Popieriaus ritinio spaustukas

Auramo CTXAR-60RH0-13

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Hjdpfx Agevgrh Ujisi Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, kamuolio ilgis: 1 000 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 750 750 750 mm, balo svoris: 500 kg, įėjimo įtampa: 400 V, bendras svoris: 7 500 kg, alyvos bako talpa: 500 l, galia: 30 kW (40,79 AG), tuščias svoris: 7 500 kg, įėjimo dažnis: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Hedpsic Rl Djfx Agiji Bale size: 700 x 1,000 mm (W x H), adjustable length Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is operational; the drive motor is currently disassembled.

Gamybos metai: 2004, Sąlyga: paruoštas naudoti (naudotas), Connected load: 15.5 kW, weight: 6.8 t. Hjdjip D Rzepfx Agioi

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm Hodpewz Ev Tjfx Agioi length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Gamybos metai: 1988, Sąlyga: geras (naudotas), Komplettsatz Atlas Copco Kompressor mit Donaldson Ultra Filter und Behälter/Tank in gutem Betriebszustand. Hjdpfx Aehpx U Ajgiei

Sąlyga: paruoštas naudoti (naudotas), Diameterrange: 50 mm – 108 mm Hoogterange: 38 mm – 197 mm Hjdpfx Agjtqmryeiei Productiecapaciteit: tot 500 st./min Aantal koppen: 6

Sąlyga: paruoštas naudoti (naudotas), HSM VK 42/1200 Fully Automatic Baler Pressing force: 42 tonnes Bale dimensions: 700 x 800 x 600 – 1200 mm Bale weight: approx. 450 kg Hedpsra Nrxjfx Agiei Press length: approx. 7 metres Press weight: approx. 6000 kg Binding: 4 x automatic wire tying

Gamybos metai: 2001, Sąlyga: geras (naudotas), HSM-500.1_VL BALING PRESS PAPER PRESS FILM PRESS BALE PRESS Immediately operational, in good condition Used & good / see photos Model: HSM 500.1 VL Machine no.: 6135.244.P Serial no.: 220109689 Pressing force: 50 tons Voltage: 400 V; Frequency: 50 Hz Power: 7.5 kW Current: 15.5 A Compression force: 6 tons Year of manufacture: 2001 Other presses available in our other listings. Item is used and in good condition / roughly cleaned (Plug in and it's ready to go) Dimensions: On request!! Additional photos show further possible applications. All items visible in the photos are also available from us. Hjdpfelc Du Nox Agiei Net price per unit Ex stock 47441 Moers Current stock: 1 unit Inspection is expressly offered. More machinery in stock See photos or contact us by phone for details General information: We offer items from various acquisitions, described as accurately as possible, with detailed photos provided. Further details on the item cannot be given. Inspection appointments are possible Tuesday and Thursday from 9:00 to 16:00 by prior telephone arrangement. The item can be collected immediately if required. We can only respond to inquiries regarding this item if you include a telephone number in your message, due to time constraints. Unless otherwise explicitly stated, this offering is for USED GOODS. Packaging may be damaged. Items have been visually inspected and are technically sound to the best of our knowledge. All offers ex stock 47441 Moers. If you require shipping, please contact us so that we can discuss packaging and shipping costs. Please feel free to call if you are interested. All dimensions are approximate. Errors in the description reserved.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11415, Rotor diameter: 260 mm Rotor width: 260 mm Hsdpfjghgl Iox Agiei 3-knife rotor, 2 stator knife rows Feed opening approx. 260 x 260 mm Drive motor 5.5 kW Granulator with built-in feed device for bar stock. Weight approx. 500 kg

Sąlyga: paruoštas naudoti (naudotas), Techniniai duomenys Dixi 60 AUTOMAT presas Pakrovimo anga plt. x aukšt.: 1550 x 1000 mm Variklio galia: 31,5 kW Presavimo jėga: 60 t Ryšulio svoris (priklauso nuo medžiagos): 350–600 kg Hsdpfxov Amw No Agiji Ryšulio matmenys plt. x aukšt. x ilgis (reguliuojama): 1100 x 800 x 300–1600 mm Presavimo / ciklo laikas: 13/24 s Įrenginio svoris: 7000 kg