sniego stumdytuvas, šoninis šepetys, greičio reguliavimas, važiuojama sėdynė ir kt. Bodpfx Afox I Hrij Aolg Būklė: Nauja

Būklė: reikia remonto (naudotas), Gamybos metai: 1993, mašinos/transporto priemonės numeris: 624/9, spaudimo jėga: 10 t, darbinio aukščio: 805 mm, bendras ilgis: 1 900 mm, Pleištinės briaunų sujungimo presas Taktinis presas pleištinėms briaunų jungtims Pleištinių briaunų presas Presavimo jėga 10 t Medienos plotis: 80 - 300 mm Medienos storis: 18 - 100 mm PAPILDOMAI su hidrauliniu agregatu Bodpfxot Sc T Ie Af Aslg

Būklė: naujas, Load capacity 500 kg Number of suction pads 6 Diameter of suction pads 215 mm Vacuum Lifter VH 6-500 for horizontal transport of smooth, dry, and airtight panels. Robust load-bearing construction made of steel, painted in RAL 2000 with low dead weight. Comprising: - 1x Galvanized longitudinal beam with a length of 2,400 mm - 3x Galvanized cross beams with a length of 1,000 mm each - 6x Spring-loaded, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the seal can be replaced separately from the metal carrier, cost-effectively and without tools - 6x Ball valves to shut off individual suction cups, allowing for the lifting of smaller panels without having to move cups or beams - 1x Spiral connection cable, small coil: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling * routed alongside the load chain to the lifting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control panel (necessary if the vacuum lifter is powered via the crane’s trolley and there is no neutral conductor) - Operating handle extendable to 1,000 mm from the center of the beam. Stable metal pocket for your crane control unit included at no extra charge. - Operation "Suction / Release" via manual slide valve: Bledpfjq Sc Auex Af Ajg The wear-free and very robust manual slide valve ensures safe suction and release upon activation of the release button. (Double release according to EN 13155) - Control and safety devices for the vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning system with acoustic signal annunciator * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-action release for unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easy-to-understand documentation Warranty against material and manufacturing defects for one year in single-shift operation (excluding wear parts). Initial inspection UVV 18, VBG 9a with CE certificate of conformity according to EN 13155 - Packaging suitable for truck transport.

Būklė: naudotas, Gamybos metai: 2004, Sato slicer for sale Bedsvx N I Nopfx Af Aelg

Būklė: naujas, Gamybos metai: 2026, Series machine MBM • Easy start in the engine performance class • Designed for smooth and efficient single-person operation • Produce complete profiles in one operation and precisely repeat them at any time Bjdjwf Hghjpfx Af Aslg • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorized back gauge 6-750 mm • Foot switch • 16 A connection plug with 5 m cable (within the EU) • Connection voltage: 3 x 400 Volts, 50 Hz (within the EU)