Sukamasis stalas

BÜCHE RTW 30

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface Nedporn Riqsfx Abaodd

Sąlyga: paruoštas naudoti (naudotas), tuščias svoris: 22 000 kg, Typ FTC75 Abstand zwischen den Spitzen: 8.000 mm Umlaufdurchmesser über Bett: 1.500 mm Nedpfx Abewkw Umsaodd Umlaufdurchmesser über Planschlitten: 1.100 mm Spindelbohrungsdurchmesser: 130 mm Anzahl der Drehzahlen: 3,6 – 720 U/min Gesamtanschlussleistung: 29,5 kW / 40 PS Maximales Werkstückgewicht zwischen den Spitzen: 11 t

Sąlyga: naujas, Unser Bestseller, wenn es darum geht, verschiedenste Arten von Federn herzustellen, einschließlich Torsions-, Doppeltorsions-, Zugfedern und Drahtbiegeteilen. Preisgünstig, aber hinsichtlich Produktionsgeschwindigkeit, Präzision und Vielseitigkeit äußerst wertvoll. Njdoi Ik D Espfx Abaedd

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Ndsdpertd Uwefx Abaod Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Sąlyga: geras (naudotas), Dividing head with 24-division direct indexing or via crank using scale 200 mm Röhm chuck overall height 165 mm Nododx D Rzopfx Abajdd depth 350 mm width 300 mm weight 34.5 kg

Sąlyga: geras (naudotas), Gamybos metai: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine, model making mill Njdpfx Asnzpx Rsbaedd - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle taper: SK30 - Drive: 1.1 kW - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos - Dimensions: 1000/680/H1970 mm - Weight: 477 kg

Sąlyga: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting Ndedpsk Egrpjfx Abajd - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 - Fixed center MT 4 - Change gear set - Position stop with fine adjustment - Initial fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1982, X ašies eiga: 1 650 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, stalo apkrova: 3 500 kg, Mitutoyo 3-axis digital readout Table: 2000 x 700 mm Travels: 1650 x 1000 x 1000 mm Automatic lubrication Ndedpfx Ajwxyzfebaed Spindle: ISO 40 taper, max spindle speed 2066 rpm Weight: 7500 kg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 7979, Table diameter: 400 mm Nedpfx Aob Ez R Uebaedd Table with 8 T-slots: 12 mm Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Sąlyga: naudotas, Gamybos metai: 1988, Grundig valdymas x eiga 700 mm y eiga 500 mm z eiga 400 mm Staklių svoris apie 2,8 t +++++ Atkreipkite dėmesį, kad įrenginys yra išmontuotas ir paruoštas pakrovimui. Dėl šios priežasties negalima atlikti demonstracijos su prijungta elektra ar nufilmuoti vaizdo įrašo. Nsdpsiqu S Eofx Abajdd Be to, mūsų skelbime yra pačios informatyviausios ir geriausios kokybės nuotraukos. Papildomų nuotraukų atsiųsti negalime. +++++