Lizdo gręžimo staklės

BACCI MOA

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine Gjdevca Izspfx Ap Ieiu TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Būklė: naudotas, Weinig Profimat 22 with 4 left-hand mobile spindles, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Giedpfxjryb D Ss Ap Iou Overall dimensions and weight: 330 x 145 x H160 cm. Weight 1400 kg (on pallet).

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 690924, Connected load: 380V 1.84kW Speed: 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing: 640 mm Spindle rotation direction: 11x right-hand, 10x left-hand, M10 thread 2x safety clamps Pneumatic foot switch Table size: 880 x 400 mm 1x side stop with 2 flip stops Gijdpoh U Damsfx Ap Iju 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact details.

Būklė: naudotas, Gamybos metai: 2009, BRIQUETTING MACHINE PRODECO MOD. L70 – CE COMPLIANT – USED - Briquette diameter: 70 mm - Output: 50-120 kg/h - Serial no.: 89 Gisdowrddqepfx Ap Ieu - Year: 2009 - Complete with manual

Būklė: naudotas, Gamybos metai: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" – complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal: clamping – drilling – releasing; electrical intermittent operation. - Automatic retraction of the drilling unit upon reaching the preset drilling depth. Godsxnlflopfx Ap Ioiu - Automatic extension of drilling depth for face-end drilling. This eliminates the need to manually adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, drilling depth flat face 14 mm, drilling depth end face 24 mm). - 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drilling feed 0–70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping carriage adjustable along the Y-axis, with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal positioning system comprising: - 1 positioning rail, 1800 mm, for shelf drilling (aluminum profile 40 x 40 mm) with 3 flip stops - With quick-change system, easily convertible from right to left for mirrored shelf drilling in carcass construction. Also suitable for line boring in System 32. - Side stops and position settings, as well as the drilling height adjustment over the support table, using mechanical digital counters. - Side stops are easily swung out for the shortest possible changeover times between carcass, frame, and line boring operations. - Clamping arms for the clamping carriage are designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drill bits: - 5 tungsten carbide dowel drill bits, Ø 8 x 77 mm, right-hand - 4 tungsten carbide dowel drill bits, Ø 8 x 77 mm, left-hand Base machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" as above. Additional features: - Suction funnel, dust-tested, Ø 120 mm - 1 set for line boring in system

Būklė: naudotas, Gamybos metai: 1968, Technical details: Drilling capacity in steel (diameter): 40 mm Throat depth: 380 mm Drilling stroke: 240 mm Spindle taper: MT 5 Spindle speed: n.a. rpm Feed rates: 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev (manual + automatic) Gedpjvpfzyefx Ap Isiu Max. distance spindle/table: 200 - 800 mm Table clamping surface: 540 x 730 mm Rotatable table: 360° Drill table adjustment: 600 mm (manual) Column diameter: Ø 220 mm Base plate clamping surface: W: 510 x L: 510 mm Total power requirement: 4.0 kW Machine weight approx.: 1300 kg Approx. machine dimensions (LxWxH): 1.2 x 0.95 x 2.35 m Operation via control panel and/or footswitch Mechanical thread cutting Incl. machine vice

Būklė: naudotas, Gamybos metai: 1954, Technical Specifications: Maximum ram stroke: 220 mm Maximum workpiece diameter: 400-450 mm Total power requirement: 1.5 kW Worktable dimensions: 650 x 250 mm Ram adjustment: 100 mm (manual) Ram stroke rates: 45 / 78 / 125 strokes per minute Table adjustment, longitudinal: 400 mm Table adjustment, transverse: 150-170 mm Table adjustment, vertical: approx. 360 mm Tool head swivel range: +/- 10 degrees Total power requirement: 1.5 kW Gsdpev Ty R Djfx Ap Ijiu Approx. machine weight: 0.9 t Approximate machine dimensions (LxWxH): 1.2 x 0.9 x 1.8 m

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISER Complete in standard configuration according to price list 01/22/D, with: - Precision collet chuck for ER 40 collets, Ø 3–26 mm. Includes collets Ø 10 / 13 / 16 / 20 - 1.5 kW motor, 2800 rpm - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm spacing, featuring: - Center detent and cross adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system comprising: 1 central stop and 1 stop for extra-wide frames 1 stop rod, approx. 850 mm long (can be switched left to right) 2 flip stops - Slot mortising attachment, lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swivel-mounted (left and right) Drill head receptacle 3-spindle drill head, 32 mm pitch (can be rotated 90°) Chassis with 4 castors, for easy relocation of the machine Gjdpfx Ajxdttiop Ijiu Availability: Immediately – short notice –

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 3750, Funkcionalumas: visiškai funkcionalus, The machine glues solid wood up to 18.0 mm and rolls up to 3.0 mm thick. It trims roll material (3.0 mm thick) such as PVC, ABS, and real wood up to 2.0 mm. Flush trimming up to 18 mm. Equipped with rounding and chamfering milling stations. Total length: 3.20 m. Power consumption: 7.1 kW. Glue pot, trimming shears, stepless feed, trimming saw for front and rear edges, flush milling unit, rounding milling unit, chassis, and 100 mm extraction connection. Gjdpfxsigad Ej Ap Ieiu

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 3 000 mm, MANNI karšto spaudimo presas - Stalo matmenys: 3000x1300 mm - 6 cilindrų Gisdpjx Rqtijfx Ap Ieu - Su karšto vandens katilu, kūrenamu medžio atliekomis