Džiovykla 2x100 m³ + garų generatorius 30 m³

Baschild TDK

Gamybos metai: 2022, veikimo valandos: 20 h, Sąlyga: beveik kaip naujas (parodų įrenginys),

Sąlyga: naudotas, ALREADY DISMANTLED ‼️ IMMEDIATELY AVAILABLE ‼️ 🔥 Gilles 300 kW Wood Chip Boiler for Sale – Reliable Industrial Biomass Technology! 🔥 Industrial-scale heating solution with Austrian precision! The Gilles 300 kW boiler is the ideal choice for larger facilities, sites, grain dryers, or central heating systems. Main features: 🌲 Fuel types: Wood chips, pellets, biomass – wide fuel versatility ⚡ 300 kW heating capacity – reliable and efficient for heavy-duty applications 🔄 Automatic feeding, combustion control, ash removal – minimal labor required 🧠 Modern controls, optimized combustion ♻️ High efficiency, low emissions 🇦🇹 Gilles = Austrian quality, industrial reliability 💥💰 PRICE: EUR 9,900 – GOOD CONDITION, READY FOR INDUSTRIAL USE! 💰💥 Gjdpfsp Am Rgox Abdsil 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Industrial boilers, biomass solutions, experienced and competent.

Gamybos metai: 2009, veikimo valandos: 214 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Thin-cut frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical data: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights for different saw lengths: Saw length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) Saw length 420 mm → cutting height: 30–128 mm, 45–128 mm Saw length 500 mm → cutting height: 80–210 mm, 45–210 mm Saw length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With double planer: +250 mm Block height difference: ±0.5 mm Cutting width for side fence: 140 mm 🔹 Additional technical data: Cutting width for central fence: 2 × up to 60 mm Optional groove width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss per cut (kerf thickness): from 0.9 mm Saw blade service life (depending on wood): ~40 hours Machine weight: - Basic: 3000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): Gjdpsw Dp Ufsfx Abdoil - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator’s workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3200 m³/h (30 m/s) Working air: - Min. 6 bar - Consumption: 200 l/min Lubrication: Central, with guide monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Supply cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Gamybos metai: 2001, veikimo valandos: 123 h, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 123, Chip silo, diameter: 5 m, height: approx. 8 m, net capacity: 42 m³. Suitable for the storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time, by prior arrangement. Giodpeftdv Uefx Abdjl

Sąlyga: naudotas, Presssystem: Kontinuierlich / Kalander Hauptlieferanten: Bison / Berstorff Konstruktive Leistung: 160 m³/Tag Erreichte Kapazität ca.: 200 m³/Tag Effektive Betriebszeit: 23 Std./Tag Referenzdicke: 3,2 mm Max. Bruttobrettbreite: 2500 mm Max. Nettobrettlänge: 2440 mm Max. Nettobrettbreite: unbegrenzt Min. Nettobrettbreite: 1220 mm (teilbar) Min. Brettdicke: 2,0 mm Max. Brettdicke: 10 mm Elektrisches System: 380 V, 50 Hz Giedpfx Asul H Nmsbdol Baujahr: 1985 Hauptmodernisierungen: 2007-2009, 2016 Betrieb bis: Mai 2018

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, L’impianto Spanner è composto dal cogeneratore e dal riformatore. Il riformatore, il cuore dell’impianto a cippato, produce gas naturale di legno dai cippati attraverso un processo controllato. Questo gas viene utilizzato per alimentare il cogeneratore. L’energia termica prodotta può essere utilizzata per il riscaldamento di edifici, impianti di essiccazione o reti di riscaldamento, mentre l’energia elettrica viene immessa in rete. Gedpfx Abswvhf Todeil Modello HK45 Potenza elettrica 45 kW Potenza termica 120 kW Consumo di cippato 45 kg/h Requisiti per il cippato: Dimensione G30-G40 Umidità massima 15% Polveri sottili (

Sąlyga: naudotas, Gamybos metai: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic detection and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Gedowtgcxopfx Abdeil Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fuse protection: 25 A Condition: used

Sąlyga: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Gijdpfxjgwbbqj Abdol Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Wood chipper for sawmill offcuts LINDNER type T 400/140-2 – after technical inspection – in very good condition – for technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm Giedjr Ak Rgspfx Abdjl rotor length: 400 mm main drive motor power: 33 kW feed drive motors power: 2 x 1.5 kW number of knives: 2 pcs screen dimensions: 60 mm x 90 mm feed rollers in very good condition feeder drive motor power: 1.5 kW feeder length: 4200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2000 kg

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Giodjw Sy T Hspfx Abdjl Location: Nattheim