Rąstiniai kiemo įrenginiai

Baljer & Zembrod RSTW 1658

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Dkjdpfxsfg Rlce Ai Sen Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Screen area: approx. 1,300 x 4,000 mm Dedpfx Aijtpgvxo Sekn new semi-mobile steel construction

Būklė: geras (naudotas), Radio-controlled quick-clamping carriage, fully hydraulic, with hydraulic auxiliary carriage. Track gauge 840 mm. Control panel and electrical switch cabinet. Dkjdpfx Aod Nqrqei Son

Gamybos metai: 1980, būklė: geras (naudotas), A used, very well-preserved cycle-controlled lathe from Weisser Heilbronn with SIEMENS control system. Dodsgyy I Aopfx Ai Sskn Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Cross travel X-axis: 350 mm Longitudinal travel Z-axis: 1850 mm Spindle nose DIN 55022 Size 8 Number of spindle speeds: 18 (14 – 1400 rpm) Spindle bore: 71.5 mm Diameter of front bearing: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW 400V 50Hz Max. permissible spindle torque: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MT 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the centre, size "C" 4-position turret behind the centre Tool holders Coolant system Follow rest, pneumatically operated Technical data and specifications are subject to change without notice. Video conference via WhatsApp available by appointment.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments Dkjdpfx Ash Ek Daei Sjn - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Hundegger Speed Cut SC1 CNC 2005 metų, geros techninės būklės, ieško naujo savininko. Puikiai tinka gaminti vinių plokščių stogams. Dkedpsxftalefx Ai Ssn Vaizdo įrašai rodo įrenginį veikime.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, mašinos/transporto priemonės numeris: 11470, Funkcionalumas: visiškai funkcionalus, ruošinio plotis (maks.): 450 mm, Hundegger K2 in very good condition, overhauled, assembled, and commissioned by Hundegger. Since then, it has only run for approximately 20 hours, was professionally dismantled, and has been stored in a heated hall. Djdpfxjwhpavj Ai Sjkn

Būklė: naudotas, Gamybos metai: 2019, MAKSIMALUS SMULKINIMO SKERSMUO 250 MM VARIKLIO GALIA 75 kW SMULKINTUVO BŪGNO PLOTIS 640 MM SMULKINTUVO VOLELIO SKERSMUO 660 MM VIRŠUTINIO VOLELIO PLOTIS 640 MM Dedpoyffi Tsfx Ai Sekn MAKSIMALI VIRŠUTINIO VOLELIO ANGA 600 MM PEILIŲ KIEKIS ANT MAŠINOS: 3 PADAVIMO VOLELIAI: 2

Gamybos metai: 2024, būklė: naujas, Overband Plate Magnet with Cleaning Mechanism Design in tightly welded stainless steel (VA 1.4301) Dkedehfwmdepfx Ai Ssn Including cleaning drawer Dimensions: 800x500x180mm 4 pcs M16 eye bolts on the rear side These two lifting magnets were used by one of our customers as 'police magnets' in the meat processing industry. Both overband magnets are in excellent condition. The indicated price refers to one unit. Currently, 2 units are available for immediate delivery from stock! All information is provided without guarantee, offer valid while stocks last! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator Our core competency lies in delivering exactly what the customer truly needs. Together with our customers, we develop customized, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone as well to find a suitable solution for your application. Overband Plate Magnet Design in tightly welded stainless steel (VA 1.4301) Including cleaning drawer 420 x 420 x 200mm 420 x 420 x 250mm 620 x 420 x 200mm 620 x 520 x 200mm 800 x 500 x 200mm 800 x 520 x 250mm Completely welded stainless steel housing for protection of the magnet core Lifting eyes for suspension Cleaning drawer for easy removal of accumulated contaminants. Suitable for installation above all conveyor systems...

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration model / Exhibition machine / New machine Robust construction for long service life Infeed height: 200 mm Infeed width: 500 mm Number of chipper knives: 2 pcs Number of counter knives: 1 pc Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pcs Throughput: up to approx. 20 cubic meters/h* Chipping length: approx. 30 mm Chipper drive power: 45 kW or according to agreement Feed roller drive power: 2 x 2.2 kW Operating / control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW, number of knives, material feed S&F chipping machines and drum chippers with horizontal infeed are used in various sectors of the wood processing industry (sawmills, woodworks). The “ATH” series chippers produce high-quality and homogeneous wood chips from residual wood, with a low fine fraction—ideal as premium-grade chips for the pulp industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Minimal fines content - Low maintenance - Flexible application - Custom manufacturing Dkodpfx Aiow I R Rno Son Need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher